TPSMC64A-VR

TVS Diodes Datasheet TPSMC-VR Series Surface Mount – 1500W Pb e3 RoHS Description Uni-directional The TPSMC-VR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Bi-directional Features & Benefits Agency Approvals Agency Agency File Number ■ High reliability application and automotive grade AEC-Q101 qualified ■ Fast response time: typically less than 1.0ps from 0V to VBR min ■ Surface mount component to optimize board space ■ Excellent clamping capability ■ Low profile package. ■ Low incremental surge resistance ■ Typical failure mode is short from over-specified voltage or current ■ UL Recognized compound meeting flammability rating V-0. ■ Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c ■ Meet MSL level1, per J-STD-020, High temperature soldering guaranteed: 260°C/10 seconds at terminals ■ ESD protection of data lines in accordance with IEC 61000-4-2,30kV(Air), 30kV (Contact) E230531 ■ Matte tin lead–free plated ■ Halogen free and RoHS compliant ■ EFT protection of data lines in accordance with IEC 610004-4 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) ■ Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD609A.01) ■ Built-in strain relief Symbol Value Unit ■ Glass passivated chip junction Peak Pulse Power Dissipation (IPP x VC)by 10/1000µs Waveform (Fig.2) (Note 1), (Note 2) PPPM 1500 W Power Dissipation on Infinite Heat Sink at TA=50OC ■ 1500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% PM(AV) 6.5 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave IFSM 200 A Maximum Instantaneous Forward Voltage at 100A for Unidirectional Only (Note 4) VF 3.5 V TJ , TSTG -65 to 150 °C Typical Thermal Resistance Junction to Lead RθJL 15 °C/W Typical Thermal Resistance Junction to Ambient RθJA 75 °C/W Parameter Operating Junction and Storage Temperature Range Applications TVS components are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Functional Diagram Bi-directional Notes: 1. Non-repetitive current pulse per Fig. 4 and derated above TA = 25OC per Fig. 3. 2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional component only, duty cycle=4 per minute maximum. Cathode Anode Uni-directional 1 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.08/31/21 TVS Diodes Datasheet TPSMC-VR Series Surface Mount – 1500W Electrical Characteristics Part Number (Uni) TPSMC11A-VR TPSMC12A-VR TPSMC13A-VR TPSMC14A-VR TPSMC15A-VR TPSMC16A-VR TPSMC17A-VR TPSMC18A-VR TPSMC20A-VR TPSMC22A-VR TPSMC24A-VR TPSMC26A-VR TPSMC28A-VR TPSMC30A-VR TPSMC33A-VR TPSMC36A-VR TPSMC40A-VR TPSMC43A-VR TPSMC45A-VR TPSMC48A-VR TPSMC51A-VR TPSMC54A-VR TPSMC58A-VR TPSMC60A-VR TPSMC64A-VR TPSMC70A-VR TPSMC75A-VR TPSMC78A-VR TPSMC85A-VR TPSMC90A-VR TPSMC100A-VR TPSMC110A-VR TPSMC120A-VR TPSMC130A-VR TPSMC150A-VR TPSMC160A-VR TPSMC170A-VR TPSMC180A-VR TPSMC188A-VR TPSMC200A-VR Part Number (Bi) TPSMC11CA-VR TPSMC12CA-VR TPSMC13CA-VR TPSMC14CA-VR TPSMC15CA-VR TPSMC16CA-VR TPSMC17CA-VR TPSMC18CA-VR TPSMC20CA-VR TPSMC22CA-VR TPSMC24CA-VR TPSMC26CA-VR TPSMC28CA-VR TPSMC30CA-VR TPSMC33CA-VR TPSMC36CA-VR TPSMC40CA-VR TPSMC43CA-VR TPSMC45CA-VR TPSMC48CA-VR TPSMC51CA-VR TPSMC54CA-VR TPSMC58CA-VR TPSMC60CA-VR TPSMC64CA-VR