Rockers
Product Selection Guide
Rocker
7000
E
ET
T
9000
DA
D
Miniature
Miniature
Subminiature
Subminiature
Power Rocker
& Lever Handle
Miniature
Power
Miniature
Power
Poles/Throws
SPDT, DPDT,
3PDT, 4PDT
SPDT, DPDT,
3PDT
SPST, SPDT,
DPDT
SPST, SPDT,
DPDT
DPDT
SPST, SPDT
SPST, SPDT
DPST, DPDT
Max. Current
5 Amps
7.5 Amps
3 Amps
3 Amps
10 Amps
16 Amps
10 Amps
4 Amps
10 Amps
•
•
Series
Switch Type
Washable
Illuminated
Panel Mount Options
Front Mount
Rear Mount
•
•
•
•
•
Snap-in
Snap-in
•
•
•
•
•
•
•
•
•
•
•
G–26
G–40
G–46
G–52
G–57
G–61
DM
DM
DF
CR
CG
CL
Miniature
2 Pole Power
Miniature
Illuminated
Power
Power
Round
Power
Power
Poles/Throws
DPST,
DPDT
SPST,
DPST
SPST, SPDT,
DPST
SPST,
SPDT
SPST, SPDT
SPST, SPDT
Max. Current
3 Amps,
10 Amps
3 Amps,
10 Amps
16 Amps
10 Amps,
6 Amps
10 Amps
16 Amps
10 Amps
16 Amps
•
•
•
Snap-in
Snap-in
Snap-in
G–78
G-83
G-87
PCB Mount Options
Vertical
Right Angle
Surface Mount
Page No.
•
•
•
•
•
•
•
•
G–4
Rocker
Series
Switch Type
Washable
•
Illuminated
Rocker
Panel Mount Options
Front Mount
Rear Mount
Snap-in
Snap-in
•
PCB Mount Options
Vertical
Right Angle
Surface Mount
Page No.
G
Snap-in
•
G–66
G–70
G–74
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–2
www.ckswitches.com
Rockers
Product Selection Guide
Rocker
Series
CM
CN
Power
Power
Poles/Throws
SPDT, DPDT
DPST, DPDT
Max. Current
10 Amps
16 Amps
10 Amps
16 Amps
•
•
Snap-in
Snap-in
G–91
G–95
Switch Type
Washable
Illuminated
Panel Mount Options
Front Mount
Rear Mount
PCB Mount Options
Vertical
Right Angle
Surface Mount
Page No.
Rocker
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–3
www.ckswitches.com
G
7000 Series
Miniature Rocker & Lever Handle Switches
Features/Benefits
• Multi-pole and multi-position
• Wide variety of actuator and
termination options
• Epoxy terminal-seal compatible
Typical Applications
• Telecommunications
• Instrumentation
• Medical equipment
with bottom wash cleaning
• RoHS compliant
Specifications
Materials
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC;
2 AMPS @ 250 V AC. See page G-20 for additional ratings.
ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break
cycles at full load. All other models: 40,000 cycles.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4
V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or
diallyl phthalate (DAP) (UL 94V-0).
ACTUATOR: Nylon, black.
FRAME (FRONT MOUNT): Nylon, black.
FRAME (REAR MOUNT): Spring steel, black.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass or steel, matte-tin plated.
END CONTACTS: B contact material: Copper alloy, with gold plate over
nickel plate. Q contact material: Coin silver, silver plated. See page
G-20 for additional contact materials.
CENTER CONTACTS & ALL TERMINALS: B contact material: Copper
alloy, with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See page G-20 for additional contact materials.
TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical
Data Section
HARDWARE: Mounting nuts & screws: Brass. Lockwasher: Stainless
steel. Standoff: Nylon standard.
NOTE: Any models supplied with S, P, R, Q, B or G contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
Rocker
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages G-4 through G-24 . For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
G
Switch Function
7101 SP On-None-On
7103 SP On-Off-On
7105 SP Mom.-Off-Mom.
7107 SP On-Off-Mom.
7108 SP On-None-Mom.
7109 SP None-On-Mom.
7201 DP On-None-On
7203 DP On-Off-On
7205 DP Mom.-Off-Mom.
7207 DP On-Off-Mom.
7208 DP On-None-Mom.
7211 DP On-On-On
7213 DP On-On-Mom.
7215 DP Mom.-On-Mom.
7301 3P On-None-On
7303 3P On-Off-On
7401 4P On-None-On
7405 4P Mom.-Off-Mom.
7411 4P On-On-On
Note: UL models
available, see pages G-5
and G-6.
15 Jan 21
Actuator
J1 .531 long rocker
J2 Lever
J3 .906” long rocker
J10 1.318” long rocker
J11 Rocker with frame
J15 Rocker, snap-in
J16 Rocker with frame, snap-in
J19 Rocker with frame
J21 Lever with frame
J25 Lever, snap-in
J26 Lever with frame, snap-in
J37 Rocker with frame
J50 Rocker
J51 Rocker with frame
J52 Rocker with frame for
LED, snap-in
J60 Lever
J61 Lever with frame, snap-in
J62 Lever with frame for
LED, snap-in
J90 Lever
J91 Lever with frame, snap-in
Terminations
A
Right angle, PC thru-hole
AV2 Vertical right angle, PC thru-hole
C
PC Thru-hole
Z
Solder lug
A3 Right angle, snap-in, PC thru-hole
AV3 Vertical right angle,
snap-in, PC thru-hole
AW3 Right angle, extended, PC thru-hole
V2 .555” high, V-bracket
V3 .460” high, V-bracket
V4 .630” high, V-bracket
V5 Vertical right angle, PC thru-hole
V6 .460” high, V-bracket
V7 .630” high, V-bracket
V8 .953” high, V-bracket
V9 1.150” high, V-bracket
V31 .460” high, V-bracket, snap-in
V51 Vertical right angle, snap-in
V61 .460” high, V-bracket, snap-in
W .750” long, wire wrap
W3 .425” long, wire wrap
W5 1.305” long,wire wrap
Z3 Quick connect
G–4
Contact Material
B Gold
P Gold, matte tin
Q Silver
S Silver, matte-tin
G Gold over silver
R Gold over silver, matte-tin
Seal
E Epoxy
I Epoxy potted base
Actuator Color
Frame Color
2 Black
2 Black
1 White
NONE No frame color required
3 Red
1 White
Metal Frame Color
(J11, J19, J21 &
J37 Actuators)
2 Black
1 White
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ckswitches.com
7000 Series
Miniature Rocker & Lever Handle Switches
SWITCH FUNCTION
POS. 1
NO.
POLES
SP
MODEL NO.
UL**
MODEL
NO.
SWITCH FUNCTION
POS. 2
POS. 3
CONNECTED TERMINALS
POS. 1
POS. 2
POS. 3
C&K marking on opposite side
7101
U11
ON
NONE
ON
7103
U13
ON
OFF
ON
7105
U15
MOM.
OFF
MOM.
7107
U17
ON
OFF
MOM.
7108
U18
ON
NONE
MOM.
7109
U19
NONE
ON
MOM.
C&K marking on opposite side
SCHEMATIC
N/A
2-3
OPEN
2-1
N/A
N/A
2-3
2-1
SPDT
SPDT
Terminal Nos.
For Reference Only
Part number shown: 7101J1ZQE2
DP
7201
U21
ON
NONE
ON
7203
U23
ON
OFF
ON
7205
U25
MOM.
OFF
MOM.
7207
U27
ON
OFF
MOM.
7208
U28
ON
NONE
MOM.
7211*
U211*
ON
ON
ON
7213*
U213*
ON
ON
MOM.
7215*
U215*
MOM.
ON
MOM.
N/A
OPEN
2-3,5-6
2-1,5-4
N/A
2-3,5-4
DPDT
DPDT
MOM. = Momentary
* Wiring for 3-way switch
** U11 through U413 model nos.
with all options when ordered with G, Q, R or S contact material.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–5
www.ckswitches.com
Rocker
Terminal Nos.
For Reference Only
Part number shown: 7201J1ZQE2
G
7000 Series
Miniature Rocker & Lever Handle Switches
SWITCH FUNCTION
CONNECTED TERMINALS
SWITCH FUNCTION
NO.
POLES
3P
MODEL NO.
7301
UL**
MODEL
NO.
POS. 1
POS. 2
POS. 3
POS. 1
C&K marking on opposite side
U31
ON NONE
POS. 2
POS. 3
N/A
ON
2-3,5-6,8-9
7303
SCHEMATIC
C&K marking on opposite side
2-1,5-4,8-7
OPEN
U33
ON
OFF
ON
3PDT
3PDT
Part number shown: 7301J1ZQE2
Terminal Nos.
For Reference Only
7401
U41
ON NONE
7405
U45
MOM.
OFF
7411*
U411*
ON
ON
4P
N/A
ON
MOM.
2-3,5-6,8-9,11-12
ON
2-1,5-4,8-7,11-10
OPEN
4PDT
2-3,5-4,8-9,11-10
4PDT
Rocker
Part number shown: 7401J1ZQE2
G
Terminal Nos.
For Reference Only
MOM. = Momentary
** U11 through U411 model nos.
with all options when ordered with G, Q, R or S contact material.
* Wiring for 3-way switch: See Technical Data section of this
catalog for RoHS compliant and compatible definitions and
specifications.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–6
www.ckswitches.com
7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–PANEL REAR MOUNT
J1 ROCKER
ACTUATOR
OPTION
CODE
ACTUATOR
COLOR
2
BLACK
1
WHITE
3
RED
Finish: Matte. Other colors, custom actuator markings and legends available, consult
Customer Service Center.
NOTE: Hardware: two each—mounting screws,
nuts, lockwashers and standoffs for 1/8 inch thick
panel are supplied standard on all switches with
panel mounting brackets. Actuators available
separately, see page G-21 through G-22.
