TPSMA6L54A

TVS Diodes Datasheet TPSMA6L Series Surface Mount – 600W Pb e3 RoHS Description Uni-directional The TPSMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by load dump and other transient voltage events, and it’s especially suitable for high reliability and automotive application. SMA low profile package (DO221-AC) has the same electronical performance as the SMB package but with low height profiles (1.1mm). Features & Benefits Additional Information Resources Accessories ■ Fast response time: typically less than 1.0ns from 0 Volts to VBR min ■ SMA low profile package: less than 1.1 mm ■ Built-in strain relief ■ Footprint compatibility with standard SMA and SMB products (easy to layout) ■ High temperature soldering: 260°C/10 seconds at terminals ■ IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact) E230531 ■ ESD protection of data lines in accordance with IEC 61000-4-2 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Peak Pulse Power Dissipation at TA=25ºC by 10x1000µs Waveform (Fig.2)(Note 1), (Note 2) Power Dissipation on Infinite Heat Sink at TA=50OC Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only Operating Junction and Storage Temperature Range Typical Thermal Resistance Junction to Lead Typical Thermal Resistance Junction to Ambient ■ Hi reliability application and automotive grade AEC Q101 qualified ■ Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c Agency File Number Parameter ■ Low inductance, excellent clamping capability ■ Typical failure mode is short from over-specified voltage or current Samples Agency Approvals Agency ■ Same power as standard SMB devices (600 W) Symbol Value Unit PPPM 600 W PM(AV) 3 W IFSM 60 A VF 3.5V V TJ , TSTG -65 to 150 °C RθJL 35 °C/W RθJA 200 °C/W ■ EFT protection of data lines in accordance with IEC 61000-44 (IEC801-4) ■ Glass passivated junction ■ Plastic package has underwriters laboratory flammability V-0 ■ Typical maximum temperature coefficient ΔVBR = 0.1% x VBR@25°C x ΔT ■ Matte tin lead–free plated ■ Halogen free and RoHS compliant ■ Pb-free E3 means 2nd level interconnect is Pb-free and the terminal Applications TVS devices are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Functional Diagram Bi-directional Cathode Anode Uni-directional Notes: 1. Non-repetitive current pulse, per Fig.4 and derated above TA=25ºC per Fig. 3. 2. Mounted on 5.0x5.0mm copper pad to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only. 1 © 2023 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD.05/24/23 TVS Diodes Datasheet TPSMA6L Series Surface Mount – 600W Electrical Characteristics Part Number (Uni) Marking Reverse Stand off Voltage VR (Volts) Breakdown Voltage VBR (Volts) @ IT Test Current IT MIN MAX (mA) Maximum Clamping Voltage VC @ Ipp (V) Maximum Peak Pulse Current Ipp (A) Maximum Reverse Leakage IR @ VR (µA) Agency Approval TPSMA6L5.0A AEA 5.0 6.40 7.00 10 9.2 65.3 800 X TPSMA6L6.0A AGA 6.0 6.67 7.37 10 10.3 58.3 800 X TPSMA6L6.5A AKA 6.5 7.22 7.98 10 11.2 53.6 500 X TPSMA6L7.0A AMA 7.0 7.78 8.60 10 12.0 50.0 200 X TPSMA6L7.5A APA 7.5 8.33 9.21 1 12.9 46.6 100 X TPSMA6L8.0A ARA 8.0 8.89 9.83 1 13.6 44.2 50 X TPSMA6L8.5A ATA 8.5 9.44 10.40 1 14.4 41.7 20 X TPSMA6L9.0A AVA 9.0 10.00 11.10 1 15.4 39.0 10 X TPSMA6L10A AXA 10.0 11.10 12.30 1 17.0 35.3 5 X TPSMA6L11A AZA 11.0 12.20 13.50 1 18.2 33.0 1 X TPSMA6L12A BEA 12.0 13.30 14.70 1 19.9 30.2 1 X TPSMA6L13A BGA 13.0 14.40 15.90 1 21.5 28.0 1 X TPSMA6L14A BKA 14.0 15.60 17.20 1 23.2 25.9 1 X TPSMA6L15A BMA 15.0 16.70 18.50 1 24.4 24.6 1 X TPSMA6L16A BPA 16.0 17.80 19.70 1 26.0 23.1 1 X TPSMA6L17A BRA 17.0 18.90 20.90 1 27.6 21.8 1 X TPSMA6L18A BTA 18.0 20.00 22.10 1 29.2 20.6 1 X TPSMA6L20A BVA 20.0 22.20 24.50 1 32.4 18.6 1 X TPSMA6L22A BXA 22.0 24.40 26.90 1 35.5 16.9 1 X TPSMA6L24A BZA 24.0 26.70 29.50 1 38.9 15.5 1 X TPSMA6L26A CEA 26.0 28.90 31.90 1 42.1 14.3 1 X TPSMA6L28A CGA 28.0 31.10 34.40 1 45.4 13.3 1 X TPSMA6L30A CKA 30.0 33.30 36.80 1 48.4 12.4 1 X TPSMA6L33A CMA 33.0 36.70 40.60 1 53.3 11.3 1 X TPSMA6L36A CPA 36.0 40.00 44.20 1 58.1 10.4 1 X TPSMA6L40A CRA 40.0 44.40 49.10 1 64.5 9.3 1 X TPSMA6L43A CTA 43.0 47.80 52.80 1 69.4 8.7 1 X X TPSMA6L45A CVA 45.0 50.00 55.30 1 72.7 8.3 1 TPSMA6L48A CXA 48.0 53.30 58.90 1 77.4 7.8 1 X TPSMA6L51A CZA 51.0 56.70 62.70 1 82.4 7.3 1 X TPSMA6L54A REA 54.0 60.00 66.30 1 87.1 6.9 1 X TPSMA6L58A RGA 58.0 64.40 71.20 1 93.6 6.5 1 X TPSMA6L60A RKA 60.0 66.70 73.70 1 96.8 6.2 1 X TPSMA6L64A RMA 64.0 71.10 78.60 1 103.0 5.9 1 X TPSMA6L70A