TPSMC70CA-VR TPSMC75CA-VR TPSMC78CA-VR TPSMC85CA-VR TPSMC90CA-VR TPSMC100CA-VR TPSMC110CA-VR TPSMC120CA-VR TPSMC130CA-VR TPSMC150CA-VR TPSMC160CA-VR TPSMC170CA-VR TPSMC180CA-VR TPSMC188CA-VR TPSMC200CA-VR UNI BI Reverse Stand off Voltage VR (Volts) GDZA GEEA GEGA GEKA GEMA GEPA GERA GETA GEVA GEXA GEZA GFEA GFGA GFKA GFMA GFPA GFRA GFTA GFVA GFXA GFZA GGEA GGGA GGKA GGMA GGPA GGRA GGTA GGVA GHEA GHFA GHGA GHHA GHIA GHKA GHLA GHMA GHNA GHOA GHPA BDZA BEEA BEGA BEKA BEMA BEPA BERA BETA BEVA BEXA BEZA BFEA BFGA BFKA BFMA BFPA BFRA BFTA BFVA BFXA BFZA BGEA BGGA BGKA BGMA BGPA BGRA BGTA BGVA BHEA BHFA BHGA BHHA BHIA BHKA BHLA BHMA BHNA BHOA BHPA 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90 100 110 120 130 150 160 170 180 188 200 Marking Breakdown Voltage VBR (Volts) @ IT MIN MAX 12.20 13.50 13.30 14.70 14.40 15.90 15.60 17.20 16.70 18.50 17.80 19.70 18.90 20.90 20.00 22.10 22.20 24.50 24.40 26.90 26.70 29.50 28.90 31.90 31.10 34.40 33.30 36.80 36.70 40.60 40.00 44.20 44.40 49.10 47.80 52.80 50.00 55.30 53.30 58.90 56.70 62.70 60.00 66.30 64.40 71.20 66.70 73.70 71.10 78.60 77.80 86.00 83.30 92.10 86.70 95.80 94.40 104.00 100 111 111 123 122 135 133 147 144 159 167 185 178 197 189 209 201 222 209 231 224 247 Test Maximum Maximum Maximum Maximum Agency Peak Reverse Current Clamping Temperature Approval Voltage VC Pulse Leakage IR coefficient of IT @ Ipp @ VR Current Ipp VBR (%/C) (mA) (V) (µA) (A) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 145.4 159.9 175.5 191.1 206.7 240.5 256.1 271.7 288.6 300.3 321.1 82.5 75.4 69.8 64.7 61.5 57.7 54.4 51.4 46.3 42.3 38.6 35.7 33.1 31.0 28.2 25.9 23.3 21.7 20.6 19.4 18.2 17.3 16.1 15.5 14.6 13.3 12.4 11.9 11.0 10.3 9.4 8.6 7.9 7.3 6.2 5.9 5.5 5.2 5.0 4.7 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0.074 0.075 0.076 0.080 0.083 0.084 0.085 0.088 0.091 0.092 0.092 0.093 0.094 0.096 0.097 0.098 0.099 0.100 0.101 0.101 0.101 0.102 0.103 0.103 0.104 0.105 0.106 0.106 0.106 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.11 0.11 X X X X X X X X X X X X X X X X X X X X X X X X VBR @ TJ= VBR @ 25°C x (1+αT x (TJ - 25))(αT:Temperature Coefficient, typical value is 0.1%) 2 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.08/31/21 TVS Diodes Datasheet TPSMC-VR Series Surface Mount – 1500W I-V Curve Characteristics Uni-directional I I Bi-directional Ipp Vc VBR VR IR VF IT IT IR Vc VBR VR V IR IT VR VBR Vc V Ipp Ipp PPPM Peak Pulse Power Dissipation (IPP x VC)-- Max power dissipation VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation VBR Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) VC Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) IR Reverse Leakage Current -- Current measured at VR VF Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 1: TVS Transients Clamping Waveform Figure 2: Peak Pulse Power Rating Voltage Transients PPPM-Peak Pulse Power (kW) 100 Voltage or Current Voltage Across TVS Current Through TVS 10 0.31x0.31" (8.0x8.0mm) Copper Pad Area 1 0.001 0.01 Time Figure 3: Peak Pulse Power Derating Curve 150 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 1 Figure 4: Pulse Waveform 100 80 60 40 20 0 0.1 td-Pulse