TVB058NSB-L

SiBar Thyristor Surge Protectors TVBxxxNSB-L Series Raychem Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction. These devices have a high electrical surge capability to help protect against transient faults and a high off-state impedance, rendering them virtually transparent during normal system operation. SiBar thyristor surge protectors are designed to assist telecommunication and computer telephony equipment in meeting the applicable requirements and industry specifications. Benefits: Features: • RoHS compliant • Helps provide protection for sensitive telecom electronic equipment • Bidirectional crowbar transient voltage protection • Low leakage current • Voltage range: 58V- 320V with improved Vdrm/Vbo range • Low power dissipation • High off-state impedance • Fast, reliable operation • Low on-state voltage • No wear-out mechanisms • High surge capability • Helps designers meet worldwide telecom standards • Short-circuit failure mode • Helps reduce warranty and service costs • Surface-mount technology • Easy installation • DO-214AA SMB package • Helps improve power efficiency of equipment • 10 x 1000 μs 80A surge rating • Helps equipment comply with TIA-968, Telcordia GR-1089, IEC61000-4-5, ITU K.20/21/45 Applications: • Modems • Set top boxes • Fax machines • POS systems • Phones, answering machines • Analog and digital linecards (xDSL, T1/E1...) • PBX systems • Other customer premise and central office network equipment requiring protection Document: SCD 27219 SiBar Thyristor Surge Protectors © 2007 Tyco Electronics Corporation. All rights Reserved. Status: Released 1 Rev: B Date: DECEMBER 12, 2007 SiBar Thyristor Surge Protectors TVBxxxNSB-L Series Table SB1 - Electrical Characteristics Part Number VDM Max. (V) VBO Max. (V) IH Min. (mA) VT Max. (V) C1 (Typ) 50VDC Bias C2 (Typ) 2VDC Bias TVB058NSB-L 58 77 150 4 67 129 Off-State Current VD2=VDM (μA) 5 TVB065NSB-L 65 88 150 4 64 123 5 TVB075NSB-L 75 98 150 4 63 122 5 TVB090NSB-L 90 130 150 4 49 95 5 TVB120NSB-L 120 160 150 4 38 75 5 TVB140NSB-L 140 180 150 4 36 70 5 TVB170NSB-L 170 220 150 4 29 59 5 TVB180NSB-L 180 240 150 4 29 59 5 TVB190NSB-L 190 260 150 4 28 56 5 TVB220NSB-L 220 300 150 4 26 52 5 TVB275NSB-L 275 350 150 4 23 47 5 TVB320NSB-L 320 400 150 4 22 44 5 Notes: All electrical characteristics are measured at 25°C. VDM measured per UL497B pulse requirements: at max. off-state leakage current (IDM) = 5 µA. VBO measured at 100V/µs. C1 measured at 1 MHz with a 50 VDC bias. C2 measured at 1MHz with a 2VDC bias. Table SB2 – Surge Current Rating TIA-968 Type A Part Number TVBxxxNSB-L Ipp(A) 5 x 320 µs Telcordia GR-1089* IEC61000-4-5 Ipp (A) Ipp (A) 10 x 1000 µs 2 x 10 µs Ipp (A) 8 x 20 µs ITU K.20/21/45* Type B Ipp(A) pp (A) 10 x 560 µs 10 x 160 µs 100 100 150 80 250 250 ITSM IPP (A) di/dt dV/dt 5 x 310 μs Min. (A/µs) (V/µs) (VOC: 10 x 700μs) (A) 100 30 500 2000 Notes: *Lightning current wave forms for applicable industry specification. ITSM, peak on-state surge current is measured at 60 Hz, one cycle. di/dt: critical rate-of-rise of on-state current (pulsed power amplifier Vmax = 600V; C = 30µF). dV/dt: critical rate-of-rise of off-stage voltage (linear wave form, VD = rated VBO, Tj = 25°C Document: SCD 27219 SiBar Thyristor Surge Protectors © 2007 Tyco Electronics Corporation. All rights Reserved. Status: Released 2 Rev: B Date: DECEMBER 12, 2007 SiBar Thyristor Surge Protectors TVBxxxNSB-L Series Table SB3 – Dimensions in Millimeters A Dimension TVBxxxNSB-L B TVBxxxNSB-L D* Min. Max. Min. Max. Min. Max. Min. 4.06 4.57 3.30 3.94 1.90 