TVB058SA-L

PRODUCT: TVB058SA-L SiBar 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com TM DOCUMENT: SCD 25052 PCN: 539912 REV LETTER: H REV DATE:APRIL 28, 2007 PAGE NO.: 1 OF 2 Thyristor Surge Protectors Raychem Circuit Protection Products Specification Status: Released PHYSICAL DESCRIPTION Marking: 058A Date Code Device Code A B MIN MAX MIN MAX mm: 4.06 4.57 3.30 3.94 in*: (0.160) (0.180) (0.130) (0.155) C MIN 1.90 (0.075) D** H J K MAX MIN MAX MIN MAX MIN MAX MIN MAX 2.44 1.95 2.20 0.05 0.20 0.15 0.31 0.76 1.52 (0.096) (0.077) (0.086) (0.002) (0.008) (0.006) (0.012) (0.030) (0.060) P S REF MIN MAX mm: 0.51 5.21 5.59 in*: (0.020) (0.205) (0.220) *Rounded off approximation ** D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P Other Physical Characteristics Form Factor: Lead Material: Encapsulation Material: Solderability: Solder Heat Withstand: Solvent Resistance: Mechanical Shock: Vibration: SMB (Surface Mount, JEDEC DO-214AA Package) Matte Tin finish Epoxy, meets UL94 V-0 requirements per MIL-STD-750, Method 2026 per MIL-STD-750, Method 2031 per MIL-STD-750, Method 1022 per MIL-STD-750, Method 2016 per MIL-STD-750, Method 2056 Tape and Reel packaging per EIA 481-1 Agency Recognition: Precedence: CAUTION: Materials Information RoHS Compliant OBSOLETE UL This specification takes precedence over documents referenced herein. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. ELV Compliant © 2006, 2007 Tyco Electronics Corporation. All rights reserved. DEVICE RATINGS @ 25º C (Both Polarities) NOT the LATEST REVISION PRODUCT: TVB058SA-L SiBar 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com TM Thyristor Surge Protectors Raychem Circuit Protection Products Parameter Repetitive Off-State Voltage, Maximum at ID = 5 µA Non-Repetitive Peak Telcordia GR-1089 CORE 10x1000 µs Impulse Current TIA-968 lightning Type A Metallic 10/560 µs Double exponential TIA-968 lightning Type A Longit. 10/160 µs Waveform Telcordia GR-1089 Intrabuilding 2/10 µs (Notes 1 and 2) IEC61000-4-5 (Voc 1.2/50us) 8/20 µs ITU-T K.20/K.21 (Voc 10/700us) 5/310us TIA-968 lightning Type B (Voc 9/720us) 5/320 µs Critical Rate of Rise of On-State Current Power Pulse Amplifier, C=30μF, V=600V Maximum 2x10 µsec waveform, VOC=750V, ISC=150A peak DEVICE THERMAL RATINGS Storage Temperature Range Operating Temperature Range Blocking or conducting state Overload Junction Temperature Maximum; Conducting state only Maximum Lead Temperature for Soldering Purpose; for 10 seconds Symbol VDM IPP1 IPP2 IPP3 IPP4 IPP5 IPP6 IPP7 di/dt di/dt Note 2. Measured under pulse conditions to reduce heating VOLTAGE-CURRENT CHARACTERISTIC Value 58 50 70 90 150 150 80 80 Units V A A A A A A A 500 100 A/µs A/µs TSTG -55 to 150 ºC TA -40 to 125 ºC TJ +150 ºC TL +260 ºC ELECTRICAL CHARACTERISTICS Both polarities (TJ @ 25ºC unless otherwise noted) Characteristics Symbol Min Breakover Voltage (+25ºC) VBO ---(dv/dt = 0.4kV/ms, ISC=900mA, VDC = 500V (both polarities)) Breakover Voltage Temperature Coefficient dVBO/dTJ ---Off-State Current (VD1= 50V) ID1 ---(VD2=VDM) ID2=IDM ---On-State Voltage (IT=1A) VT ---PW ≤ 300 µsec, Duty Cycle ≤ 2% (Note 2) Breakover Current IBO ---Holding Current (Note 2) IH 150 Peak Onstage Surge Current ITSM 22 (Measured @ 60Hz, 1 cycle, 600V) Critical Rate of Rise of Off-State Voltage dv/dt 2000 (Linear waveform, VD = 0.8 X Rated VBO, TJ= +25ºC) Capacitance (f=1.0 Mhz, 50Vdc bias, 1Vrms) C1 ---(f=1.0 Mhz, 2Vdc bias,1Vrms) C2 ---Note 1. Allow cooling before testing second polarity DOCUMENT: SCD 25052 PCN: 539912 REV LETTER: H REV DATE:APRIL 28, 2007 PAGE NO.: 2 OF 2 Typ 64 Max 78 Units V 0.1 --------- ----2.0 5.0 %/ºC µA µA ----- 4.0 V -------- 800 ---- mA mA ---- ---- A ---- ---- V/µs 43 80 ------- pF pF