TVB300SA-L

PRODUCT: TVB300SA-L SiBarTM DOCUMENT: SCD 25604 PCN: F06500 REV LETTER: C REV DATE: APRIL 28, 2007 PAGE NO.: 1 OF 2 Thyristor Surge Protectors 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com Raychem Circuit Protection Products Specification Status: Released PHYSICAL DESCRIPTION Marking: 300A Date Code Device Code Raychem Logo A B MIN MAX MIN MAX mm: 4.06 4.57 3.30 3.81 in*: (0.160) (0.180) (0.130) (0.150) C MIN 1.90 (0.075) D** H J K MAX MIN MAX MIN MAX MIN MAX MIN MAX 2.41 1.96 2.11 0.051 0.152 0.15 0.30 0.76 1.27 (0.095) (0.077) (0.083) (0.002) (0.006) (0.006) (0.012) (0.030) (0.050) P S REF MIN MAX mm: 0.51 5.21 5.59 in*: (0.020) (0.205) (0.220) *Rounded off approximation ** D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P Other Physical Characteristics Form Factor: Lead Material: Encapsulation Material: Solderability: Solder Heat Withstand: Solvent Resistance: Mechanical Shock: Vibration: SMB (Surface Mount, JEDEC DO-214AA Package) Matte Tin finish Epoxy, meets UL94 V-0 requirements per MIL-STD-750, Method 2026 per MIL-STD-750, Method 2031 per MIL-STD-750, Method 1022 per MIL-STD-750, Method 2016 per MIL-STD-750, Method 2056 Tape and Reel packaging per EIA 481-1 Agency Recognition: Precedence: CAUTION: Materials Information RoHS Compliant OBSOLETE UL This specification takes precedence over documents referenced herein. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. ELV Compliant NOT the LATEST REVISION © 2006, 2007 Tyco Electronics Corporation. All rights reserved. PRODUCT: TVB300SA-L SiBarTM 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com Thyristor Surge Protectors Raychem Circuit Protection Products DEVICE RATINGS @ 25º C (Both Polarities) Parameter Repetitive Off-State Voltage, Maximum at ID = 5 µA Non-Repetitive Peak Telcordia GR-1089 CORE 10x1000 µs Impulse Current TIA-968 lightning Type A Metallic 10/560 µs Double exponential TIA-968 lightning Type A Longit. 10/160 µs Waveform Telcordia GR-1089 Intrabuilding 2/10 µs (Notes 1 and 2) IEC61000-4-5 (Voc 1.2/50us) 8/20 µs ITU-T K.20/K.21 (Voc 10/700us) 5/310 µs TIA-968 lightning Type B (Voc 9/720us) 5/320 µs Critical Rate of Rise of On-State Current Powered Pulse Amplifier, C=30µF, V=600V Maximum 2x10 µsec waveform, VOC=750V, ISC=150A peak DEVICE THERMAL RATINGS Storage Temperature Range Operating Temperature Range Blocking or conducting state Overload Junction Temperature Maximum; Conducting state only Maximum Lead Temperature for Soldering Purpose; for 10 seconds Symbol VDM IPP1 IPP2 IPP3 IPP4 IPP5 IPP6 IPP7 di/dt di/dt VOLTAGE-CURRENT CHARACTERISTIC Value 300 50 70 100 150 150 90 90 500 110 Units V A A A A A A A A/µs A/µs TSTG -55 to 150 ºC TA -40 to 125 ºC TJ +150 ºC TL +260 ºC ELECTRICAL CHARACTERISTICS Both polarities (TJ @ 25ºC unless otherwise noted) Characteristics Symbol Min Breakover Voltage (+25ºC) VBO ---(dv/dt =0.4kV/µsec, ISC=900mA, VDC =500V (both polarites)) Breakover Voltage Temperature Coefficient dVBO/dTJ ---Off-State Current (VD1=50V) ID1 ---(VD2=VDM) ID2=IDM ---On-State Voltage (IT=1A) VT ---(PW ≤ 300 µsec, Duty Cycle ≤ 2% (Note 2)) Breakover Current IBO ---Holding Current (Note 2) IH 150 Peak Onstage Surge Current ITSM 22 (Measured @ 60Hz, 1 cycle, 600V) Critical Rate of Rise of Off-State Voltage dv/dt 2000 (Linear waveform, VD = 0.8 X Rated VBO, TJ= +25ºC) Capacitance (f=1.0 Mhz, 50VDC bias, 1Vrms) C1 ---(f=1.0 Mhz, 2VDC bias, 1Vrms) C2 ---Note 1. Allow cooling before test second polarity Note 2. Measured under pulse conditions to reduce heating DOCUMENT: SCD 25604 PCN: F06500 REV LETTER: C REV DATE: APRIL 28, 2007 PAGE NO.: 2 OF 2 Typ 350 Max 400 Units V 0.1 --------- ----2.0 5.0 %/ºC µA µA ----- 4.0 V --------- 800 ---- mA mA A ---14 27 ------- V/µs pF pF