TPSMB200A

TVS Diode Datasheet TPSMB Series Surface Mount – 600W RoHS Pb e3 Description The TPSMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional Bi-directional ■ Fast response time: typically less than 1.0ns from 0V to VBR min ■ Surface mount component to optimize board space ■ Excellent clamping capability ■ Low profile package ■ Low incremental surge resistance ■ Typical failure mode is short from over-specified voltage or current ■ UL Recognized compound meeting flammability rating V-0 ■ Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c Agency Number E230531 Maximum Ratings & Thermal Characteristics (TA=25°C unless otherwise noted) Symbol Value Unit Peak Pulse Power Dissipation by 10/1000µs waveform (Fig.1)(Note 1), (Note 2) Parameter PPPM 600 W Power Dissipation on infinite heat sink at TL=50OC PM(AV) 5.0 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 100 A Maximum Instantaneous Forward Voltage at 50A for Unidirectional only (Note 4) VF 3.5/5 V Operating Junction Temperature Range (VBR≤ 91V) TJ -65 to 175 Operating Junction Temperature Range (VBR > 91V) TJ -65 to 150 Storage Temperature Range TSTG -65 to 175 Typical Thermal Resistance Junction to Lead RθJL 20 °C/W Typical Thermal Resistance Junction to Ambient RθJA 100 °C/W ■ Typical IR ≤ 1µA for VR>10.2V ■ Meet MSL level1, per J-STD-020, High temperature soldering guaranteed: ■ ESD protection of data lines in 260°C/10 seconds at terminals accordance with IEC 61000-4- ■ Matte tin lead–free plated 2 30kV(Air), 30kV (Contact) ■ Halogen free and RoHS ■ EFT protection of data lines in compliant accordance with ■ Pb-free E3 means 2nd level IEC 61000-4-4 interconnect is Pb-free and ■ Glass passivated chip junction the terminal finish material is ■ 600W PPPM (peak pulse tin(Sn) (IPC/JEDEC J-STDpower) capability at 10/1000μs 609A.01) waveform, repetition rate (duty cycles):0.01% Agency Approvals Agency ■ High reliability application and automotive grade AEC Q101 qualified Applications TVS components are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Automotive applications. Functional Diagram °C Bi-directional Notes: 1. Non-repetitive current pulse, per Fig.4 and derated above TA=25ºC per Fig. 3. 2. Mounted on copper pad area of 0.2x0.2” (5.0 x 5.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional component only,duty cycle=4 per minute maximum. 4. VF < 3.5V for part number with Vbr < 300V, VF < 5.0V for part number with Vbr > =300V. Cathode Anode Uni-directional 1 © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.12/03/20 TVS Diode Datasheet TPSMB Series Surface Mount – 600W Electrical Characteristics (TA=25°C unless otherwise noted) Part Number (Uni) Part Number (Bi) TPSMB7.5A TPSMB8.2A TPSMB9.1A TPSMB10A TPSMB11A TPSMB12A TPSMB13A TPSMB15A TPSMB16A TPSMB18A TPSMB20A TPSMB22A TPSMB24A TPSMB27A TPSMB30A TPSMB33A TPSMB36A TPSMB39A TPSMB43A TPSMB47A TPSMB51A TPSMB56A TPSMB58A TPSMB62A TPSMB64A TPSMB68A TPSMB75A TPSMB82A TPSMB91A TPSMB100A TPSMB110A TPSMB120A TPSMB130A TPSMB150A TPSMB160A TPSMB170A TPSMB180A TPSMB200A TPSMB210A TPSMB220A TPSMB250A TPSMB300A-A TPSMB350A-A TPSMB400A-A TPSMB440A-A TPSMB480A-A TPSMB510A-A TPSMB520A-A TPSMB530A-A TPSMB540A-A TPSMB550A-A - TPSMB10CA TPSMB11CA TPSMB12CA TPSMB13CA TPSMB15CA TPSMB16CA TPSMB18CA TPSMB20CA TPSMB22CA TPSMB24CA TPSMB27CA TPSMB30CA TPSMB33CA TPSMB36CA TPSMB39CA TPSMB43CA TPSMB47CA TPSMB51CA TPSMB56CA TPSMB58CA TPSMB62CA TPSMB64CA TPSMB68CA TPSMB75CA TPSMB82CA TPSMB91CA TPSMB100CA TPSMB110CA TPSMB120CA TPSMB130CA TPSMB150CA TPSMB160CA TPSMB170CA TPSMB180CA TPSMB200CA TPSMB210CA TPSMB220CA TPSMB250CA TPSMB300CA-A TPSMB350CA-A TPSMB400CA-A TPSMB440CA-A TPSMB480CA-A TPSMB510CA-A TPSMB520CA-A TPSMB530CA-A