Hardware is available see Technical Data section
of this catalog.
J2 LEVER
J1, J2, J3 & J10 Actuators available with
C, W-W5, Z or Z3 terminations.
PANEL MOUNTING
J1 & J2 Actuators
J3 ROCKER
DIMPLES MFG.
OPTION
J3 Actuator
J10 ROCKER
DIMPLES
MFG. OPTION
J10 Actuator
Rocker
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–7
www.ckswitches.com
G
7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–SNAP-IN FRONT MOUNT
ACTUATOR
FRAME COLOR
J15 ROCKER, SNAP-IN
OPTION
CODE
ACTUATOR
COLOR
2
BLACK
1
WHITE
3
RED
OPTION
CODE
2
No frame color choice required
FRAME COLOR
NONE
No Frame Color
(J15 or J25options)
WHITE
1
J16 ROCKER WITH FRAME, SNAP-IN
BLACK
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Actuators & frames available
separately, see pages G-21 through G-22.
J15, J16, J25, J26, J50 & J51 Actuators available with 71XX, 72XX, U1XX & U2XX models
and C, W-W5, Z and Z3 terminations.
J25 LEVER, SNAP-IN
PANEL MOUNTING
J15, J16, J25 & J26 Actuators
No frame color choice required
J26 LEVER WITH FRAME, SNAP-IN
J50 Actuator
*
Rocker
J50 ROCKER, SNAP-IN
* For J50: Increase this dimension to .620/.625
(15,75/15,88) for .091/.125 (2,31/3,18) thk. panels.
No frame color choice required
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–8
www.ckswitches.com
7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–SNAP-IN FRONT MOUNT
ACTUATOR
FRAME COLOR
J51 ROCKER WITH FRAME, SNAP-IN
OPTION
CODE
ACTUATOR
COLOR
2
BLACK
1
WHITE
3
RED
OPTION
CODE
J52 ROCKER WITH FRAME FOR LED, SNAP-IN
2
FRAME COLOR
BLACK
NONE
No Frame Color
(J15 or J25 options)
WHITE
1
Finish: Matte. Other colors, custom actuator
markings and legends available, consult Customer
Service Center.
NOTE: Actuators & frames available separately,
see pages G-21 through G-22. J51, J52, J60 & J61
Actuators available with 71XX, 72XX, U1XX & U2XX
models and C, W-W5, Z and Z3 terminations.
LED not included.
For LED information, see page G-24.
J60 LEVER, SNAP-IN
PANEL MOUNTING
J51, J60 & J61 Actuators
*
No frame color choice required
J52 Actuator
J61 LEVER WITH FRAME, SNAP-IN
*
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–9
www.ckswitches.com
Rocker
For J51, J52: Increase this dimension to .620/.625
(15,75/15,88) for .060/.125(1,52/3,18) thk. panels.
G
7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–SNAP-IN FRONT MOUNT
J62 LEVER WITH FRAME FOR LED, SNAP-IN
OPTION
CODE
2
BLACK
1
WHITE
3
RED
OPTION
CODE
FRAME COLOR
2
BLACK
NONE
No Frame Color
(J90 options)
WHITE
1
FRAME COLOR
ACTUATOR
COLOR
ACTUATOR
ACTUATOR COLOR
Finish: Matte. Other colors, custom actuator markings and legends available, consult
Customer Service Center.
LED not included.
For LED information, see page H-25.
J90 LEVER, SNAP-IN
NOTE: Actuators & frames available separately,
see pages G-21 through G-22. J62, J90 & J91
Actuators available with 71XX, 72XX, U1XX &
U2XX models and C, W-W5, Z & Z3 terminations.
PANEL MOUNTING
J62 Actuator
*
No frame color choice required.
J91 LEVER WITH FRAME, SNAP-IN
J90, J91 & J93 Actuators
Rocker
*
G
* For J90: Increase this dimension to .620/.625
(15,75/15,88) for .091/.125 (2,31/3,18) thk. panels.
For J91: Increase this dimension to .620/.625
(15,75/15,88) for .060/.125 (1,52/3,18) thk. panels.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–10
www.ckswitches.com
7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR–REAR MOUNT
ACTUATOR
FRAME COLOR
J11 ROCKER WITH FRAME
OPTION
CODE
ACTUATOR
COLOR
2
BLACK
1
WHITE
3
RED
OPTION
CODE
J19 ROCKER WITH FRAME
FRAME COLOR
2
BLACK
1
WHITE
Actuator finish: Matte. Frame finish: Gloss. Other
colors, custom actuator markings and legends
available, consult Customer Service Center.
NOTE: Actuators & frames available separately,
see pages G-21 through G-22. J11, J19, J21 &
J37 Actuators available with C, W-W5, Z & Z3
terminations. J37 offered with Black Frame (2
color option) only.
PANEL MOUNTING
J11 & J21 Actuators
J21 LEVER WITH FRAME
J19 Actuator
J37 ROCKER WITH FRAME
.313
(7,95)
J37 Actuator
Rocker
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–11
www.ckswitches.com
G
7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–PC MOUNT
ACTUATOR
J1 ROCKER
OPTION
CODE
ACTUATOR
COLOR
2
BLACK
1
WHITE
3
RED
J2 LEVER
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Some permissible actuator/termination
combinations may lack clearance between
actuator and PC board, and care must be
exercised to accommodate this condition.
Actuators available separately, see page G-21
through G-22. J1, J2 actuators available with
A, A3, AV2, AV3, AW3 & V2 terminations. J3
actuators available with AV2, AV3 & V2-V61
terminations. J50 actuators available with A
(DP, 3P models only), A3 (DP, 3P models only),
AV2, AV3, AW3 (DP, 3P models only) & V2-V61
terminations.
J3 ROCKER
Rocker
J50 ROCKER
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–12
www.ckswitches.com
7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–PC MOUNT
ACTUATOR
J60 LEVER
OPTION
CODE
ACTUATOR
COLOR
2
BLACK
1
WHITE
3
RED
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Some permissible actuator/termination
combinations may lack clearance between
actuator and PC board, and care must be
exercised to accommodate this condition.
J90 LEVER
Actuators available separately, see page G-21
through G-22. J60 & J90 actuators available
with A (DP, 3P models only), A3 (DP, 3P
models only), AV2, AV3, AW3 (DP, 3P models
only) & V2-V61
terminations.
TERMINATIONS
Z SOLDER LUG
C PC THRU-HOLE
PC MOUNTING
SPDT thru 4PDT
Not available with P, R or S contact materials.
Available actuators, see pages G-7 through G-13.
Z3 QUICK CONNECT
SPDT thru 4PDT
NOTE: Available actuators, see pages G-7 through G-13.
W, W3, W5 WIRE WRAP
OPTION
CODE
Dim 'A'
W
W3
.425 (10,80)
W5
1.305 (33,15)
.750 (19,05)
SPDT thru 4PDT
NOTE: Available actuators, see
pages G-7 through G-13.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
Rocker
SPDT thru 4PDT
Not available with P, R or S contact materials. Available
actuators, see pages G-7 through G-13. Mating quick
connector available; order part number 530100000,
page G-22.
DIM ‘A’
G–13
www.ckswitches.com
G
7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
A RIGHT ANGLE, PC THRU-HOLE
SECTION A-A
Actuator Shown In Pos. 1
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
7101J1ABE2
Horizontal Actuation
SPDT
AW3 RIGHT ANGLE, EXTENDED,
PC THRU-HOLE
PC MOUNTING
.14
(3,6)
Not available with I seal option. Available actuators, see pages G-6 and G-12.
Terminal bend radii and lead-in manufacturing option.
NOTE: PC pattern must clear switch support leg.
A RIGHT ANGLE, PC THRU-HOLE
SECTION A-A
Actuator Shown In Pos. 1
7201J1ABE2
Horizontal Actuation
DPDT
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
Rocker
PC MOUNTING
Not available with I seal option. Available actuators, see pages G-6 and G-12.
Terminal bend radii and lead-in manufacturing option.
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–14
www.ckswitches.com
7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
A RIGHT ANGLE, PC THRU-HOLE
7301J1ABE2
Horizontal Actuation
3PDT
Actuator Shown In Pos. 1
SECTION A-A
PC MOUNTING
Not available with I seal option. Available actuators, see pages G-6 and G-12.
Terminal bend radii and lead-in manufacturing option.
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150” PITCH
7101J1AV2BE2
Vertical Actuation
SPDT
Actuator Shown In Pos. 1
SECTION A-A
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150” PITCH
PC MOUNTING
Rocker
Not available with I seal option. Available actuators, see pages G-6 and G-12.
Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–15
www.ckswitches.com
G
7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150” PITCH
SECTION A-A
Actuator Shown In Pos. 1
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
7201J1AV2BE2
Vertical Actuation
DPDT
PC MOUNTING
.150” PITCH
Not available with I seal option. Available actuators, see pages G-6 and G-12.
Terminal bend radii and lead-in manufacturing option.
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150” PITCH
Actuator Shown In Pos. 1
SECTION A-A
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
7301J1AV2BE2
Vertical Actuation
3PDT
PC MOUNTING
Rocker
.150” PITCH
Not available with I seal option. Available actuators, see pages G-6 and G-12.
Terminal bend radii and lead-in manufacturing option.
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–16
www.ckswitches.com
7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150” PITCH
7401J1AV2BE2
Vertical Actuation
4PDT
Actuator Shown In Pos. 1
SECTION A-A
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150” PITCH
PC MOUNTING
Not available with I seal option. Available actuators, see pages G-6 and G-12.
Terminal bend radii and lead-in manufacturing option.
