TVS Diodes
Surface Mount – 600W > TPSMB series
TPSMB Series
RoHS
Pb e3
Description
Uni-directional
Bi-directional
The TPSMB series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
Value
Unit
Peak Pulse Power Dissipation by 10/1000µs
waveform (Fig.1)(Note 1), (Note 2)
PPPM
600
W
Power Dissipation on infinite heat sink at
TL=50OC
PM(AV)
5.0
W
Peak Forward Surge Current, 8.3ms Single
Half Sine Wave (Note 3)
IFSM
100
A
Maximum Instantaneous Forward Voltage
at 50A for Unidirectional only (Note 4)
VF
3.5/5
V
Operating Junction Temperature Range
(VBR≤ 91V)
TJ
-65 to 175
Operating Junction Temperature Range (VBR
> 91V)
TJ
-65 to 150
TSTG
-65 to 175
RƟJL
20
°C/W
RƟJA
100
°C/W
Storage Temperature Range
Typical Thermal Resistance Junction to
Lead
Typical Thermal Resistance Junction to
Ambient
°C
• High reliability application
and automotive grade AEC
Q101 qualified
• Surface mount component
to optimize board space
• Low profile package
• Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
JESD201A per its table 4a
and 4c
• ESD protection of data
lines in accordance with
IEC 61000-4-2
30kV(Air), 30kV (Contact)
• EFT protection of data
lines in accordance with
IEC 61000-4-4
• Glass passivated chip
junction
• 600W PPPM (peak
pulse power) capability
at 10/1000μs waveform,
repetition rate (duty
cycles):0.01%
• Fast response time:
typically less than 1.0ns
from 0V to VBR min
• Excellent clamping
capability
• Low incremental surge
resistance
• Typical IR ≤ 1µA for
VR>10.2V
• UL Recognized compound
meeting flammability
rating V-0
• Meet MSL level1,
per J-STD-020, High
temperature soldering
guaranteed: 260°C/10
seconds at terminals
• Matte tin lead–free plated
• Halogen free and RoHS
compliant
• Pb-free E3 means 2nd
level interconnect is Pbfree and the terminal finish
material is tin(Sn) (IPC/
JEDEC J-STD-609A.01)
Notes:
1. Non-repetitive current pulse, per Fig.4 and derated above TA=25ºC per Fig. 3.
2. Mounted on copper pad area of 0.2x0.2” (5.0 x 5.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional component only,duty
cycle=4 per minute maximum.
4. VF < 3.5V for part number with Vbr < 300V, VF < 5.0V for part number with Vbr > =300V.
Functional Diagram
Applications
TVS components are ideal for the protection of I/O
Interfaces, VCC bus and other vulnerable circuits used in
Automotive applications.
Bi-directional
Cathode
Anode
Uni-directional
© 2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/26/19
TVS Diodes
Surface Mount – 600W > TPSMB series
Electrical Characteristics (T =25°C unless otherwise noted)
A
Part
Number
(Uni)
TPSMB7.5A
TPSMB8.2A
TPSMB9.1A
TPSMB10A
TPSMB11A
TPSMB12A
TPSMB13A
TPSMB15A
TPSMB16A
TPSMB18A
TPSMB20A
TPSMB22A
TPSMB24A
TPSMB27A
TPSMB30A
TPSMB33A
TPSMB36A
TPSMB39A
TPSMB43A
TPSMB47A
TPSMB51A
TPSMB56A
TPSMB58A
TPSMB62A
TPSMB68A
TPSMB75A
TPSMB82A
TPSMB91A
TPSMB100A
TPSMB110A
TPSMB120A
TPSMB130A
TPSMB150A
TPSMB160A
TPSMB170A
TPSMB180A