TPSMB540CA-A TPSMB550CA-A TPSMB600CA-A TPSMB650CA-A Marking Uni 7V5AA 8V2AA 9V1AA 10AA 11AA 12AA 13AA 15AA 16AA 18AA 20AA 22AA 24AA 27AA 30AA 33AA 36AA 39AA 43AA 47AA 51AA 56AA 58AA 62AA 64AA 68AA 75AA 82AA 91AA 100A 110A 120A 130A 150A 160A 170A 180A 200A 210A 220A 250A 300A 350A 400A 440A 480A 510A 520A 530A 540A 550A - Bi 10CA 11CA 12CA 13CA 15CA 16CA 18CA 20CA 22CA 24CA 27CA 30CA 33CA 36CA 39CA 43CA 47CA 51CA 56CA 58CA 62CA 64CA 68CA 75CA 82CA 91CA 100C 110C 120C 130C 150C 160C 170C 180C 200C 210C 220C 250C 300C 350C 400C 440C 480C 510C 520C 530C 540C 550C 600C 650C Typical Reverse Breakdown Maximum Test IR @ Stand off Voltage VBR Clamping Current 150°C Voltage VR (Volts) @ IT Voltage VC IT (mA) (μA) (Volts) @ Ipp (V) Min Max 500 6.40 7.13 7.88 10 11.3 200 7.02 7.79 8.61 10 12.1 50 7.78 8.65 9.55 1 13.4 20 8.55 9.50 10.50 1 14.5 8 9.40 10.50 11.60 1 15.6 8 10.20 11.40 12.60 1 16.7 8 11.10 12.40 13.70 1 18.2 8 12.80 14.30 15.80 1 21.2 8 13.60 15.20 16.80 1 22.5 8 15.30 17.10 18.90 1 25.5 8 17.10 19.00 21.00 1 27.7 8 18.80 20.90 23.10 1 30.6 8 20.50 22.80 25.20 1 33.2 8 23.10 25.70 28.40 1 37.5 8 25.60 28.50 31.50 1 41.4 8 28.20 31.40 34.70 1 45.7 8 30.80 34.20 37.80 1 49.9 8 33.30 37.10 41.00 1 53.9 8 36.80 40.90 45.20 1 59.3 8 40.20 44.70 49.40 1 64.8 8 43.60 48.50 53.60 1 70.1 8 47.80 53.20 58.80 1 77.0 8 52.78 55.10 60.90 1 79.8 8 53.00 58.90 65.10 1 85.0 8 54.40 60.80 67.20 1 86.90 8 58.10 64.60 71.40 1 92.0 8 64.10 71.30 78.80 1 103.0 8 70.10 77.90 86.10 1 113.0 8 77.80 86.50 95.50 1 125.0 85.50 95.00 105.00 1 137.0 94.00 105.00 116.00 1 152.0 102.00 114.00 126.00 1 165.0 111.00 124.00 137.00 1 179.0 128.00 143.00 158.00 1 207.0 136.00 152.00 168.00 1 219.0 145.00 162.00 179.00 1 234.0 154.00 171.00 189.00 1 246.0 171.00 190.00 210.00 1 274.0 179.60 199.50 220.50 1 288.0 185.00 209.00 231.00 1 328.0 214.00 237.00 263.00 1 344.0 256.00 285.00 315.00 1 414.0 300.00 332.00 368.00 1 482.0 342.00 380.00 420.00 1 548.0 376.00 418.00 462.00 1 602.0 408.00 456.00 504.00 1 658.0 434.00 485.00 535.00 1 698.0 443.00 494.50 545.50 1 718.0 451.00 503.50 556.50 1 725.0 460.00 513.00 567.00 1 740.0 468.00 522.50 577.50 1 760.0 511.00 570.00 630.00 1 828.0 553.00 617.50 682.50 1 897.0 Maximum Peak Pulse Current Ipp (A) 54.0 50.4 45.5 42.1 39.1 36.5 33.5 28.8 27.1 24.2 22.0 19.9 18.4 16.3 14.7 13.3 12.2 11.3 10.3 9.4 8.7 7.9 7.7 7.2 7.0 6.6 5.9 5.4 4.9 4.5 4.0 3.7 3.4 2.9 2.8 2.6 2.5 2.2 2.1 1.9 1.8 1.5 1.3 1.1 1.0 0.9 0.9 0.9 0.8 0.8 0.8 0.8 0.8 Maximum Maximum Agency Reverse Temperature Approval Leakage IR coefficient @ VR (µA) of VBR (%/C) 500 200 50 10 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0.052 0.058 0.063 0.066 0.069 0.071 0.074 0.076 0.080 0.083 0.085 0.088 0.091 0.092 0.093 0.094 0.096 0.097 0.098 0.099 0.100 0.101 0.101 0.102 0.102 0.103 0.104 0.105 0.106 0.106 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.112 0.112 0.112 0.112 0.112 0.112 0.112 0.112 0.112 0.112 0.112 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X - Note: 1. For bidirectional type having VR of 10 volts and less, the IR limit is double. 2. VBR @TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient). 