V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150” PITCH
7101J1V5BE2
Vertical Actuation
SPDT
Actuator Shown In Pos. 1
SECTION A-A
V51 VERTICAL RIGHT ANGLE, SNAP-IN,
PC MOUNTING
PC THRU-HOLE, .150” PITCH
Rocker
Not available with I seal option. Available actuators, see pages G-6 and G-12.
Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–17
www.ckswitches.com
G
7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150” PITCH
Actuator Shown In Pos. 1
SECTION A-A
7201J1V5BE2
Vertical Actuation
DPDT
V51 VERTICAL RIGHT ANGLE, SNAP-IN,
PC THRU-HOLE, .150” PITCH
PC MOUNTING
Not available with I seal option. Available actuators, see pages G-6 and G-12.
Terminal bend radii and lead-in manufacturing option.
V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
Rocker
7101J1__BE2
SPDT
Actuator Shown In Pos. 1
Actuator Shown In Pos. 1
OPTION
CODE
DIM ‘A’
V2, V21
.555 (14,10)
V6, V61
.460 (11,68)
V7
.630 (16,00)
V8
.953 (24,21)
Not available with I seal option.
Available actuators, see pages G-6 and G-12.
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–18
www.ckswitches.com
7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V21, V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
SNAP-IN
7201J1__BE2
DPDT
Actuator Shown In Pos. 1
Not available with I seal option.
Available actuators, see pages G-6 and G-12.
OPTION
CODE
DIM ‘A’
V2, V21
.555 (14,10)
V6, V61
.460 (11,68)
V7
.630 (16,00)
V8
.953 (24,21)
V2, V7, V8 VERTICAL MOUNT, V-BRACKET
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
SNAP-IN
7301J1__BE2
3PDT
Actuator Shown In Pos. 1
Not available with I seal option.
Available actuators, see pages G-6 and G-12.
OPTION
CODE
DIM ‘A’
V2, V21
.555 (14,10)
V7
.630 (16,00)
V8
.953 (24,21)
V2, V7, V8 VERTICAL MOUNT, V-BRACKET
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
7401J1__BE2
4PDT
Actuator Shown In Pos. 1
Not available with I seal option.
Available actuators, see pages G-6 and G-12.
OPTION
CODE
DIM ‘A’
V2, V21
.555 (14,10)
V7
.630 (16,00)
V8
.953 (24,21)
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–19
www.ckswitches.com
Rocker
SNAP-IN
G
7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
V3, V4, V9 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
7101J1__BE2
SPDT
SNAP-IN
Actuator Shown In Pos. 1
Not available with I seal option.
Available actuators, see pages G-6 and G-12.
OPTION
CODE
DIM ‘A’
V3, V31
.460 (11,68)
V4
.630 (16,00)
V9
1.150 (29,21)
V3, V4, V9 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
7201J1__BE2
DPDT
SNAP-IN
OPTION
CODE
DIM ‘A’
V3, V31
.460 (11,68)
Actuator Shown In Pos. 1
V4
.630 (16,00)
Not available with I seal option.
Available actuators, see pages G-6 and G-12.
V9
1.150 (29,21)
V4, V9 VERTICAL MOUNT, V-BRACKET
PC MOUNTING
Rocker
7301J1__BE2
3PDT
SNAP-IN
OPTION
CODE
SNAP-IN
Actuator Shown In Pos. 1
Actuator Shown In Pos. 1
Not available with I seal option.
Available actuators, see pages G-6 and G-12.
G
DIM ‘A’
V4
.630 (16,00)
V9
1.150 (29,21)
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–20
www.ckswitches.com
7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
V4, V9 VERTICAL MOUNT, V-BRACKET
PC MOUNTING
SNAP-IN
7401J1__BE2
4PDT
OPTION
CODE
Actuator Shown In Pos. 1
Not available with I seal option.
Available actuators, see pages G-6 and G-12.
DIM ‘A’
V4
.630 (16,00)
V9
1.150 (29,21)
CONTACT MATERIAL
OPTION
CODE
B
P
Q
S
G
R
CONTACT
MATERIAL
GOLD 1
TERMINAL
PLATING
GOLD
MATTE-TIN 6
SILVER
SILVER 4,5
GOLD OVER SILVER 2,3
1
RATINGS
LOW LEVEL/
DRY CIRCUIT
0.4 VA MAX. @ 20 V AC OR DC MAX.
5
MATTE-TIN 6
POWER
GOLD 3
LOW LEVEL/DRY
MATTE-TIN 6
CIRCUIT OR POWER
5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
0 4 VA MAX @ 20 V AC OR DC MAX OR 5 AMPS @
120 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2 END CONTACTS: Coin silver, with gold plate over nickel plate.
U11-U415 model numbers
G, Q, S & R contact material.
with all options when ordered with
3C
ENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4 END CONTACTS: Coin silver, silver plated.
Q contact material standard with C, Z & Z3 terminations.
B contact material standard with all terminations except C, Z & Z3.
P, S & R, contact materials not available with Z & Z3 terminations.
5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
6 TERMINALS: Copper alloy, with matte-tin over nickel plate.
NOTE: Any models supplied with Q, B, G S, P & R contact material are RoHS compliant.
SEAL
E EPOXY SEAL
I EPOXY POTTED BASE
'A'
DIM ‘A’
SP
.410 (10,41)
DP
.440 (11,18)
3P
.505 (12,83)
4P
.505 (12,83)
Rocker
NO.
POLES
Available with C, W through W5, Z & Z3 terminations.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–21
www.ckswitches.com
G
7000 Series
Miniature Rocker & Lever Handle Switches
AVAILABLE HARDWARE
Panel mounting hardware for rocker and lever handle switches is
available separately. Mounting hardware consists of two screws,
two nuts, two standoffs and two lockwashers per switch, and is
available for panel thicknesses of 1/16, 3/32 and 1/8 inch.
See part numbers below.
Qty
Part Number
Description
2 761103000 Standoffs
2
764100000
Mounting screws
2
764200000
Lock washers
2
764300000
Hex nuts
TYPICAL ASSEMBLY
SCREW
PANEL THICKNESS
STAND-OFF
LENGTH
STAND-OFF
LOCKWASHER
NUT
J3 actuators
J1 & J2 actuators
PART NO.
PANEL THK.
STANDOFF LENGTH
PART NO.
PANEL THK.
STANDOFF LENGTH
761103000
1/8 IN. (3,18)
.233 (5,92)
770603000
1/8 IN. (3,18)
.233 (5,92)
J10 actuators
PART NO.
PANEL THK.
STANDOFF LENGTH
770703000
1/8 IN. (3,18)
.233 (5,92)
MATERIAL
Rocker
Screws, nuts, lockwashers: Stainless steel. Standoffs: Nylon, standard.
G
J1, J11, J15 & J16 Actuators
J2, J21, J25 & J26 Actuators
J3 & J37 Actuators
PART NO.
PART NO.
PART NO.
776A01000 WHITE
776A02263 BLACK
776A03000 RED
426D01000 WHITE
426D02263 BLACK
426D03000 RED
431D01000 WHITE
431D02263 BLACK
431D03000 RED
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
J50, J51 & J52 Actuators
J60, J61 & J62 Actuators
PART NO.
PART NO.
775A01000 WHITE
775A02263 BLACK
775A03000 RED
598101000 WHITE
613802263 BLACK
598103000 RED
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–22
www.ckswitches.com
7000 Series
Miniature Rocker & Lever Handle Switches
AVAILABLE HARDWARE
J90 & J91 Actuators
J10 & J19 Actuators
PART NO.
PART NO.
598001000 WHITE
598002263 BLACK
598003000 RED
769501000 WHITE
769502263 BLACK
769503000 RED
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Frame for J11 & J21 Actuators
Frame for J16 & J26 Actuators
Frame for J51, J61 & J91 Actuators
PART NO.
PART NO.
459101000 WHITE
459102000 BLACK
459103000 RED
615601000 WHITE
615602263 BLACK
615603000 RED
Material: Spring Steel
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Frame for J19 Actuator
Frame for J37 Actuator
Frame for J52 & J62 Actuators
PART NO.
764500746 BLACK ENAMEL
764500747 WHITE ENAMEL
764601106 RETAINING SPRING
Fits Z3 Termination
female connector
PART NO.
530100000
Available in loose pieces.
Rocker
PART NO.
PART NO.
781000746 BLACK ENAMEL
781000747 WHITE ENAMEL
Material: Spring Steel
PART NO.
445400746 BLACK ENAMEL
613301000 WHITE
613302263 BLACK
613303000 RED
Material: Nylon
Finish: Matte
Material: Spring Steel
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–23
www.ckswitches.com
G
7000 Series
Miniature Rocker & Lever Handle Switches
AVAILABLE HARDWARE
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the
PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator
and frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
TYPICAL APPLICATION
J1 & J2 Actuators
.047” (1,19) PANEL THK.
.062” (1,57) PANEL THK.
.090” (2,29) PANEL THK.
.125” (3,18) PANEL THK.
PART NO.
PART NO.
PART NO.
PART NO.
452902263
452702263
452802263
452602263 BLACK
.047” (1,19) PANEL THK.
.062” (1,57) PANEL THK.
.090” (2,29) PANEL THK.
.125” (3,18) PANEL THK.
PART NO.
PART NO.
PART NO.
PART NO.
432502263
432602263
432702263
432802263 BLACK
J50, J60 & J90 Actuators
PANEL MOUNTING
For part numbers
4529xxxxx, 4527xxxxx,
4528xxxxx, 4526xxxxx
.005 R. MAX.
(0,13) TYP.
For part numbers
4325xxxxx, 4326xxxxx
.495 – .505
(12,57 – 12,83)
.595 – .605
(15,11 – 15,37)
.005 R.
(0,13)
MAX. TYP.
.495 – .505
(12,57 – 12,83)
.620 – .625
(15,75 – 15,88)
Rocker
.797 – .803
(20,24 – 20,40)
.005 R.
