TVB275NSC-L

SiBar Thyristor Surge Protectors TVBxxxNSC-L Series Raychem Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction. These devices have a high electrical surge capability to help protect against transient faults and a high off-state impedance, rendering them virtually transparent during normal system operation. SiBar thyristor surge protectors are designed to assist telecommunication and computer telephony equipment in meeting the applicable requirements and industry specifications. Benefits: Features: • RoHS compliant • Helps provide protection for sensitive telecom electronic equipment • Bidirectional crowbar transient voltage protection • Low leakage current • Voltage range: 58V – 320V with improved Vdrm/Vbo range • Low power dissipation • High off-state impedance • Fast, reliable operation • Low on-state voltage • No wear-out mechanisms • High surge capability • Helps designers meet worldwide telecom standards • Short-circuit failure mode • Helps reduce warranty and service costs • Surface-mount technology • Easy installation • DO-214AA SMB package • Helps improve power efficiency of equipment • 10 x 1000 μs 100A surge rating • Helps equipment comply with TIA-968, Telcordia GR-1089, IEC61000-4-5, ITU K.20/21/45 Applications: • Modems • Set top boxes • Fax machines • POS systems • Phones, answering machines • Analog and digital linecards (xDSL, T1/E1...) • PBX systems • Other customer premise and central office network equipment requiring protection Document SCD: 27220 SiBar Thyristor Surge Protectors © 2008 Tyco Electronics Corporation. All rights Reserved. Status: Released 1 Rev: C Date: JANUARY 11, 2008 SiBar Thyristor Surge Protectors TVBxxxNSC-L Series Table SB1 - Electrical Characteristics TVB058NSC-L 58 77 150 4 114 222 Off-State Current VD2=VDM (μA) 5 TVB065NSC-L 65 88 150 4 103 198 5 TVB075NSC-L 75 98 150 4 90 176 5 TVB090NSC-L 90 130 150 4 79 154 5 TVB120NSC-L 120 160 150 4 72 140 5 TVB140NSC-L 140 180 150 4 66 130 5 TVB170NSC-L 170 220 150 4 48 99 5 TVB180NSC-L 180 240 150 4 48 97 5 TVB190NSC-L 190 260 150 4 44 90 5 TVB220NSC-L 220 300 150 4 41 81 5 TVB275NSC-L 275 350 150 4 38 76 5 TVB320NSC-L 320 400 150 4 35 71 5 Part Number VDM Max. (V) VBO Max. (V) IH Min. (mA) VT Max. (V) C1 (Typ) 50VDC Bias C2 (Typ) 2VDC Bias Notes: All electrical characteristics are measured at 25°C. VDM measured per UL497B pulse requirements: at max. off-state leakage current (IDM) = 5 µA. VBO measured at 100V/µs. C1 measured at 1 MHz with a 50 VDC bias. C2 measured at 1MHz with a 2VDC bias. Table SB2 – Surge Current Rating TIA-968 Type A Part Number TVBxxxNSC-L Ipp(A) 5 x 320 µs Telcordia GR-1089* IEC61000-4-5 Ipp (A) Ipp (A) 10 x 1000 µs 2 x 10 µs Ipp (A) 8 x 20 µs ITU K.20/21/45* Type B Ipp(A) pp (A) 10 x 560 µs 10 x 160 µs 150 150 200 100 500 400 ITSM IPP (A) di/dt dV/dt 5 x 310 μs Min. (A/µs) (V/µs) (VOC: 10 x 700μs) (A) 200 60 500 2000 Notes: *Lightning current wave forms for applicable industry specification. ITSM, peak on-state surge current is measured at 60 Hz, one cycle. di/dt: critical rate-of-rise of on-state current (pulsed power amplifier Vmax = 600V; C = 30µF). dV/dt: critical rate-of-rise of off-stage voltage (linear wave form, VD = rated VBO, Tj = 25°C Document SCD: 27220 SiBar Thyristor Surge Protectors © 2008 Tyco Electronics Corporation. All rights Reserved. Status: Released 2 Rev: C Date: JANUARY 11, 2008 SiBar Thyristor Surge Protectors TVBxxxNSC-L Series Table SB3 – Dimensions in Millimeters A Dimension B Min. TVBxxxNSC-L Max. TVBxxxNSC-L Max. Min. D Max. Min. Max. 4.06 4.57 