2.41 1.95 2.20 (0.160) (0.180) (0.130) (0.155) (0.075) (0.095) (0.077) (0.087) H Dimension C J K P Max. S Min. 0.051 Max. 0.200 Min. 0.150 Max. 0.31 Min. 0.76 Max. 1.27 Ref. 0.51 Min. 5.21 Max. 5.59 (0.002) (0.008) (0.006) (0.012) (0.030) (0.050) (0.020) (0.205) (0.220) Notes: *D dimension is measured within dimension P. TVB series devices use industry standard SMB package type. All devices are bidirectional and may be oriented in either direction for installation Table SB4 – Physical Characteristics and Environmental Specifications Lead material Matte tin finish (-L devices) Encapsulating material Epoxy, meets UL94V-0 requirements Solderability per MIL-STD-750, Method 2026 Solder heat withstand per MIL-STD-750, Method 2031 Solvent resistance per MIL-STD-750, Method 1022 Mechanical shock per MIL-STD-750, Method 2016 Vibration per MIL-STD-750, Method 2056 Storage temperature (°C) -55 to 150 Operating temperature (°C) -40 to 125 Junction temperature (°C) 175 Maximum Lead Temperature for Soldering Purpose; for 10s (°C) 260 Table SB5 – Reliability Tests Test High temperature, reverse bias Conditions +100°C, 50VDC bias Duration 1000 hours High humidity, high temperature, reserse bias 85% RH, +85°C, 50VDC bias 1000 hours High temperature storage life +150°C 1000 hours Temperature cycling -65°C to +150°C, 15 minute dwell 1000 cycles Autoclave 100% RH, +121°C, 15 PSI 96 hours Document: SCD 27219 SiBar Thyristor Surge Protectors © 2007 Tyco Electronics Corporation. All rights Reserved. Status: Released 3 Rev: B Date: DECEMBER 12, 2007 SiBar Thyristor Surge Protectors TVBxxxNSB-L Series Document: SCD 27219 SiBar Thyristor Surge Protectors © 2007 Tyco Electronics Corporation. All rights Reserved. Status: Released 4 Rev: B Date: DECEMBER 12, 2007 SiBar Thyristor Surge Protectors TVBxxxNSB-L Series Table SB6 – Packaging and Marking Information Recommended Pad Layout (millimeters/inchs) Part Description TVB058NSB-L Tape and Reel Quantity 2,500 Standard Package 10,000 Part Marking 58NB Dimension A (Nom.) 2.261 (0.089) Dimension B (Nom.) 2.159 (0.085) Dimension C (Nom.) 2.743 (0.108) Agency Recognition* UL TVB065NSB-L 2,500 10,000 65NB 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB075NSB-L 2,500 10,000 75NB 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB090NSB-L 2,500 10,000 90NB 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB120NSB-L 2,500 10,000 12NB 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB140NSB-L 2,500 10,000 14NB 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB170NSB-L 2,500 10,000 17NB 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB180NSB-L 2,500 10,000 18NB 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB190NSB-L 2,500 10,000 19NB 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB220NSB-L 2,500 10,000 22NB 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB275NSB-L 2,500 10,000 27NB 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB320NSB-L 2,500 10,000 32NB 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL *UL497B, File # E179610 308 Constitution Drive, MS R21/2A Menlo Park, CA USA 94025-1164 Tel (800) 227-7040 (650) 361-6900 Fax (650) 361-2508 www.circuitproection.com www.circuitprotection.com.hk (Chinese) www.circuitprotection.jp (Japanese) Raychem, PolySwitch, SiBar, TE Logo and Tyco Electronics are trademarks. All other trademarks and copyrights are property of their respective owners. Document: SCD 27219 SiBar Thyristor Surge Protectors © 2007 Tyco Electronics Corporation. All rights Reserved. Status: Released 5 Rev: B Date: DECEMBER 12, 2007