.495 – .505
(0,13)
(12,57 – 12,83)
MAX. TYP.
For part numbers
4327xxxxx, 4328xxxxx
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–24
www.ckswitches.com
7000 Series
Miniature Rocker & Lever Handle Switches
AVAILABLE HARDWARE
Panel Inserts
Will fit Separate Snap-in frames for
J50, J60 & J90 actuators
Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for
indicator light assembly. Order insert separately from frame. Blank insert panel (without hole
for LED) also available. LED not included.
PANEL INSERT
WITH HOLE FOR LED
BLANK PANEL INSERT
WITHOUT HOLE FOR LED
PART NO.
PART NO.
894902000
476602000 BLACK
NOTE: Special colors, custom markings available, consult Customer Service Center.
LED INFORMATION
Process Information: Soldering to LED leads must be completed within 5 seconds at
500º F (260ºC) maximum.
LEDs are not supplied with J52, J62 options. LED snaps into switch frame surrounding
actuator and is wired externally.
Flat denotes
cathode.
.230 DIA.
(5,84˘)
.200 DIA.
(5,08˘)
.025 SQ.
TYP. (0,63)
.030
(0,76)
.340
(8,64)
.750
(19,05)
Suggested LED for J52 & J62 options.
Dimensions for reference only.
Rocker
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–25
www.ckswitches.com
G
E Series
Sealed Miniature Rocker and Lever Handle Switches
Features/Benefits
• Sealed against solder and cleaning
process contaminants
• ESD Resistance—all actuator options
• Rocker, case & bushing UL 94V-0
• RoHS compliant
Typical Applications
• Telecommunications
• Instrumentation
• Computers & peripherals
Specifications
Materials
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material (E1XX & E2XX Models): 7.5 AMPS
@125 V AC or 28 V DC; 3 AMPS @ 250 V AC. (E3XX Models):
5 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC.
See page G-36 for additional ratings.
CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat
stabilized (UL 94V-0).
ACTUATOR: Nylon, black standard, internal o-ring seal standard
with all actuators.
FRAME: Spring steel, black standard.
SWITCH SUPPORT: Brass or steel, matte-tin plated.
ACTUATOR PIVOT & MOUNTING BRACKET: Nylon.
ACTUATOR PIVOT RETAINER: Stainless steel.
CONTACTS & TERMINALS: B contact material: Copper alloy, with gold
plate over nickel plate. Q contact material: Copper alloy, silver
plated. See page G-36 for additional contact materials.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut, Screw & Lockwasher: Stainless steel.
Standoff: Nylon standard, aluminum available, consult Customer
Service Center.
ELECTRICAL LIFE: E1XX and E2XX models: 40,000 make-and-break
cycles at full load. E3XX models: 30,000 cycles.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 Ω min.
ELECTROSTATIC DISCHARGE (ESD) OPTION: All actuator
options: 15,000 V DC max. @ sea level, actuator to terminals.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
NOTE: Any models supplied with Q, B, G, S, P & R contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
Rocker
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages G-26 through G-38. For additional options not shown in catalog, consult Customer Service Center. All
models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.
Switch Function
E101 SP On-None-On
E103 SP On-Off-On
E105 SP Mom.-Off-Mom.
E107 SP On-Off-Mom.
E108 SP On-None-Mom.
E201 DP On-None-On
E203 DP On-Off-On
E205 DP Mom.-Off-Mom.
E207 DP On-Off-Mom.
E208 DP On-None-Mom.
E211 DP On-On-On
E213 DP On-On-Mom.
E215 DP Mom.-On-Mom.
E301 3P On-None-On
Actuator
J1 .531 long rocker
J2 Lever
J3 .906” long rocker
J11 Rocker with frame
J21 Lever with frame
J50 .362” long rocker
J60 Lever
J90 Lever
Terminations
A
Right angle, PC thru-hole
AV2 Vertical right angle, PC thru-hole
C
PC Thru-hole
Z
Solder lug
A3 Right angle, snap-in, PC thru-hole
AV3 Vertical right angle, snap-in, PC thru-hole
V3 .460” high, V-bracket
V4 .630” high, V-bracket
V5 Vertical right angle, PC thru-hole
V6 .460” high, V-bracket
V7 .630” high, V-bracket
V8 .953” high, V-bracket
V21 .555” high, V-bracket, snap-in
V31 .460” high, V-bracket, snap-in
Contact Material
B Gold
P Gold, matte tin
Q Silver
S Silver, matte-tin
G Gold over silver
R Gold over silver, matte-tin
Seal
E Epoxy
Actuator Color
2 Black
3 Red
Frame Color
2 Black
NONE No frame color required
Metal Frame Color
(J11, J21 Actuators)
2 Black
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–26
www.ckswitches.com
E Series
Sealed Miniature Rocker and Lever Handle Switches
SWITCH FUNCTION
POS. 1
NO.
POLES
MODEL
NO.
E101
SP
SWITCH FUNCTION
POS. 2
POS. 3
C&K marking on opposite side
ON
NONE
E103
ON
OFF
ON
E105
MOM.
OFF
MOM.
E107
ON
OFF
MOM.
E108
ON
NONE
MOM.
CONNECTED TERMINALS
POS. 1
POS. 2
POS. 3
C&K marking on opposite side
ON
SCHEMATIC
N/A
2-3
OPEN
2-1
SPDT
N/A
SPDT
Terminal Nos.
For Reference Only
Part number shown: E101J1ZBE2
DP
E201
ON
NONE
ON
E203
ON
OFF
ON
E205
MOM.
OFF
MOM.
E207
ON
OFF
MOM.
E208
ON
NONE
MOM.
E211**
ON
ON
ON
E213**
ON
ON
MOM.
E215**
MOM.
ON
MOM.
N/A
OPEN
2-3,5-6
2-1,5-4
N/A
2-3,5-4
DPDT
DPDT
MOM. = Momentary
All models
** Wiring for 3-way switch, Hardware available seperately, see Technical Data section of this catalog.
with all options when ordered with G, Q, R or S contact material.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–27
www.ckswitches.com
Rocker
Terminal Nos.
For Reference Only
Part number shown: E201J1ZBE2
G
E Series
Sealed Miniature Rocker and Lever Handle Switches
SWITCH FUNCTION
POS. 1
NO.
POLES
MODEL
NO.
C&K marking on opposite side
E301
3P
SWITCH FUNCTION
POS. 2
POS. 3
ON
NONE
ON
CONNECTED TERMINALS
POS. 1
POS. 2
POS. 3
C&K marking on opposite side
2-3,5-6,8-9
N/A
SCHEMATIC
2-1,5-4,8-7
3PDT
3PDT
Terminal Nos.
For Reference Only
Part number shown: E301J1ZBE2
MOM. = Momentary
** Wiring for 3-way switch, see Technical Data section of this catalog.
All models
with all options when ordered with G, Q, R and S contact material.
ACTUATOR COLOR
ACTUATOR–PANEL REAR MOUNT
OPTION
CODE
ACTUATOR
COLOR
2
BLACK
3
RED
ACTUATOR
J1 LEVER
Finish: Matte. Other colors, custom actuator
markings and legends available, consult Customer
Service Center.
NOTE: Hardware: two each—mounting screws,
nuts, lockwashers and standoffs for 1/8 inch thick
panel are supplied standard on switches with panel
mounting bracket. Internal o-ring actuator seal
standard. Actuators available separately, see
page G-36. Hardware available seperately, see
Technical Data section of this catalog. J1, J2 actuators available with C, Z or Z3 terminations.
J2 LEVER
PANEL MOUNTING
Rocker
J1 & J2 Actuators
G
J8 Actuator
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–28
www.ckswitches.com
E Series
Sealed Miniature Rocker and Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–REAR MOUNT
ACTUATOR
FRAME COLOR
J11 ROCKER WITH FRAME
OPTION
CODE
ACTUATOR
COLOR
2
BLACK
3
RED
OPTION
CODE
FRAME COLOR
2
BLACK
NOTE: This option has reduced anti-static capability.
J21 LEVER WITH FRAME
Actuator finish: Matte, frame finish: gloss.
Other colors, custom actuator markings
and legends available, consult Customer
Service Center.
NOTE: Internal o-ring actuator seal standard.
Actuators & frames available separately, see
page G-36. Hardware available seperately,
see Technical Data section of this catalog.
J11 & J21 actuators available with C, Z & Z3
terminations.
PANEL MOUNTING
NOTE: This option has reduced anti-static capability.
ACTUATOR COLOR
ACTUATOR–PC MOUNT
ACTUATOR
J1 ROCKER
OPTION
CODE
ACTUATOR
COLOR
2
BLACK
3
RED
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
J2 LEVER
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–29
www.ckswitches.com
Rocker
NOTE: Hardware: two each—mounting
screws, nuts, lockwashers and standoffs for
1/8 inch thick panel are supplied standard on
switches with panel mounting bracket. Internal
o-ring actuator seal standard. Actuators
available separately, see page G-36. Hardware
available seperately, see Technical Data section of this catalog. J1, J2 actuators available
with A, A3, AV2, AV3, V2-V61 terminations.
G
E Series
Sealed Miniature Rocker and Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–PC MOUNT
ACTUATOR
J3 ROCKER
OPTION
CODE
ACTUATOR
COLOR
2
BLACK
3
RED
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Hardware: two each—mounting screws,
nuts, lockwashers and standoffs for 1/8 inch
thick panel are supplied standard on switches
with panel mounting bracket. Internal o-ring
actuator seal standard. Actuators available
separately, see page G-36. Hardware available
seperately, see Technical Data section of this
catalog.
J50 ROCKER
J60 LEVER
J3 actuators available with AV2, AV3
& V2-V61 terminations. Some permissible actuator/termination combinations may lack clearance
between actuator and PC board, and care must
be exercised to accommodate this condition.
