TPSMB16CA-VR

TVS Diodes Surface Mount – 600W > TPSMB-VR series TPSMB-VR Series RoHS Pb e3 Description The TPSMB-VR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Uni-directional Features Bi-directional Agency Recognitions Agency Agency File Number E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Symbol Value Unit Peak Pulse Power Dissipation by 10/1000µs waveform (Fig.1)(Note 1), (Note 2) Parameter PPPM 600 W Power Dissipation on infinite heat sink at TL=50OC PM(AV) 5.0 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 100 A Maximum Instantaneous Forward Voltage at 50A for Unidirectional only VF 3.5/5 V Operating Junction Temperature Range (VR≤ 78V) TJ -65 to 175 °C Operating Junction Temperature Range (VR>78V) TJ -65 to 150 °C Storage Temperature Range TSTG -65 to 175 °C Typical Thermal Resistance Junction to Lead RuJL 20 °C/W Typical Thermal Resistance Junction to Ambient RuJA 100 °C/W Notes: 1. Non-repetitive current pulse per Fig. 4 and derated above TA = 25OC per Fig. 3. 2. Mounted on copper pad area of 0.2x0.2” (5.0 x 5.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional component only,duty cycle=4 per minute maximum. 4.VF 10V • High temperature soldering guaranteed: 260°C/10 seconds at terminals • UL Recognized compound meeting flammability rating V-0. • Meet MSL level1, per J-STD-020, high temperature soldering guaranteed. • Matte tin lead–free plated • Halogen free and RoHS compliant • Pb-free E3 means 2nd level interconnect is Pbfree and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01) • Recognized to UL 497B as an Isolated Loop Circuit Protector Applications TVS components are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Automotive applications. Bi-directional Cathode Anode Uni-directional © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 12/16/20 TVS Diodes Surface Mount – 600W > TPSMB-VR series Electrical Characteristics (T =25°C unless otherwise noted) A Part Number (Uni) Part Number (Bi) Marking UNI BI Typical Reverse IR @ Stand off 150OC Voltage VR (μA) (Volts) TPSMB6.5A-VR KKA 500 6.5 TPSMB7.0A-VR KMA 200 7.0 TPSMB7.5A-VR KPA 100 7.5 TPSMB8.0A-VR KRA 50 8.0 TPSMB8.5A-VR TPSMB8.5CA-VR KTA ATA 50 8.5 TPSMB9.0A-VR TPSMB9.0CA-VR KVA AVA 20 9.0 TPSMB10A-VR TPSMB10CA-VR KXA AXA 8 10.0 TPSMB11A-VR TPSMB11CA-VR KZA AZA 8 11.0 TPSMB12A-VR TPSMB12CA-VR LEA BEA 8 12.0 TPSMB13A-VR TPSMB13CA-VR LGA BGA 8 13.0 TPSMB14A-VR TPSMB14CA-VR LKA BKA 8 14.0 TPSMB15A-VR TPSMB15CA-VR LMA BMA 8 15.0 TPSMB16A-VR TPSMB16CA-VR LPA BPA 8 16.0 TPSMB17A-VR TPSMB17CA-VR LRA BRA 8 17.0 TPSMB18A-VR TPSMB18CA-VR LTA BTA 8 18.0 TPSMB20A-VR TPSMB20CA-VR LVA BVA 8 20.0 TPSMB22A-VR TPSMB22CA-VR LXA BXA 8 22.0 TPSMB24A-VR TPSMB24CA-VR LZA BZA 8 24.0 TPSMB26A-VR TPSMB26CA-VR MEA CEA 8 26.0 TPSMB28A-VR TPSMB28CA-VR MGA CGA 8 28.0 TPSMB30A-VR TPSMB30CA-VR MKA CKA 8 30.0 TPSMB33A-VR TPSMB33CA-VR MMA CMA 8 33.0 TPSMB36A-VR TPSMB36CA-VR MPA CPA 8 36.0 TPSMB40A-VR TPSMB40CA-VR MRA CRA 8 40.0 TPSMB43A-VR TPSMB43CA-VR MTA CTA 8 43.0 TPSMB45A-VR TPSMB45CA-VR MVA CVA 8 45.0 TPSMB48A-VR TPSMB48CA-VR MXA CXA 8 48.0 TPSMB51A-VR TPSMB51CA-VR MZA CZA 8 51.0 TPSMB54A-VR TPSMB54CA-VR NEA DEA 8 54.0 TPSMB58A-VR TPSMB58CA-VR NGA DGA 8 58.0 TPSMB60A-VR