3.30 3.94 1.90 2.41 1.95 2.20 (0.160) (0.180) (0.130) (0.155) (0.075) (0.095) (0.077) (0.087) H Dimension C Min. J Min. Max. K Min. Max. P Min. Max. S Ref Min Max. 0.051 0.200 0.150 0.31 0.76 1.27 0.51 5.21 5.59 (0.002) (0.008) (0.006) (0.012) (0.030) (0.050) (0.202) (0.205) (0.220) Notes: *D dimension is measured within dimension P. TVB series devices use industry standard SMB package type. All devices are bidirectional and may be oriented in either direction for installation Table SB4 – Physical Characteristics and Environmental Specifications Lead material Matte tin finish (-L devices) Encapsulating material Epoxy, meets UL94V-0 requirements Solderability per MIL-STD-750, Method 2026 Solder heat withstand per MIL-STD-750, Method 2031 Solvent resistance per MIL-STD-750, Method 1022 Mechanical shock per MIL-STD-750, Method 2016 Vibration per MIL-STD-750, Method 2056 Storage temperature (°C) -55 to 150 Operating temperature (°C) -40 to 125 Junction temperature (°C) 175 Maximum Lead Temperature for Soldering Purpose; for 10s (°C) 260 Table SB5 – Reliability Tests Test High temperature, reverse bias Conditions +100°C, 50VDC bias Duration 1000 hours High humidity, high temperature, reverse bias 85% RH, +85°C, 50VDC bias 1000 hours High temperature storage life +150°C 1000 hours Temperature cycling -65°C to +150°C, 15 minute dwell 1000 cycles Autoclave 100% RH, +121°C, 15 PSI 96 hours Document SCD: 27220 SiBar Thyristor Surge Protectors © 2008 Tyco Electronics Corporation. All rights Reserved. Status: Released 3 Rev: C Date: JANUARY 11, 2008 SiBar Thyristor Surge Protectors TVBxxxNSC-L Series Document SCD: 27220 SiBar Thyristor Surge Protectors © 2008 Tyco Electronics Corporation. All rights Reserved. Status: Released 4 Rev: C Date: JANUARY 11, 2008 SiBar Thyristor Surge Protectors TVBxxxNSC-L Series Table SB6 – Packaging and Marking Information Recommended Pad Layout (millimeters/inchs) Part Description TVB058NSC-L Tape and Reel Quantity 2,500 Standard Package 10,000 Part Marking 58NC Dimension A (Nom.) 2.261 (0.089) Dimension B (Nom.) 2.159 (0.085) Dimension C (Nom.) 2.743 (0.108) Agency Recognition* UL TVB065NSC-L 2,500 10,000 65NC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB075NSC-L 2,500 10,000 75NC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB090NSC-L 2,500 10,000 90NC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB120NSC-L 2,500 10,000 12NC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB140NSC-L 2,500 10,000 14NC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB170NSC-L 2,500 10,000 17NC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB180NSC-L 2,500 10,000 18NC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB190NSC-L 2,500 10,000 19NC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB220NSC-L 2,500 10,000 22NC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB275NSC-L 2,500 10,000 27NC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB320NSC-L 2,500 10,000 32NC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL *UL497B, File # E179610 308 Constitution Drive, MS R21/2A Menlo Park, CA USA 94025-1164 Tel (800) 227-7040 (650) 361-6900 Fax (650) 361-2508 www.circuitproection.com www.circuitprotection.com.hk (Chinese) www.circuitprotection.jp (Japanese) Raychem, PolySwitch, SiBar, TE Logo and Tyco Electronics are trademarks. All other trademarks and copyrights are property of their respective owners. Document SCD: 27220 SiBar Thyristor Surge Protectors © 2008 Tyco Electronics Corporation. All rights Reserved. Status: Released 5 Rev: C Date: JANUARY 11, 2008