J50, J60 & J90 actuators available with
A, AV2, AV3, V2 – V61 terminations.
J90 LEVER
TERMINATIONS
Z SOLDER LUG
C PC THRU-HOLE
Rocker
PC MOUNTING
SPDT thru 3PDT
G
SPDT thru 3PDT
Not available with P, S, & R contact materials.
Available actuators, see page G-27-28.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–30
www.ckswitches.com
E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
Z3 QUICK CONNECT
SPDT thru 3PDT
Not available with P, S, & R contact materials. Available
actuators, see pages G-27 thru G-28. Mating quick connector
available; order part number 530100000, page G-37.
A RIGHT ANGLE, PC THRU-HOLE
E101J1ABE2
Horizontal Actuation
SPDT
Actuator Shown In Pos. 1
SECTION A-A
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
PC MOUNTING
NOTE: Not available with J3, J50, J60 and J90 actuators.
Available actuators, see pages G-27 thru G-29.
Terminal bend radii and lead-in manufacturing option.
NOTE: PC mounting pattern must clear
switch support leg.
A RIGHT ANGLE, PC THRU-HOLE
E201J1ABE2
Horizontal Actuation
DPDT
Actuator Shown In Pos. 1
SECTION A-A
PC MOUNTING
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
Rocker
NOTE: Not available with J3 actuator.
Available actuators, see pages G-27 thru G-29.
Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–31
www.ckswitches.com
G
E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
A RIGHT ANGLE, PC THRU-HOLE
E301J1ABE2
Horizontal Actuation
3PDT
Actuator Shown In Pos. 1
SECTION A-A
PC MOUNTING
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages G-27 thru G-29.
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150” PITCH
Actuator Shown In Pos. 1
SECTION A-A
E101J1AV2BE2
Vertical Actuation
SPDT
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150” PITCH
Rocker
PC MOUNTING
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages G-27 thru G-29.
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–32
www.ckswitches.com
E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150” PITCH
E201J1AV2BE2
Vertical Actuation
DPDT
SECTION A-A
Actuator Shown In Pos. 1
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
PC MOUNTING
.150” PITCH
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages G-27 thru G-29.
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150” PITCH
E301J1AV2BE2
Vertical Actuation
3PDT
SECTION A-A
Actuator Shown In Pos. 1
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
PC MOUNTING
.150” PITCH
Rocker
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages G-27 thru G-29.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–33
www.ckswitches.com
G
E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150” PITCH
PC MOUNTING
Actuator Shown In Pos. 1
E101J1V5BE2
Vertical Actuation
SPDT
SECTION A-A
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages G-27 thru G-29.
V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150” PITCH
PC MOUNTING
SECTION A-A
Actuator Shown In Pos. 1
E201J1V5BE2
Vertical Actuation
DPDT
Rocker
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages G-27 thru G-29.
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–34
www.ckswitches.com
E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
OPTION
CODE
E101J1__BE2
SPDT
NOTE: Available actuators, see pages G-27 thru G-29.
DIM ‘A’
V21
.555 (14, 10)
V6
.460 (11, 68)
V7
.630 (16, 00)
V8
.953 (24, 21)
V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
OPTION
CODE
E201J1__BE2
DPDT
NOTE: Available actuators, see pages G-27 thru G-29.
DIM ‘A’
V21
.555 (14, 10)
V6
.460 (11, 68)
V7
.630 (16, 00)
V8
.953 (24, 21)
V7, V8 VERTICAL MOUNT, V-BRACKET
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
DIM ‘A’
V21
.555 (14, 10)
V7
.630 (16, 00)
V8
.953 (24, 21)
Rocker
OPTION
CODE
E301J1__BE2
3PDT
NOTE: Available actuators, see pages G-27 thru G-29.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–35
www.ckswitches.com
G
E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
V3, V4 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
E101J1__BE2
SPDT
OPTION
CODE
DIM ‘A’
V3, V31
.460 (11,68)
.630 (16,00)
V4
NOTE: Available actuators, see pages G-27 thru G-29.
V3, V4 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
E201J1__BE2
DPDT
OPTION
CODE
DIM ‘A’
V3, V31
.460 (11,68)
.630 (16,00)
V4
NOTE: Available actuators, see pages G-27 thru G-29.
V4 VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
Rocker
E301J1__BE2
3PDT
OPTION
CODE
V41
DIM ‘A’
.630 (16,00)
NOTE: Available actuators, see pages G-27 thru G-29.
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–36
www.ckswitches.com
E Series
Sealed Miniature Rocker and Lever Handle Switches
CONTACT MATERIAL
CONTACT
MATERIAL
OPTION
CODE
B
P
Q
S
GOLD 1
TERMINAL
PLATING
RATINGS
GOLD 1
LOW LEVEL/
MATTE-TIN 7
DRY CIRCUIT
SILVER 4,5
SILVER 5
R
E1XX & E2XX MODELS: 7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @250 V AC.
E3XX MODELS: 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
POWER
MATTE-TIN 6
G
0.4 VA MAX. @ 20 V AC OR DC MAX.
GOLD OVER
GOLD 3
LOW LEVEL/DRY
SILVER 2,3
MATTE-TIN 6
CIRCUIT OR POWER
E1XX AND E2XX MODELS: 0.4 VA MAX @20 V AC OR DC MAX. OR
7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @ 250 V AC.
DC E3XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 5 AMPS @
125 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2 END CONTACTS: Coin silver, with gold plate over nickel plate.
3C
ENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4 END CONTACTS: Coin silver, silver plated.
5 CENTER CONTACT & ALL TERMINALS: Copper alloy, with gold flash over silver
plate. Or copper alloy, silver plated.
NOTE: Any models supplied with Q, B, G, S P & R contact material are RoHS compliant.
All models
with all options when ordered with G, Q, S & R contact material.
B contact material standard with all terminations.
P R & S contact materials not available with Z terminations.
6 TERMINALS: Copper alloy, with matte-tin over nickel plate.
SEAL
E EPOXY SEAL
AVAILABLE HARDWARE
J3 Actuator
J1, J11 Actuators
PART NO.
PART NO.
PART NO.
760502263 BLACK
760503000 RED
766602263 BLACK
766603000 RED
776A02263 BLACK
776A03000 RED
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
J50 Actuator
J60 Actuator
J90 Actuator
PART NO.
PART NO.
PART NO.
775A02263 BLACK
775A03000 RED
613802263 BLACK
598103000 RED
598002263 BLACK
598003000 RED
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Rocker
J2, J21 Actuators
NOTE: Additional nuts, screws and lockwashers available separately, see Technical Data section of this catalog.
Other colors available, consult Customer Service Center.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–37
www.ckswitches.com
G
E Series
Sealed Miniature Rocker and Lever Handle Switches
AVAILABLE HARDWARE
Fits Z3 Termination
female connector
Frame for J11, J21 Actuators
J50, J60 & J90 Actuators
MATTE
GLOSS
PART NO.
PART NO.
PART NO.
486702000
486802000 BLACK
PART NO.
764500746 BLACK ENAMEL
764601106 RETAINING SPRING
530100000
Material: Spring Steel
Material: Nylon
Finish: Matte or
Gloss
Available in loose pieces.
NOTE: Additional nuts, screws and lockwashers available separately, see Technical Data section of this catalog.
Other colors available, consult Customer Service Center.
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC
mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame.
Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
TYPICAL APPLICATION
J1 & J2 Actuators
.047” (1,19) PANEL THK.
.062” (1,57) PANEL THK.
.090” (2,29) PANEL THK.
.125” (3,18) PANEL THK.
PART NO.
PART NO.
PART NO.
PART NO.
452902263
452903000
452702263
452703000
452802263
452803000
452602263 BLACK
452603000 RED
.047” (1,19) PANEL THK.
.062” (1,57) PANEL THK.
.090” (2,29) PANEL THK.
.125” (3,18) PANEL THK.
PART NO.
PART NO.
PART NO.
PART NO.
432502263
432503000
432602263
432603000
432702263
432703000
432802263 BLACK
432803000 RED
J50, J60 & J90 Actuators
Rocker
PANEL MOUNTING
For part numbers
4529xxxxx, 4527xxxxx,
4528xxxxx, 4526xxxxx
.005 R. MAX.
(0,13) TYP.
For part numbers
4325xxxxx, 4326xxxxx
.495 – .505
(12,57 – 12,83)
.797 – .803
(20,24 – 20,40)
G
.005 R.
.495 – .505
(0,13)
(12,57 – 12,83)
MAX. TYP.
.595 – .605
(15,11 – 15,37)
For part numbers
4327xxxxx, 4328xxxxx
.005 R.
(0,13)
MAX. TYP.
.495 – .505
(12,57 – 12,83)
.620 – .625
(15,75 – 15,88)
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–38
www.ckswitches.com
E Series
Sealed Miniature Rocker and Lever Handle Switches
AVAILABLE HARDWARE
Panel Inserts
Will fit separate snap-in frames for
J50, J60, J90 actuators.
Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for
indicator light assembly. Order insert separately from frame. Blank insert panel (without hole
for LED) also available. LED not included.
PANEL INSERT
WITH HOLE FOR LED
BLANK PANEL INSERT
WITHOUT HOLE FOR LED
PART NO.
PART NO.
894902000
894903000
476602000 BLACK
476603000 RED
NOTE: Special colors, custom markings available, consult Customer Service Center.
Rocker
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
G–39
www.ckswitches.com
G
ET Series
Sealed Subminiature Rocker Switches
Features/Benefits
• Sealed against solder and cleaning
process contaminants
• Rocker, bushing & case—UL 94V-0
• Small footprint—saves space
• RoHS compliant
Typical Applications
• Telecommunications
• Instrumentation
• Computers & peripherals
Specifications
Materials
CONTACT RATING: B contact material: 0.4 VA max. @
20 V AC or DC max. Q contact material: Copper alloy, silver
plated. See page G-43 for additional ratings.