RPA 70.0 77.80 86.00 1 113.0 5.3 1 X TPSMA6L75A RRA 75.0 83.30 92.10 1 121.0 5.0 1 X TPSMA6L78A RTA 78.0 86.70 95.80 1 126.0 4.8 1 X TPSMA6L85A RVA 85.0 94.40 104.00 1 137.0 4.4 1 X 2 © 2023 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD.05/24/23 TVS Diodes Datasheet TPSMA6L Series Surface Mount – 600W I-V Curve Characteristics Uni-directional Vc VBR VR IR VF IT V Ipp PPPM Peak Pulse Power Dissipation - Max power dissipation VR Stand-off Voltage - Maximum voltage that can be applied to the TVS without operation VBR Breakdown Voltage - Maximum voltage that flows though the TVS at a specified test current (IT) VC Clamping Voltage - Peak voltage measured across the suppressor at a specified Ippm (peak impulse current) IR Reverse Leakage Current - Current measured at VR VF Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 1: TVS Transients Clamping Waveform Figure 2: Peak Pulse Power Rating Curve 100 PPPM-Peak Pulse Power (kW) Voltage Transients Voltage or Current Voltage Across TVS Current Through TVS 10 1 0.2x0.2" (5.0x5.0mm) Copper Pad Area 0.1 0.001 0.01 0.1 1 td-Pulse Width (ms.) Time continues on next page. 3 © 2023 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD.05/24/23 TVS Diodes Datasheet TPSMA6L Series Surface Mount – 600W Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued) Figure 3: Pulse Derating Curve Figure 4: Pulse Waveform 150 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 100 80 60 40 20 0 0 25 50 75 100 125 150 tr=10µsec Peak Value IPPM 100 Half Value IPPM IPPM ( ) 2 50 10/1000µsec. Waveform as defined by R.E.A td 0 175 PM(AV), Steady State Power Dissipation (W) Cj (pF) Uni-directional V=0V Uni-directional @VR 100 10 Tj=25ºC f=1.0MHz Vsig=50mVp-p 10.0 1000.0 100.0 3.0 4.0 Figure 6: Steady State Power Dissipation Derating Curve 10000 1.0 2.0 t-Time (ms) Figure 5: Typical Junction Capacitance 1 1.0 0 TJ-Initial Junction Temperature (ºC) 1000 TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 3.6 RθJA=RθJL 3.0 2.4 1.8 1.2 RθJA=200°C/W 0.6 0 0 VBR - Reverse Breakdown Voltage (V) 25 50 75 100 125 150 TA - Ambient Temperature (ºC) 175 Figure 6: Typical Transient Thermal Impedance 1000 Transient Thermal impedance ( /W) R JA 100 R JL 10 1 bargaining 0,1 0,01 0,01 0,1 1 10 100 1000 t-Pulse Width (s) 4 © 2023 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD.05/24/23 TVS Diodes Datasheet TPSMA6L Series Surface Mount – 600W Soldering Parameters - Temperature Min (Ts(min)) Lead–free assembly 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 120 secs Pre Heat Ramp-up TL Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Time (min to max) (tL) 60 – 150 seconds Peak Temperature (TP) 260 Time within 5°C of actual peak Temperature (tp) 30 seconds max Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes max. Do not exceed 280°C +0/-5 Polarity Terminal Critical Zone TL to TP Ramp-down Ts(min) ts Preheat °C 25˚C t 25˚C to Peak Time (t) Environmental Specifications 0.002 ounce, 0.061 gram JEDEC DO-221AC Molded Plastic over glass passivated junction Color band denotes cathode except Bipolar Matte Tin-plated leads, Solderable per JESD22-B102D Case tL Ts(max) Physical Specifications Weight tp TP Temperature (T) Reflow Condition Temperature Cycle JESD22-A104 Pressure Cooker JESD22-A102 High Temp. Storage JESD22-A103 HTRB JESD22-A108 Thermal Shock JESD22-A106 Dimensions Cathode Band Dimensions C A A B G E F E D 3.12 (0.123) Inches Millimeters Min Max Min Max 0.156 0.181 3.950 4.600 5.600 B 0.189 0.220 4.800 C 0.049 0.069 1.250 1.750 D 0.088 0.116 2.250 2.950 E 0.030 0.059 0.750 1.500 F 0.005 0.010 0.125 0.250 G 0.035 0.043 0.900 1.100 1 .20 (0.047) 1.52 (0.060) Mounting Pad Layout 5 © 2023 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD.05/24/23 TVS Diodes Datasheet TPSMA6L Series Surface Mount – 600W Part Marking System Part Numbering System TPSMA6L xx A F Cathode Band 5% VBR VOLTAGE TOLERANCE VR VOLTAGE XXX SERIES YMXXX Littelfuse Logo Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Packaging Part number Component Package Quantity Packaging Option Packaging Specification TPSMA6LxxA DO-221AC 3000 Tape & Reel – 12mm/7” tape EIA RS-481 Tape and Reel Specification 0.157 (4.0) Cathode 0.47 (12.0) 0.157 (4.0) 0.059 DIA (1.5) Cover tape 7.0 (178) 0.80 (20.2) Arbor Hole Dia. 0.49 (12.5) Dimensions are in inches (and millimeters). Direction of Feed Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics 6 © 2023 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD.05/24/23