TPSMC180CA

TVS Diodes Datasheet TPSMC Series Surface Mount - 1500W RoHS Pb e3 Description The TPSMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Uni-directional Features Bi-directional ■ Fast response time: typically less than 1.0ps from 0V to VBR min ■ For surface mounted applications to optimize board space ■ Excellent clamping capability ■ Low profile package ■ Typical IR less than 1µA above 13V ■ Low incremental surge resistance ■ Typical failure mode is short from over-specified voltage or current Agency Approvals Agency ■ High reliability application and automotive grade AEC-Q101 qualified ■ Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c Agency File Number E230531 Symbol Value Unit Peak Pulse Power Dissipation by 10/1000µs Waveform (Fig.2)(Note 1), (Note 2) PPPM 1500 W Power Dissipation on Infinite Heat Sink at TA=50OC PM(AV) 6.5 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 200 A Maximum Instantaneous Forward Voltage at 100A for Unidirectional Only VF 3.5 V Operating Junction and Storage Temperature Range ■ UL Recognized body that meets flammability rating V-0 ■ IEC 61000-4-2 ESD 30kV(Air), 30kV (Contact) ■ Meet MSL level1, per J-STD-020, high temperature ■ ESD protection of data lines in soldering guaranteed. accordance with ■ Matte tin lead–free plated IEC 61000-4-2 ■ Halogen free and RoHS ■ EFT protection of data lines in compliant accordance with ■ Pb-free E3 means 2nd level IEC 61000-4-4 interconnect is Pb-free and ■ Built-in strain relief the terminal finish material is ■ VBR @TJ= VBR@25°C x (1+αT tin(Sn) (IPC/JEDEC J-STD609A.01) x (TJ - 25)) (αT:Temperature Coefficient) ■ UL Recognized to ANSI/UL Maximum Ratings & Thermal Characteristics (TA=25°C unless otherwise noted) Parameter ■ High temperature soldering guaranteed: 260°C/10 seconds at terminals TJ , TSTG -65 to 150 ■ Glass passivated chip junction ■ 1500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% °C Typical Thermal Resistance Junction to Lead RuJL 15 °C/W Typical Thermal Resistance Junction to Ambient RuJA 75 °C/W 497B: Protectors for Data Communications and FireAlarm Circuits Applications Notes: 1. Non-repetitive current pulse per Fig. 4 and derated above TA = 25OC per Fig. 3. 2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum. TVS Components are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Functional Diagram Bi-directional Cathode Anode Uni-directional 1 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/11/21 TVS Diodes Datasheet TPSMC Series Surface Mount - 1500W Electrical Characteristics Part Number (Uni) TPSMC12A TPSMC13A TPSMC15A TPSMC16A TPSMC18A TPSMC20A TPSMC22A TPSMC24A TPSMC27A TPSMC30A TPSMC33A TPSMC36A TPSMC39A TPSMC43A TPSMC47A TPSMC51A TPSMC56A TPSMC62A TPSMC68A TPSMC75A TPSMC82A TPSMC91A TPSMC100A TPSMC110A TPSMC120A TPSMC130A TPSMC150A TPSMC160A TPSMC170A TPSMC180A TPSMC200A TPSMC220A TPSMC250A Part Number (Bi) TPSMC12CA TPSMC13CA TPSMC15CA TPSMC16CA TPSMC18CA TPSMC20CA TPSMC22CA TPSMC24CA TPSMC27CA TPSMC30CA TPSMC33CA TPSMC36CA TPSMC39CA TPSMC43CA TPSMC47CA TPSMC51CA TPSMC56CA TPSMC62CA TPSMC68CA TPSMC75CA TPSMC82CA TPSMC91CA TPSMC100CA TPSMC110CA TPSMC120CA TPSMC130CA TPSMC150CA TPSMC160CA TPSMC170CA TPSMC180CA TPSMC200CA TPSMC220CA TPSMC250CA Marking UNI BI 12AA 13AA 15AA 16AA 18AA 20AA 22AA 24AA 27AA 30AA 33AA 36AA 39AA 43AA 47AA 51AA 56AA 62AA 68AA 75AA 82AA 91AA 100AA 110AA 120AA 130AA 150AA 160AA 170AA 180AA 200AA 220AA 250AA 12CA 13CA 15CA 16CA 18CA 20CA 22CA 24CA 27CA 30CA 33CA 36CA 39CA 43CA 47CA 51CA 56CA 62CA 68CA 75CA 82CA 91CA 100CA 110CA 120CA 130CA 150CA 160CA 170CA 180CA 200CA 220CA 250CA Reverse Stand off Voltage VR (Volts) 10.20 11.10 12.80 13.60 15.30 17.10 18.80 20.50 23.10 25.60 28.20 30.80 33.30 36.80 40.20 43.60 47.80 53.00 58.10 64.10 70.10 77.80 85.50 94.50 102.60 111.15 128.25 136.80 145.35 153.90 171.00 188.10 213.75 MIN MAX (mA) Maximum Clamping Voltage VC @ Ipp (V) 11.40 12.40 14.30 15.20 17.10 19.00 20.90 22.80 25.70 28.50 31.40 34.20 37.10 40.90 44.70 48.50 53.20 58.90 64.60 71.30 77.90 86.50 95.00 104.50 114.00 123.50 142.50 152.00 161.50 171.00 190.00 209.00 237.50 12.60 13.70 15.80 16.80 18.90 21.00 23.10 25.20 28.40 31.50 34.70 37.80 41.00 45.20 49.40 53.60 58.80 65.10 71.40 78.80 86.10 95.50 105.26 115.79 126.32 136.84 157.89 168.42 178.95 189.47 210.53 231.58 263.16 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 Breakdown Voltage VBR (Volts) @ IT Test Current IT Maximum Peak Pulse Current Ipp (A) Maximum Reverse Leakage IR @ VR (µA) 91.0 83.5 71.7 67.6 60.3 54.9 49.7 45.8 40.5 36.7 33.3 30.5 28.2 25.6 23.5 21.7 19.7 17.9 16.5 