TPSMB200A
TPSMB210A
TPSMB220A
TPSMB250A
TPSMB300A-A
TPSMB350A-A
TPSMB400A-A
TPSMB440A-A
TPSMB480A-A
TPSMB510A-A
TPSMB520A-A
TPSMB530A-A
TPSMB540A-A
TPSMB550A-A
-
Part
Number
(Bi)
TPSMB10CA
TPSMB11CA
TPSMB12CA
TPSMB13CA
TPSMB15CA
TPSMB16CA
TPSMB18CA
TPSMB20CA
TPSMB22CA
TPSMB24CA
TPSMB27CA
TPSMB30CA
TPSMB33CA
TPSMB36CA
TPSMB39CA
TPSMB43CA
TPSMB47CA
TPSMB51CA
TPSMB56CA
TPSMB58CA
TPSMB62CA
TPSMB68CA
TPSMB75CA
TPSMB82CA
TPSMB91CA
TPSMB100CA
TPSMB110CA
TPSMB120CA
TPSMB130CA
TPSMB150CA
TPSMB160CA
TPSMB170CA
TPSMB180CA
TPSMB200CA
TPSMB210CA
TPSMB220CA
TPSMB250CA
TPSMB300CA-A
TPSMB350CA-A
TPSMB400CA-A
TPSMB440CA-A
TPSMB480CA-A
TPSMB510CA-A
TPSMB520CA-A
TPSMB530CA-A
TPSMB540CA-A
TPSMB550CA-A
TPSMB600CA-A
TPSMB650CA-A
Marking
UNI
BI
7V5AA
8V2AA
9V1AA
10AA
11AA
12AA
13AA
15AA
16AA
18AA
20AA
22AA
24AA
27AA
30AA
33AA
36AA
39AA
43AA
47AA
51AA
56AA
58AA
62AA
68AA
75AA
82AA
91AA
100A
110A
120A
130A
150A
160A
170A
180A
200A
210A
220A
250A
300A
350A
400A
440A
480A
510A
520A
530A
540A
550A
-
10CA
11CA
12CA
13CA
15CA
16CA
18CA
20CA
22CA
24CA
27CA
30CA
33CA
36CA
39CA
43CA
47CA
51CA
56CA
58CA
62CA
68CA
75CA
82CA
91CA
100C
110C
120C
130C
150C
160C
170C
180C
200C
210C
220C
250C
300C
350C
400C
440C
480C
510C
520C
530C
540C
550C
600C
650C
Reverse
Typical
Stand off
IR @
Voltage
150°C
VR
(μA)
(Volts)
500
200
50
20
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
6.40
7.02
7.78
8.55
9.40
10.20
11.10
12.80
13.60
15.30
17.10
18.80
20.50
23.10
25.60
28.20
30.80
33.30
36.80
40.20
43.60
47.80
52.78
53.00
58.10
64.10
70.10
77.80
85.50
94.00
102.00
111.00
128.00
136.00
145.00
154.00
171.00
179.60
185.00
214.00
256.00
300.00
342.00
376.00
408.00
434.00
443.00
451.00
460.00
468.00
511.00
553.00
Breakdown
Voltage VBR
(Volts) @ IT
Test
Current
IT
MIN
MAX
(mA)
7.13
7.79
8.65
9.50
10.50
11.40
12.40
14.30
15.20
17.10
19.00
20.90
22.80
25.70
28.50
31.40
34.20
37.10
40.90
44.70
48.50
53.20
55.10
58.90
64.60
71.30
77.90
86.50
95.00
105.00
114.00
124.00
143.00
152.00
162.00
171.00
190.00
199.50
209.00
237.00
285.00
332.00
380.00
418.00
456.00
485.00
494.50
503.50
513.00
522.50
570.00
617.50
7.88
8.61
9.55
10.50
11.60
12.60
13.70
15.80
16.80
18.90
21.00
23.10
25.20
28.40
31.50
34.70
37.80
41.00
45.20
49.40
53.60
58.80
60.90
65.10
71.40
78.80
86.10
95.50
105.00
116.00
126.00
137.00
158.00
168.00
179.00
189.00
210.00
220.50
231.00
263.00
315.00
368.00
420.00
462.00
504.00
535.00
545.50
556.50
567.00
577.50
630.00
682.50
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maximum Maximum Maximum
Maximum
Agency
Clamping
Peak
Reverse
Temperature Approval
Voltage VC
Pulse
Leakage IR
coefficient of
@ Ipp
@ VR
Current Ipp
VBR (%/C)
(µA)
(V)
(A)
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.5
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
79.8
85.0
92.0
103.0
113.0
125.0
137.0
152.0
165.0
179.0
207.0
219.0
234.0
246.0
274.0
288.0
328.0
344.0
414.0
482.0
548.0
602.0
658.0
698.0