Width (ms) 0 25 50 75 100 125 150 TJ - Initial Junction Temperature (ºC) tr=10µsec Peak Value IPPM 100 Half Value IPPM IPPM ( ) 2 50 0 175 TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 10/1000µsec. Waveform as defined by R.E.A td 0 1.0 2.0 3.0 4.0 t-Time (ms) 3 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.08/31/21 TVS Diodes Datasheet TPSMC-VR Series Surface Mount – 1500W Figure 6 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only Figure 5 - Typical Junction Capacitance 10000 200 Bi-directional V=0V 1000 C J (pF) IFSM - Peak Forward Surge Current (A) Uni-directional V=0V Uni-directional @VR 100 Bi-directional @VR 10 TJ=25C f=1.0MHz V sig=50mVp-p 180 160 140 120 100 80 60 40 20 0 1 1 10 100 1 1000 10 V BR-Reverse Breakdown Voltage (V) 100 Number of Cycles at 60 Hz Soldering Parameters Lead–free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 120 secs Average ramp up rate (Liquidus Temp (TL) to peak TS(max) to TL - Ramp-up Rate Reflow Ramp-up TL 3°C/second max 3°C/second max - Temperature (TL) (Liquidus) 217°C - Time (min to max) (ts) 60 – 150 seconds Time within 5°C of actual peak Temperature (tp) tL Ramp-down Ts(min) ts Preheat 25˚C t 25˚C to Peak Time (t) 30 seconds max Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes max. Do not exceed 260°C Critical Zone TL to TP Ts(max) 260+0/-5 °C Peak Temperature (TP) tp TP Temperature (T) Reflow Condition Physical Specifications Environmental Specifications Weight 0.007 ounce, 0.21 grams High Temp. Storage JESD22-A103 Case JEDEC DO214AB. Molded plastic body over glass passivated junction HTRB JESD22-A108 Color band denotes cathode for unidirectional components Temperature Cycling JESD22-A104 Polarity MSL JEDEC-J-STD-020, Level 1 Terminal Matte Tin-plated leads, Solderable per JESD22-B102 H3TRB JESD22-A101 RSH JESD22-A111 4 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.08/31/21 TVS Diodes Datasheet TPSMC-VR Series Surface Mount – 1500W Dimensions DO-214AB (SMC J-Bend) Dimensions C A B H D F E G Dimensions in inches and (millimeters) L K J I Solder Pads Inches Min Millimeters Max Min Max 3.200 A 0.114 0.126 2.900 B 0.260 0.280 6.600 7.110 C 0.220 0.245 5.590 6.220 D 0.079 0.103 2.060 2.620 E 0.030 0.060 0.760 1.520 0.203 F - 0.008 - G 0.305 0.320 7.750 8.130 H 0.006 0.012 0.152 0.305 I 0.129 - 3.300 - J 0.094 - 2.400 - K - 0.165 - 4.200 L 0.094 - 2.400 - (all dimensions in mm) Part Numbering System Part Marking System TPSMC XXX C A-VR Cathode Band F (for Uni-directional products only) NAMING RULE 5% VBR VOLTAGE TOLERANCE XXX BI-DIRECTIONAL YMXXX VR VOLTAGE Littelfuse Logo Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code SERIES Packaging Part number Component Package Quantity Packaging Option Packaging Specification TPSMCxxxXX-VR DO-214AB 3000 Tape & Reel - 16mm tape/13” reel EIA STD RS-481 Tape and Reel Specification 0.157 (4.0) 0.63 (16.0) 0.315 (8.0) 0.059 DIA (1.5) Cover tape Cathode 13.0 (330) 0.80 (20.2) Arbor Hole Dia. 0.65 (16.4) Dimensions are in inches (and millimeters). Direction of Feed Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. 5 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.08/31/21