ELECTRICAL LIFE: ETX1 models: 60,000 make-and-break
cycles at full load. All other models: 30,000 cycles.
CONTACT RESISTANCE: Below 20 m Ω typ. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
PACKAGING: Surface mount switches standard in tape and reel
packaging, see page G-45 for drawings and reel information.
CASE & BUSHING: Glass filled nylon 6/6, flame retardant,
heat stabilized (UL 94V-0) or glass filled 4/6 nylon, flame retardant,
heat stabilized (UL 94V-0).
ACTUATOR: Nylon, black standard. Internal o-ring seal
standard with all actuators. SA surface mount: High
temperature material, glass filled 46 nylon, flame retardant,
heat stabilized (UL 94V-0).
SWITCH SUPPORT: Brass, matte-tin plated.
CONTACTS & TERMINALS: B contact material: Copper alloy,
with gold plate over nickel plate. Q contact material: Copper alloy,
silver plated. See page G-43 for additional contact materials.
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q, B, G, S, P & Rcontact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages G-40 thru G-44. For additional options not shown in catalog, consult Customer Service Center. All models
are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.
Actuator
J1 Rocker
J6 Rocker
Terminations
A Right angle, PC thru-hole
AV Vertical Right angle, PC thru-hole
C PC Thru-hole
V3 V-bracket
AV2 Vertical Right angle, PC thru-hole
SA Right Angle Surface mount
Rocker
Switch Function
ET01 SP On-None-On
ET02 SP Off-None-On
ET03 SP On-Off-On
ET05 SP Mom.-Off-Mom.
ET07 SP On-Off-Mom.
ET08 SP On-None-Mom.
ET21 DP On-None-On
ET27 DP On-Off-Mom.
ET28 DP On-None-Mom.
G
Contact Material
B Gold
P Gold, matte tin
Q Silver
S Silver, matte-tin
G Gold over silver
R Gold over silver, matte-tin
Seal
E Epoxy
Actuator Color
2 Black
1 White
3 Red
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–40
www.ckswitches.com
ET Series
Sealed Subminiature Rocker Switches
SWITCH FUNCTION
POS. 1
NO.
POLES
SP
SWITCH FUNCTION
POS. 2
POS. 3
CONNECTED TERMINALS
POS. 1
POS. 2
POS. 3
MODEL
NO.
SCHEMATIC
ET01
ON
NONE
ON
ET03
ON
OFF
ON
ET05
MOM.
OFF
MOM.
ET07
ON
OFF
MOM.
ET08
ON
NONE
MOM.
ET02
OFF
NONE
ON
N/A
2-3
OPEN
2-1
SPDT
N/A
N/A
OPEN
3-1
SPST
SPDT
ET02 Models:
Omit terminal 2
Part number shown: ET01J6CBE2
DP
ET21
ON
NONE
ON
ET27
ON
OFF
MOM.
ET28
ON
NONE
MOM.
Terminal Nos.
For Reference Only
N/A
2-3,5-6
OPEN
N/A
2-1,5-4
DPDT
DPDT
Terminal Nos.
For Reference Only
Part number shown: ET21J6CBE2
MOM. = Momentary
All models
with all options when ordered with G, S, R or Q contact material.
Rocker
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–41
www.ckswitches.com
G
ET Series
Sealed Subminiature Rocker Switches
ACTUATOR COLOR
ACTUATOR
ACTUATOR
J1 ROCKER
PANEL MOUNTING
OPTION
CODE
ACTUATOR
COLOR
2
BLACK
1
WHITE
3
RED
Available with all models except ET0X with A & SA & SA1 terminations.
J6 ROCKER
PANEL MOUNTING
Actuators available separately, see page G-45.
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Internal o-ring actuator seal standard.
Standard with ET0X model with A & SA & SA1 terminations.
TERMINATIONS
C PC THRU-HOLE
SP
DP
SP & DP
A RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
ET01J6ABE2
Horizontal Actuation
SPDT
Not available with ET02 model.
J6 actuator std. only on ET0X models with A terminations.
A RIGHT ANGLE, PC THRU-HOLE
Rocker
PC MOUNTING
G
ET21J1ABE2
Horizontal Actuation
DPDT
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–42
www.ckswitches.com
ET Series
Sealed Subminiature Rocker Switches
TERMINATIONS
AV VERTICAL RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
ET01J1AVBE2
Vertical Actuation
SPDT
NOTE: Terminal bend radii and lead-in manufacturing option.
AV VERTICAL RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
ET21J1AVBE2
Vertical Actuation
DPDT
NOTE: Terminal bend radii and lead-in manufacturing option.
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
ET01J1AV2BE2
Vertical Actuation
SPDT
Rocker
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–43
www.ckswitches.com
G
ET Series
Sealed Subminiature Rocker Switches
TERMINATIONS
SA RIGHT ANGLE, SURFACE MOUNT
PANEL MOUNTING
ET01J6SAPE2
Horizontal Actuation
SPDT
NOTE: Standard with tape & reel packaging, see page G-44.
Available with P contact material only.
V3 VERTICAL MOUNT, V-BRACKET
PC MOUNTING
1 2 3
ET01J1V3BE2
.200
(5,08)
Actuator shown in Pos. 1
SPDT
V3 VERTICAL MOUNT, V-BRACKET
PC MOUNTING
ET21J1V3BE2
DPDT
Actuator shown in Pos. 1
CONTACT MATERIAL
OPTION
CODE
B
CONTACT
MATERIAL
GOLD 1
P
Q
Rocker
R
GOLD
1
MATTE-TIN
SILVER 4,5
S
G
TERMINAL
PLATING
RATINGS
LOW LEVEL/
6
SILVER 5
DRY CIRCUIT
POWER
MATTE-TIN 6
GOLD OVER
SILVER 2,3
GOLD 3
MATTE-TIN 6
LOW LEVEL/DRY
CIRCUIT OR POWER
0.4 VA MAX. @ 20 V AC OR DC MAX.
ETX1 MODELS: 3 AMPS @ 120 V AC
OR 28 V DC.
ALL OTHER MODELS: 2 AMPS @ 120 V AC
OR 28 V DC.
ETX1 MODELS: 0.4 VA MAX @ 20 V AC OR DC
MAX. OR 3 AMPS @120 V AC OR 28 V DC.
ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR
DC MAX. OR 2 AMPS @ 120 V AC OR 28 V DC.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
6 TERMINALS: Copper alloy, with matte-tin over nickel plate.
2 END CONTACTS: Coin silver, with gold plate over nickel plate.
NOTE: Any models supplied with Q, B, G, S, P & R contact material are RoHS compliant.
3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
All models
with all options when ordered with G, Q, S & R contact material.
4 END CONTACTS: Coin silver, silver plated.
5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–44
www.ckswitches.com
ET Series
Sealed Subminiature Rocker Switches
SEAL
E EPOXY SEAL
AVAILABLE HARDWARE
J1 Actuator
J6 Actuator
PART NO.
PART NO.
261A01000 WHITE
261A02263 BLACK
261A03000 RED
621C01000 WHITE
621C02263 BLACK
621C03000 RED
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
For Hi Temp, Consult Factory
NOT AVAILABLE WITH A, SA,
SA1
NOTE: Other colors available,
consult Customer Service Center.
TAPE & REEL SA TERMINATION
ET01J6SABE (SHOWN)
REEL INFORMATION
OUTSIDE DIAMETER
PILOT HOLE
13.00 (330,0)
.512 (13,0)
QUANTITY PER REEL
500
0.787
(20,0)
ET01J6SA1BE (SHOWN)
0.157
(4,0)
0.079
(2,0)
(1,50)
0.069
(1,75)
0.279
(7,10)
0.795
(20,2)
REEL INFORMATION
13.00 (330,0)
PILOT HOLE
.795 (20,20)
QUANTITY PER REEL
Rocker
OUTSIDE DIAMETER
1.732
(44,0)
450
FEED DIRECTION
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–45
www.ckswitches.com
G
T Series
Subminiature Rocker Switches
Features/Benefits
• Compact size—small footprint
• Single and double pole models
• PC and panel mounting options available
• RoHS compliant
Typical Applications
• Telecommunications
• Instrumentation
• Medical Equipment
Models Available
Specifications
Materials
CONTACT RATING: Q contact material (TX01 models): 3 AMPS @
120 V AC or 28 V DC. All other models: 2 AMPS @ 120 V AC or
28 V DC. See page G-49 for additional ratings.
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or
diallyl phthalate (DAP), (UL 94V-0) or glass filled nylon 4/6, flame
retardant, heat stabilized.
ELECTRICAL LIFE: TX01 models: 60,000 make-and-break
cycles at full load. All other models: 30,000 cycles.
ACTUATOR: Nylon, black standard.
CONTACT RESISTANCE: Below 20 m Ω typ. initial @
2–4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 Ω min.
HOUSING: Stainless steel.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
NOTE: Any models supplied with B, G, P, Q or R contact material are RoHS compliant.
BUSHING: Brass, nickel plated.
SWITCH SUPPORT: Brass, matte-tin plated.
MOUNTING BRACKET: Stainless steel.
END CONTACTS: B contact material: Copper alloy, with gold plate
over nickel plate. Q contact material: Coin silver, silver plated.
See page G-49 for additional contact materials.
CENTER CONTACTS & TERMINALS: B contact material: Copper alloy,
with gold plate over nickel plate. Q contact material: Copper alloy,
silver plated. See page G-49 for additional contact materials.
TERMINAL SEAL: Epoxy.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
HARDWARE: Nut, Screws & Lockwasher: Stainless steel.
Standoff: Nylon standard.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages G-46 through G-50. For additional options not shown in catalog, consult Customer Service Center.