718.0
725.0
740.0
760.0
828.0
897.0
54.0
50.4
45.5
42.1
39.1
36.5
33.5
28.8
27.1
24.2
22.0
19.9
18.4
16.3
14.7
13.3
12.2
11.3
10.3
9.4
8.7
7.9
7.7
7.2
6.6
5.9
5.4
4.9
4.5
4.0
3.7
3.4
2.9
2.8
2.6
2.5
2.2
2.1
1.9
1.8
1.5
1.3
1.1
1.0
0.9
0.9
0.9
0.8
0.8
0.8
0.8
0.8
500
200
50
10
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0.052
0.058
0.063
0.066
0.069
0.071
0.074
0.076
0.080
0.083
0.085
0.088
0.091
0.092
0.093
0.094
0.096
0.097
0.098
0.099
0.100
0.101
0.101
0.102
0.103
0.104
0.105
0.106
0.106
0.107
0.107
0.107
0.108
0.108
0.108
0.108
0.108
0.110
0.110
0.110
0.110
0.112
0.112
0.112
0.112
0.112
0.112
0.112
0.112
0.112
0.112
0.112
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-
Note:
1. For bidirectional type having VR of 10 volts and less, the IR limit is double.
2.
VBR @TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient).
3: The CTI (Comparative Tracking Index) of TPSMB600CA-A and TPSMB650CA-A is 600 and other parts is 550
© 2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/26/19
TVS Diodes
Surface Mount – 600W > TPSMB series
I-V Curve Characteristics
I
Uni-directional
I
Bi-directional
Ipp
Vc VBR VR
Vc VBR VR
V
IR VF
IT
IT
IR
IR
IT
V
Ipp
Ipp
Peak Pulse Power Dissipation -- Max power dissipation
Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation
Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT)
Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current)
Reverse Leakage Current -- Current measured at VR
Forward Voltage Drop for Uni-directional
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
Time
PPPM
VR
VBR
VC
IR
VF
VR VBR Vc
Voltage Transients
A
Voltage or Current
Voltage Across TVS
Current Through TVS
Current Through TVS
PPPM-Peak Pulse Power (KW)
Voltage or Current
Figure
2 - Across
PeakTVS
Pulse Power Rating Curve
Voltage
Voltage Transients
Voltage Across TVS
Current Through TVS
100
10
1
Time
0.31x0.31" (8.0x8.0mm)
0.1
Copper Pad Area
0.001
Voltage or Current
Voltage Transients
Figure 1 - TVS Transients Clamping Waveform
Time
0.01
0.1
1
td-Pulse Width (ms)
10
© 2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/26/19
TVS Diodes
Surface Mount – 600W > TPSMB series
Ratings and Characteristic Curves (T =25°C unless otherwise noted) (Continued)
A
Figure 3 - Peak Pulse Power Derating Curve
Figure 4 - Pulse Waveform
150
IPPM- Peak Pulse Current, % IRSM
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
100
80
VBR≤91V
60
40
VBR>91V
20
0
0
25
50
75
100
125
150
175
tr=10µsec
Half Value
IPPM IPPM
( )
2
50
TJ-Initial Junction Temperature (ºC)
IFSM - Peak Forward Surge Current (A)
Uni-directional V=0V
Cj (pF)
Uni-directional @VR
100
1
1
Bi-directional @VR
10
1.0
2.0
3.0
4.0
120
1000
Tj=25C
f=1.0MHz
Vsig=50mVp-p
td
0
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
Bi-directional V=0V
10
10/1000µsec. Waveform
as defined by R.E.A
t-Time (ms)
Figure 5 - Typical Junction Capacitance
10000
Peak Value
IPPM