3: The CTI (Comparative Tracking Index) of TPSMB600CA-A and TPSMB650CA-A is 600 and other parts is 550 2 © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.12/03/20 TVS Diode Datasheet TPSMB Series Surface Mount – 600W I-V Curve Characteristics Uni-directional I I Bi-directional Ipp Vc VBR VR IR V F IT IT IR VC VBR VR V IR IT Ipp VR VBR VC V Ipp PPPM Peak Pulse Power Dissipation -- Max power dissipation VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation VBR Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) VC Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) IR Reverse Leakage Current -- Current measured at VR VF Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Curve PPPM-Peak Pulse Power (KW) Voltage Transients Voltage or Current Voltage Across TVS Current Through TVS 100 10 1 0.31x0.31" (8.0x8.0mm) Copper Pad Area 0.1 0.001 0.01 Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform 100 150 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 10 1 td-Pulse Width (ms) Time 80 VBR≤91V 60 40 VBR>91V 20 0 0.1 0 25 50 75 100 125 150 175 tr=10µsec Peak Value IPPM 100 Half Value IPPM IPPM ( ) 2 50 0 200 TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 10/1000µsec. Waveform as defined by R.E.A td 0 1.0 2.0 3.0 4.0 t-Time (ms) TJ - Initial Junction Temperature (ºC) 3 © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.12/03/20 TVS Diode Datasheet TPSMB Series Surface Mount – 600W Figure 6 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only Figure 5 - Typical Junction Capacitance 120 10000 IFSM - Peak Forward Surge Current (A) Bi-directional V=0V Uni-directional V=0V Cj (pF) 1000 Uni-directional @VR 100 10 Bi-directional @VR Tj=25C f=1.0MHz Vsig=50mVp-p 1 1 100 80 60 40 20 0 10 1 1000 100 10 100 Number of half-cycles at 60 Hz VBR - Reverse Breakdown Voltage (V) Soldering Parameters Lead–free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 120 secs Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Time (min to max) (ts) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 30 seconds max Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes max. Do not exceed 260°C Ramp-up TL Polarity 0.003 ounce, 0.093 gram JEDEC DO214AA. Molded plastic body over glass passivated junction Color band denotes cathode for unidirectional components. Terminal Matte Tin-plated leads, Solderable per JESD22-B102 Case tL Critical Zone TL to TP Ts(max) Ramp-down Ts(min) ts Preheat 25˚C t 25˚C to Peak Time (t) Physical Specifications Weight tp TP Temperature (T) Reflow Condition Environmental Specifications 4 High Temp. Storage JESD22-A103 HTRB JESD22-A108 Temperature Cycling JESD22-A104 MSL JEDEC-J-STD-020, Level 1 H3TRB JESD22-A101 RSH JESD22-A111 © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.12/03/20 TVS Diode Datasheet TPSMB Series Surface Mount – 600W Dimensions DO-214AA (SMB J-Bend) Inches Dimensions Cathode Band For Unidirectional Components C A B H D Millimeters Min Max Min Max A 0.077 0.086 1.950 2.200 B 0.160 0.180 4.060 4.570 C 0.130 0.155 3.300 3.940 2.440 D 0.084 0.096 2.130 E 0.030 0.060 0.760 1.520 F - 0.008 - 0.203 G 0.205 0.220 5.210 5.590 H 0.006 0.012 0.152 0.305 I 0.089 - 2.260 - J 0.085 - 2.160 - K - 0.107 - 2.740 L 0.085 - 2.160 - Note: Dimension in inches and (millimeters) F E G L K J I Solder Pads Part Marking System Part Numbering System TPSMB XXX C A [-A] F Cathode Band for Unidirectional Components XXXX YMXXX Design Code Littelfuse Logo 5% VBR Voltage Tolerance Bi-directional VBR Voltage Marking Code Series Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Packaging Part Number Component Package Quantity Packaging Option Packaging Specification TPSMBxxxXX DO-214AA 3000 Tape & Reel - 12mm tape/13” reel EIA STD RS-481 5 © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.12/03/20 TVS Diode Datasheet TPSMB Series Surface Mount – 600W Tape and Reel Specification 0.157 (4.0) Note: Dimensions are in inches (and millimeters). 0.47 (12.0) 0.059 DIA (1.5) 0.315 (8.0) Cover tape 13.0 (330) Cathode Mark For Unidirectional Components 0.80 (20.2) Arbor Hole Dia. Direction of Feed 0.49 (12.5) Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. 6 © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.12/03/20