All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Rocker
Switch Function
T101 SP On-None-On
T102 SP Off-None-On
T103 SP On-Off-On
T105 SP Mom.-Off-Mom.
T107 SP On-Off-Mom.
T201 DP On-None-On
T205 DP Mom.-Off-Mom.
G
Actuator
J1 Rocker, .300” wide
J6 Rocker, .230” wide
Terminations
A Right angle, PC thru-hole
AV Vertical Right angle, PC thru-hole
Z Solder lug
Contact Material
V3 V-bracket
B Gold
P Gold, matte-tin
Q Silver
G Gold over silver
R Gold over silver, matte-tin
Seal
E Epoxy
Actuator Color
2 Black
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–46
www.ckswitches.com
T Series
Subminiature Rocker Switches
ACTUATOR COLOR
SWITCH FUNCTION
SWITCH FUNCTION
POS. 1
NO.
POLES
SP
MODEL
NO.
POS. 2
CONNECTED TERMINALS
POS. 3
POS. 1
C&K marking on opposite side
T101
ON
NONE
ON
T103
ON
OFF
ON
T105
MOM.
OFF
MOM.
T107
ON
OFF
MOM.
T102
OFF
NONE
ON
POS. 2
POS. 3
C&K marking on opposite side
SCHEMATIC
N/A
2-3
2-1
OPEN
OPEN
N/A
SPDT
3-1
SPST
SPDT
PANEL MOUNTING
Terminal Nos.
For Reference Only
Part number shown: T101J6ZBE2
T201
ON
NONE
ON
T205
MOM.
OFF
MOM.
DP
N/A
2-3,5-6
2-1,5-4
OPEN
DPDT
DPDT
PANEL MOUNTING
Part number shown: T201J1ZBE2
Terminal Nos.
For Reference Only
MOM. = Momentary
All models
with all options when ordered with G, Q or R contact material.
Rocker
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–47
www.ckswitches.com
G
T Series
Subminiature Rocker Switches
ACTUATOR
ACTUATOR
J1 ROCKER, .300 WIDE
PANEL MOUNTING
OPTION
CODE
ACTUATOR
COLOR
2
BLACK
Actuators available separately, see page G
50. Finish: Matte. Other colors, custom actuator markings and legends available, consult
Customer Service Center.
Standard with all models except T10X with A terminations.
J6 ROCKER, .230 WIDE
PANEL MOUNTING
Standard with T10X model with A terminations.
TERMINATIONS
Z SOLDER LUG
SP
SP and DP
DP
Not available with P or R contact material.
A RIGHT ANGLE, PC THRU-HOLE
Rocker
PC MOUNTING
T101J6ABE2
Horizontal Actuation
SPDT
Not available with T102 model. J6 actuator standard only
on T10X models with A terminations.
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–48
www.ckswitches.com
T Series
Subminiature Rocker Switches
TERMINATIONS
A RIGHT ANGLE, PC THRU-HOLE
T201J1ABE2
Horizontal Actuation
DPDT
AV VERTICAL RIGHT ANGLE, PC THRU-HOLE
T101J1AVBE2
Vertical Actuation
SPDT
NOTE: Terminal bend radii and lead-in manufacturing option.
AV VERTICAL RIGHT ANGLE, PC THRU-HOLE
T201J1AVBE2
Vertical Actuation
DPDT
NOTE: Terminal bend radii and lead-in manufacturing option.
V3 VERTICAL MOUNT, V-BRACKET
Rocker
T101J1V3BE2
SPDT
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–49
www.ckswitches.com
G
T Series
Subminiature Rocker Switches
TERMINATIONS
V3 VERTICAL MOUNT, V-BRACKET
T201J1V3BE2
DPDT
CONTACT MATERIAL
OPTION
CODE
CONTACT
MATERIAL
Q
LOW LEVEL/
GOLD 3
MATTE-TIN 6
DRY CIRCUIT
SILVER 4,5
SILVER 5
POWER
GOLD OVER
SILVER 2,3
LOW LEVEL/DRY
MATTE-TIN 6
0.4 VA MAX. @ 20 V AC OR DC MAX.
TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC.
ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC.
GOLD 3
G
R
RATINGS
GOLD 1
B
P
TERMINAL
PLATING
CIRCUIT OR POWER
TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR
3 AMPS @ 120 V AC OR 28 V DC.
ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR
2 AMPS @ 120 V AC OR 28 V DC.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2 END CONTACTS: Coin silver, with gold plate over nickel plate.
3C
ENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4 END CONTACTS: Coin silver, silver plated.
5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
6 TERMINALS: Copper alloy, with matte-tin over nickel plate.
NOTE: Any models supplied with B, G, P, Q & R contact material are RoHS compliant.
All models
with all options when ordered with G, Q, or R contact material.
B contact material standard with A, AV, V3 terminations.
Q contact material standard with C & Z terminations.
P & R contact materials not available with Z terminations.
SEAL
Rocker
E EPOXY SEAL
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–50
www.ckswitches.com
T Series
Subminiature Rocker Switches
AVAILABLE HARDWARE
Panel mounting hardware for rocker and lever handle switches is
available separately. Mounting hardware consists of two screws,
two nuts, two standoffs and two lockwashers per switch, and is
available for panel thicknesses of 1/16, 3/32 and 1/8 inch.
See part numbers below.
TYPICAL ASSEMBLY
SCREW
PANEL THICKNESS
STAND-OFF
LENGTH
STAND-OFF
LOCKWASHER
NUT
PART NO.
PANEL THK.
STANDOFF LENGTH
761101000
1/16 IN. (1,59)
.295 (7,49)
761102000
3/32 IN. (2,38)
.264 (6,71)
761103000
1/8 IN. (3,18)
.233 (5,92)
NOTE: Additional nuts, screws and lockwashers available
separately, see Technical Data section of this catalog.
J1 Actuator
J6 Actuator
PART NO.
PART NO.
468002263 BLACK
468102263 BLACK
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
NOTE: Other colors, custom actuator markings and legends available,
consult Customer Service Center.
Rocker
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–51
www.ckswitches.com
G
9000 Series
Power Rocker and Lever Handle Switches
Features/Benefits
• Thermoset UL 94V-0 housing
• Rugged construction
•
Variety of actuator and
Typical Applications
• Small equipment
• Shut-off switch
termination options
• RoHS compliant
UL 61058-1
Specifications
Materials
CONTACT RATING:
CASE: Diallyl phthalate (DAP) (UL 94V-0).
9201 Model:
ACTUATOR: Nylon, black standard.
FRAME-REAR MOUNT OPTIONS: Spring steel, black.
GP (general purpose)
6 AMPS 125 VAC 50/60 Hz T85 10,000 cycles (10E3)
3 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
R (resistive)
6 AMPS 30 VDC T85 10,000 cycles
9221 Model:
GP (general purpose)
10 AMPS 125 VAC 50/60 Hz T85 10,000 cycles
5 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
R (resistive)
10 AMPS 30 VDC T85 10,000 cycles
ELECTRICAL LIFE: 25,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @
2–4 V DC, 100 mA.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 2,500 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
BUSHING: Brass, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass or steel, matte-tin plated.
MOUNTING BRACKET: Stainless steel.
END CONTACTS: 9201 Model: Coin silver, silver plated.
9221 Model: Silver cadmium oxide.
CENTER CONTACTS: Copper alloy, silver plated
ALL TERMINALS: 9201 Model: Copper alloy, silver plated.
9221 Model: Copper alloy, matte-tin plated.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut, Screw & Lockwasher: Stainless steel. Standoff:
Nylon standard, aluminum available, consult Customer
Service Center.
*Cadmium used in electrical contacts is acceptable for RoHS.
NOTE: Any models supplied with Q contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages G-52 through G-55. For additional options not shown in catalog, consult Customer Service Center.
Rocker
Switch Function
9201 DP On-On, 6 Amps
9221 DP On-On, 10 Amps
Actuator
J1 Rocker
J2 Lever
J3 Rocker
J37 Rocker with metal frame
G
Terminations
Z
Solder lug (9201 only)
AV2 Vertical right angle, PC thru-hole (9201 only)
C
PC Thru-hole (9201 only)
Z4 Quick connect
Contact Material
Q Silver
Seal
E Epoxy
D No Seal
Actuator Color
2 Black
1 White
3 Red
Frame Color
2 Black
NONE No frame color required
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–52
www.ckswitches.com
9000 Series
Power Rocker and Lever Handle Switches
SWITCH FUNCTION
SWITCH FUNCTION
POS. 1
NO.
POLES
MODEL NO.
POS. 2
CONNECTED TERMINALS
POS. 1
POS. 2
RATING*
SCHEMATIC
9201
6 AMPS
ON
ON
9221
10 AMPS
ON
ON
DP
2-3,5-6
2-1,5-4
DPDT
DPDT
.140 DIA.(3,56 ø)
w/ J10 actuator
1.875
(47,62)
w/ J10
actuator
Part number shown: 9201J1ZQE2
1.625
(41,28)
w/ J10
actuator
Terminal Nos.
Molded On Side Of Case
All 9000 Series models meet international dimensional and electrical requirements.
* See CONTACT MATERIAL, page G-54, for complete ratings.
9221 model must be ordered with Z4 terminations and D seal option.
ACTUATOR COLOR
ACTUATOR–PANEL MOUNT
OPTION
CODE
ACTUATOR
COLOR
2
BLACK
1
WHITE
3
RED
ACTUATOR
J1 ROCKER
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Hardware: two each—mounting screws, nuts,
lockwashers and standoffs for 1/8 inch
thick panel are supplied standard on all switches with
panel mounting brackets. Actuators available separately, see page G-55. Hardware available separately, see
Technical Data section of this catalog.