100
0
200
TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of IPPM
100
VBR - Reverse Breakdown Voltage (V)
1000
100
80
60
40
20
0
1
10
100
Number of half-cycles at 60 Hz
© 2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/26/19
TVS Diodes
Surface Mount – 600W > TPSMB series
Soldering Parameters
Pre Heat
Lead–free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 120 secs
Ramp-up
TL
Average ramp up rate (Liquidus Temp (TL)
to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
60 – 150 seconds
tL
260
Time within 5°C of actual peak
Temperature (tp)
30 seconds max
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
Critical Zone
TL to TP
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
Peak Temperature (TP)
+0/-5
tp
TP
Temperature (T)
Reflow Condition
t 25˚C to Peak
Time (t)
°C
Physical Specifications
Environmental Specifications
High Temp. Storage
JESD22-A103
HTRB
JESD22-A108
Temperature Cycling
JESD22-A104
0.003 ounce, 0.093 grams
Weight
Case
JEDEC DO214AA. Molded plastic body
over glass passivated junction
MSL
JEDEC-J-STD-020, Level 1
Polarity
Color band denotes cathode for
unidirectional components.
H3TRB
JESD22-A101
Terminal
Matte Tin-plated leads, Solderable per
JESD22-B102
RSH
JESD22-A111
Dimensions
DO-214AA (SMB J-Bend)
Cathode Band for unidirectional components
C
A
B
H
D
F
E
G
Dimension in inches and (millimeters)
J
K
L
Dimensions
Inches
Millimeters
Min
Max
Min
Max
A
0.077
B
0.160
0.086
1.950
2.200
0.180
4.060
4.570
C
0.130
0.155
3.300
3.940
D
0.084
0.096
2.130
2.440
E
0.030
0.060
0.760
1.520
F
-
0.008
-
0.203
G
0.205
0.220
5.210
5.590
H
0.006
0.012
0.152
0.305
I
0.089
-
2.260
-
J
0.085
-
2.160
-
K
-
0.107
-
2.740
L
0.085
-
2.160
-
I
Solder Pads
(all dimensions in mm)
© 2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/26/19
TVS Diodes
Surface Mount – 600W > TPSMB series
Part Numbering System
Part Marking System
F
TPSMB XXX C A [-A]
DESIGN CODE
5% VBR VOLTAGE TOLERANCE
XXXX
BI-DIRECTIONAL
VBR VOLTAGE
YMXXX
SERIES
Cathode Band for
unidirectional components
Littelfuse Logo
Marking Code
Trace Code Marking
Y:Year Code
M: Month Code
XXX: Lot Code
Packaging
Component
Package
Part number
TPSMBxxxXX
DO-214AA
Packaging
Option
Quantity
3000
Tape & Reel - 12mm tape/13” reel
Packaging
Specification
EIA STD RS-481
Tape and Reel Specification
0.157
(4.0)
Cathode mark for
unidirectional components
0.47
(12.0)
0.315
(8.0)
0.059 DIA
(1.5)
Cover tape
13.0 (330)
0.80 (20.2)
Arbor Hole Dia.
0.49
(12.5)
Dimensions are in inches
(and millimeters).
Direction of Feed
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications.
Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.
© 2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/26/19
很抱歉,暂时无法提供与“TPSMB440A-A”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 1+39.51338
- 5+15.38575
- 25+8.50587
- 31+7.79778
- 72+7.39565
- 国内价格
- 1+1.40036
- 10+1.34849
- 100+1.22401
- 500+1.16178