14.8 13.5 12.2 11.1 10 9.2 8.5 7.3 6.9 6.5 6.2 5.5 4.6 4.4 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Agency Approval X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X For bidirectional type having VR of 10 volts and less, the IR limit is double. I-V Curve Characteristics Bi-directional Uni-directional Ipp Vc VBR VR IR V F IT Vc VBR VR V IT IR IR IT VR VBR Vc V Ipp Ipp PPPM Peak Pulse Power Dissipation -- Max power dissipation VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation VBR Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) VC Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) IR Reverse Leakage Current -- Current measured at VR VF Forward Voltage Drop for Uni-directional 2 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/11/21 TVS Diodes Datasheet TPSMC Series Surface Mount - 1500W Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Voltage Transients PPPM-Peak Pulse Power (kW) 100 Voltage or Current Voltage Across TVS Current Through TVS 10 0.31x0.31" (8.0x8.0mm) Copper Pad Area 1 0.000001 0.00001 Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform 150 100% tr=10µsec 80% IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage% 0.001 td-Pulse Width (sec.) Time TPSMC91A~TPSMC250A 60% 40% TPSMC12CA~TPSMC250CA TPSMC12A~TPSMC82A 20% Half Value IPPM IPPM ( ) 2 50 0 0 50 25 75 100 125 150 10/1000µsec. Waveform as defined by R.E.A td 1.0 0 10000 Uni-directional V=0V PM(AV), Steady Sate Power Dissipation (W) Bi-directional V=0V Uni-directional @VR 100 Bi-directional @VR TJ=25C f=1.0MHz V sig=50mVp-p 1 1 10 100 3.0 4.0 Figure 6 - Steady State Power Dissipation Derating Curve Figure 5 - Typical Junction Capacitance 10 2.0 t-Time (ms) TJ-Initial Junction Temperature(°C) 1000 TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 0% C J (pF) 0.0001 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 0 1000 25 50 75 100 125 150 175 TA - Ambient Temperature (ºC) V BR-Reverse Breakdown Voltage (V) 3 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/11/21 TVS Diodes Datasheet TPSMC Series Surface Mount - 1500W Figure 7 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only Soldering Parameters 180 IFSM - Peak Forward Surge Current (A) Lead–free assembly Reflow Condition 200 Pre Heat 160 140 - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 120 secs 120 Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max 100 TS(max) to TL - Ramp-up Rate 3°C/second max 80 Reflow 60 40 20 0 1 10 100 Number of Cycles at 60 Hz - Temperature (TL) (Liquidus) 217°C - Time (min to max) (ts) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 30 seconds max Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes max. Do not exceed 260°C Physical Specifications Terminal Matte Tin-plated leads, Solderable per JESD22-B102 Case Ramp-up TL Environmental Specifications High Temp. Storage JESD22-A103 HTRB JESD22-A108 Temperature Cycling JESD22-A104 MSL JEDEC-J-STD-020, Level 1 H3TRB JESD22-A101 RSH JESD22--A111 tp TP Temperature (T) Polarity 0.007 ounce, 0.21 grams JEDEC DO214AB. Molded plastic body over glass passivated junction Color band denotes positive end (cathode) except Bidirectional. Weight tL Critical Zone TL to TP Ts(max) Ramp-down Ts(min) ts Preheat 25˚C t 25˚C to Peak Time (t) Dimensions DO-214AB (SMC J-Bend) Dimensions Cathode Band (for Uni-directional products only) A C A B H D F E G J K L Inches Millimeters Min Max Min Max 0.114 0.126 2.900 3.200 B 0.260 0.280 6.600 7.110 C 0.220 0.245 5.590 6.220 2.620 D 0.079 0.103 2.060 E 0.030 0.060 0.760 1.520 F - 0.008 - 0.203 G 0.305 0.320 7.750 8.130 H 0.006 0.012 0.152 0.305 - I 0.129 - 3.300 J 0.094 - 2.400 - K - 0.165 - 4.200 L 0.094 - 2.400 - I Solder Pads (all dimensions in mm) 4 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/11/21 TVS Diodes Datasheet TPSMC Series Surface Mount - 1500W Part Numbering System Part Marking System TPSMC XXX C A F Cathode Band 5% Vbr Voltage Tolerance Littelfuse Logo XXXX Bi-directional YMXXX Vbr Voltage Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Series Packaging Part number Component Package Quantity Packaging Option Packaging Specification TPSMCxxxXX DO-214AB 3000 Tape & Reel - 16mm tape/13” reel EIA STD RS-481 Tape and Reel Specification 0.157 (4.0) Note: Dimensions are in inches (and millimeters). 0.47 (12.0) 0.059 DIA (1.5) 0.315 (8.0) Cover tape 13.0 (330) Cathode Mark For Unidirectional Components 0.80 (20.2) Arbor Hole Dia. Direction of Feed 0.49 (12.5) Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. 5 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/11/21