TPSMB60CA-VR NKA DKA 8 60.0 TPSMB64A-VR TPSMB64CA-VR NMA DMA 8 64.0 TPSMB70A-VR TPSMB70CA-VR NPA DPA 8 70.0 TPSMB75A-VR TPSMB75CA-VR NRA DRA 8 75.0 TPSMB78A-VR TPSMB78CA-VR NTA DTA 8 78.0 TPSMB85A-VR TPSMB85CA-VR NVA DVA 85.0 TPSMB90A-VR TPSMB90CA-VR NXA DXA 90.0 TPSMB100A-VR TPSMB100CA-VR NZA DZA 100.0 TPSMB110A-VR TPSMB110CA-VR PEA EEA 110.0 TPSMB120A-VR TPSMB120CA-VR PGA EGA 120.0 TPSMB130A-VR TPSMB130CA-VR PKA EKA 130.0 TPSMB150A-VR TPSMB150CA-VR PMA EMA 150.0 TPSMB160A-VR TPSMB160CA-VR PPA EPA 160.0 TPSMB170A-VR TPSMB170CA-VR PRA ERA 170.0 TPSMB180A-VR TPSMB180CA-VR PTA ETA 180.0 TPSMB188A-VR TPSMB188CA-VR PBA EBA 188.0 TPSMB200A-VR TPSMB200CA-VR PVA EVA 200.0 TPSMB220A-VR TPSMB220CA-VR PXA EXA 220.0 TPSMB250A-VR TPSMB250CA-VR PZA EZA 250.0 TPSMB300A-VR TPSMB300CA-VR QEA FEA 300.0 TPSMB350A-VR TPSMB350CA-VR QGA FGA 350.0 TPSMB400A-VR TPSMB400CA-VR QKA FKA 400.0 TPSMB440A-VR TPSMB440CA-VR QMA FMA 440.0 Note: For bidirectional type having VR of 10 volts and less, the IR limit is double. VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25))(αT:Temperature Coefficient, typical value is 0.1%) Breakdown Voltage VBR (Volts) @ IT MIN MAX 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 111.00 122.00 133.00 144.00 167.00 178.00 189.00 201.00 209.00 224.00 246.00 279.00 335.00 391.00 447.00 492.00 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 197.00 209.00 222.00 231.00 247.00 272.00 309.00 371.00 432.00 494.00 543.00 Test Maximum Maximum Maximum Maximum Agency Peak Reverse Current Clamping Temperature Approval Voltage VC Pulse Leakage coefficient IT @ Ipp Current IR @ VR of VBR (%/C (mA) (V) Ipp (A) (µA) 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 292.0 304.0 324.0 356.0 405.0 486.0 567.0 648.0 713.0 53.6 50.0 46.6 44.2 41.7 39.0 35.3 33.0 30.2 28.0 25.9 24.6 23.1 21.8 20.6 18.6 16.9 15.5 14.3 13.3 12.4 11.3 10.4 9.3 8.7 8.3 7.8 7.3 6.9 6.5 6.2 5.9 5.3 5.0 4.8 4.4 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.2 2.1 2.0 1.9 1.7 1.5 1.3 1.1 0.9 0.9 500 200 100 50 20 10 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0.052 0.058 0.061 0.064 0.066 0.069 0.071 0.074 0.075 0.076 0.080 0.083 0.084 0.085 0.088 0.091 0.092 0.092 0.093 0.094 0.096 0.097 0.098 0.099 0.100 0.101 0.101 0.101 0.102 0.103 0.103 0.104 0.105 0.106 0.106 0.106 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.112 0.112 0.112 0.112 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X - © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 12/16/20 TVS Diodes Surface Mount – 600W > TPSMB-VR series I-V Curve Characteristics Uni-directional I I Bi-directional Ipp Vc VBR VR IR VF IT IT IR Vc VBR VR V IR IT V Ipp Ipp PPPM VR VBR VC IR VF VR VBR Vc Peak Pulse Power Dissipation -- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (T =25°C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Curve PPPM-Peak Pulse Power (KW) Voltage Transients Voltage or Current Voltage Across TVS Current Through TVS Time 100 10 1 0.31x0.31" (8.0x8.0mm) Copper Pad Area 0.1 0.001 0.01 0.1 1 10 td-Pulse Width (ms) continues on next page. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 12/16/20 TVS Diodes Surface Mount – 600W > TPSMB-VR series Ratings and Characteristic Curves (T =25°C unless otherwise noted) (Continued) A Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform 150 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 100 80 VR≤78V 60 40 VR>78V 20 0 0 25 50 75 100 125 150 175 tr=10µsec Peak Value IPPM 100 Half Value IPPM IPPM ( ) 2 50 0 200 10/1000µsec. Waveform as defined by R.E.A td 0 TA-Ambient temperature (ºC) IFSM - Peak Forward Surge Current (A) Uni-directional V=0V Cj (pF) Uni-directional @VR 100 1 1 Bi-directional @VR 4.0 100 80 60 40 20 0 10 3.0 120 1000 Tj=25C f=1.0MHz Vsig=50mVp-p 2.0 Figure 6 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only Bi-directional V=0V 10 1.0 t-Time (ms) Figure 5 - Typical Junction Capacitance 10000 TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 100 VBR - Reverse Breakdown Voltage (V) 1000 1 10 100 Number of half-cycles at 60 Hz © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 12/16/20 TVS Diodes Surface Mount – 600W > TPSMB-VR series Soldering Parameters Lead–free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 120 secs Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Time (min to max) (ts) 60 – 150 seconds Peak Temperature (TP) 260 Time within 5°C of actual peak Temperature (tp) 30 seconds max Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes max. Do not exceed 260°C +0/-5 tp TP Ramp-up TL Temperature (T) Reflow Condition Critical Zone TL to TP tL Ts(max) Ramp-down Ts(min) ts Preheat °C 25˚C t 25˚C to Peak Time (t) Environmental Specifications Physical Specifications High Temp. Storage JESD22-A103 HTRB JESD22-A108 Polarity 0.003 ounce, 0.093 grams JEDEC DO214AA. Molded plastic body over glass passivated junction Color band denotes cathode for unidirectional components Temperature Cycling JESD22-A104 Terminal Matte Tin-plated leads, Solderable per JESD22-B102 MSL JEDEC-J-STD-020, Level 1 H3TRB JESD22-A101 RSH JESD22-A111 Weight Case Dimensions DO-214AA (SMB J-Bend) Dimensions Cathode Band C A B H D F E G J K Dimension in inches and (millimeters) L Inches Millimeters Min Max Min Max A 0.077 0.086 1.950 2.200 B 0.160 0.180 4.060 4.570 C 0.130 0.155 3.300 3.940 2.440 D 0.084 0.096 2.130 E 0.030 0.060 0.760 1.520 F - 0.008 - 0.203 G 0.205 0.220 5.210 5.590 H 0.006 0.012 0.152 0.305 I 0.089 - 2.260 - J 0.085 - 2.160 - K - 0.107 - 2.740 L 0.085 - 2.160 - I Solder Pads (all dimensions in mm) © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 12/16/20 TVS Diodes Surface Mount – 600W > TPSMB-VR series Part Numbering System TPSMB Part Marking System XXX C A -VR Cathode Band F For Uni-Directional Component Only Naming Rule XXXX 5% VBR Voltage Tolerance YMXXX Bi-Directional VR Voltage Littelfuse Logo Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Series Packaging Component Package Part number TPSMBxxxXX-VR Quantity DO-214AA 3000 Packaging Option Packaging Specification Tape & Reel - 12mm tape/13” reel EIA STD RS-481 Tape and Reel Specification 0.157 (4.0) For unidirectional version 0.47 (12.0) Cathode 0.315 (8.0) 0.059 DIA (1.5) Cover tape 13.0 (330) 0.80 (20.2) Arbor Hole Dia. 0.49 (12.5) Dimensions are in inches (and millimeters). Direction of Feed Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 12/16/20