J2 LEVER
PANEL MOUNTING
Rocker
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–53
www.ckswitches.com
G
9000 Series
Power Rocker and Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–PANEL MOUNT
ACTUATOR
J3 ROCKER
OPTION
CODE
ACTUATOR
COLOR
2
BLACK
1
WHITE
3
RED
Actuator finish: Matte. Other colors, custom
actuator markings and legends available,
consult Customer Service Center.
PANEL MOUNTING
NOTE: Actuators available separately, see
page G–55. Hardware: two each—mounting
screws, nuts, lockwashers and standoffs for
1/8 inch thick panel are supplied standard on
all switches with panel mounting brackets.
Hardware available separately, see Technical
Data section of this catalog.
ACTUATOR COLOR
ACTUATOR–REAR MOUNT
ACTUATOR
FRAME COLOR
J37 ROCKER WITH METAL FRAME
OPTION
CODE
.313
(7,95)
ACTUATOR
COLOR
2
BLACK
1
WHITE
3
RED
OPTION
CODE
2
FRAME COLOR
BLACK
Actuator finish: Matte. Frame finish: Gloss.
Other colors, custom actuator markings
and legends available, consult Customer
Service Center.
NOTE: Actuators & frames available separately,
see page G-55. Hardware: two each—mounting
screws, nuts, lockwashers and standoffs for 1/8
inch thick panel are supplied standard on all
switches with panel mounting brackets. Hardware
available separately, see Technical Data section
of this catalog.
PANEL
MOUNTING
Not available with AV2 termination.
TERMINATIONS
Z SOLDER LUG
C PC THRU-HOLE
Z4 QUICK CONNECT
Rocker
PC MOUNTING
9201 and 9221
NOTE: Only termination available with 9221 model. Must be ordered with
D seal option. Mating terminal standard Nema .187” quick connect.
9201 Only
G
9201 Only
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–54
www.ckswitches.com
9000 Series
Power Rocker and Lever Handle Switches
TERMINATIONS
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE
9201J1AV2QE2
Vertical Actuation
DPDT
Terminal Nos. Molded
On Side of Case
9201 Only
NOTE: Terminal bend radii and lead-in manufacturing option.
Terminal spacing greater than 3mm at all points.
CONTACT MATERIAL
OPTION
CODE
Q
MODEL
CONTACT MATERIAL
TERMINAL
PLATING
RATINGS
9201
SILVER 1,2
SILVER OR TIN 2,5
9221
SILVER CADMIUM OXIDE 3,4,6
TIN 5
GP (general purpose) 6 AMPS 125 VAC 50/60 Hz T85 10,000 cycles (10E3)
3 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
R (resistive) 6 AMPS 30 VDC T85 10,000 cycles
GP (general purpose) 10 AMPS 125 VAC 50/60 Hz T85 10,000 cycles
5 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
R (resistive) 10 AMPS 30 VDC T85 10,000 cycles
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 END CONTACTS: Coin silver, silver plated.
2 CENTER CONTACTS & ALL TERMINALS: Copper alloy, silver plated.
3 END CONTACTS: Silver cadmium oxide.
4 CENTER CONTACTS: Copper alloy, silver plated.
5 Z4 TERMINALS ONLY: Copper alloy, tin plated.
NOTE: Any models supplied with Q contact material is RoHS compliant.
9221 model must be ordered with Z4 terminations and D seal option.
All 9000 Series models meet international dimensional and electrical requirements.
6 Cadmium used for electrical contacts is acceptable for RoHS.
SEAL
D NO EPOXY SEAL
Not available with 9221 model or Z4 terminations.
Must be ordered with 9221 model and Z4 termination.
Rocker
E EPOXY SEAL
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–55
www.ckswitches.com
G
9000 Series
Power Rocker and Lever Handle Switches
AVAILABLE HARDWARE
Panel mounting hardware for rocker and lever handle switches is
available separately. Mounting hardware consists of two screws,
two nuts, two standoffs and two lockwashers per switch, and is
available for panel thicknesses of 1/16, 3/32 and 1/8 inch.
See part numbers below.
TYPICAL ASSEMBLY
SCREW
PANEL THICKNESS
STAND-OFF
LENGTH
STAND-OFF
LOCKWASHER
NUT
J1 & J2 actuators
PART NO.
PANEL THK.
STANDOFF LENGTH
761101000
1/16 IN. (1,59)
.295 (7,49)
761102000
3/32 IN. (2,38)
.264 (6,71)
761103000
1/8 IN. (3,18)
.233 (5,92)
J1 Actuator
J2 Actuator
J3, J37 Actuators
PART NO.
PART NO.
PART NO.
776A01000 WHITE
776A02263 BLACK
776A03000 RED
760501000 WHITE
760502263 BLACK
760503000 RED
766601000 WHITE
766602263 BLACK
766603000 RED
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Frame for J37 Actuators
NOTE: Additional nuts, screws and lockwashers available separately,
see Technical Data section of this catalog.
Other colors available, consult Customer Service Center.
PART NO.
445400746 BLACK ENAMEL
Rocker
Material: Spring Steel
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–56
www.ckswitches.com
DA Series
Miniature Single Pole Rocker Switches
Typical Applications
• Small appliances
• Computers and peripherals
• Medical instrumentation
Features/Benefits
• Nice actuator styling with
multiple options
• Guards to prevent accidental
actuation
• Momentary and maintained functions
• IP54 splash proof rubber boot option
• RoHS compliant
UL 61058-1
Specifications
Materials
CONTACT RATING:
16 AMPS @ 125 VAC, 1/3 HP;
10 AMPS @ 250 VAC, 1/2 HP.
10 AMPS @ 125 VAC, 6 AMPS @ 250 VAC.
ELECTRICAL LIFE: 10,000 make and break cycles at full load.
INSULATION RESISTANCE: 108 Ω min.
HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, matte finish.
ILLUMINATED ACTUATOR: Polycarbonate, matte finish.
CENTER CONTACTS: Silver plated, copper alloy.
END CONTACTS: Silver plated.
ALL TERMINALS: Silver plated, copper alloy.
DIELECTRIC STRENGTH: 1,500 VRMS @ sea level.
OPERATING TEMPERATURE: -20ºC to +85ºC
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages G-57 through G-60. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
DA101 SPDT On-None-On
DA102 SPST On-None-Off
DA103 SPDT On-Off-On
* Actuator “J3” illuminated switches are
not available with actuator markings
** Actuator “J3”, “J4” and “J5” are not
available with Termination option “17”
solder lug
Actuator
J1
Rocker
J2
Two-tone rocker
*, **J3 Illuminated rocker
** J4 Circle, illuminated rocker
** J5 Oval, illuminated rocker
Actuator Color
1-5 See Chart on Page G-59
*R Red, illuminated
*A Amber, illuminated
*G Green, illuminated
Contact Rating
QF Silver
Rocker
Mounting Style/Color
S2 Snap-in, black
S1 Snap-in, white
B2 Recessed snap-in bracket, black
G2 Guard, black
Termination
15 .187” quick connect
17 Solder lug
02 Thru-hole
A Right angle Actuator Marking
(NONE) No marking
D ON-OFF
H ”O l” - international ON-OFF
N Large dot
P ”O -” international ON-OFF
Lamp Rating
(NONE) No lamp
6 LED
7 125 VAC neon
8 250 VAC neon
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 May 20
G–57
www.ckswitches.com
G
DA Series
Miniature Single Pole Rocker Switches
SWITCH FUNCTION
CONNECTED TERMINALS
SWITCH FUNCTION
NO.
POLES
SP
C&K marking on opposite side
C&K marking on opposite side
MODEL NO.
DA101
ON
NONE
ON
DA102
ON
NONE
OFF
2-3
SCHEMATIC
OR
OR
2-1
N/A
For 7 & 8
For Illuminated
Illuminated Versions
Version
Only
+
DA103
ON
OFF
–
For 6 Illuminated
Versions Only
ON
Shown in Pos. 1
ACTUATOR
J1 ROCKER
*J3 ILLUMINATED ROCKER
J2
TWO-TONE ROCKER
Rocker
.142
(3,6)
G
NOTE: J3 actuator available with DA102 switch functions, 7&8 lamp ratings and not
available with O2 and A termination options.
* J3 actuator not available with markings or Termination option “17” solder lug
.389
(9,88)
NOTE:
1. Available with DA102 switch function only.
2. Available with None or P actuator marking options only.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 May 20
G–58
www.ckswitches.com
DA Series
Miniature Single Pole Rocker Switches
ACTUATOR
J4
J5
CIRCLE, ILLUMINATED ROCKER
OVAL, ILLUMINATED ROCKER
.389
(9,88)
.142
(3,6)
.389
(9,88)
.142
(3,6)
NOTE: Available with DA102 switch function and
6 lamp rating combinations only. Not available with O2 and A termination options.
* J5 actuator not available with Termination option “17” solder lug
NOTE: Available with DA102 switch function and
7 & 8 lamp ratings combinations only. Not available with O2 and A termination options.
* J4 actuator not available with Termination option “17” solder lug
ACTUATOR COLOR
OPTION
CODE
J1 only
J3, J4, J5 only
OPTION ACTUATOR
CODE COLOR
TOP BOTTOM
ACTUATOR COLOR
2
BLACK
1
WHITE
3
RED
R
RED, ILLUMINATED
A
AMBER, ILLUMINATED
G
GREEN, ILLUMINATED
J2
only
1
2
WHITE RED
WHITE BLACK
3
4
5
.142
(3,6)
RED WHITE
.389
(9,88)
BLACK WHTE
BLACK RED
MOUNTING STYLE/COLOR
S2
S1
G2
SNAP-IN, BLACK
GUARD, BLACK
SNAP-IN, WHITE
S2, S1 & G2 PANEL MOUNTING
.350
(8,89)
.940
(23,88)
.700
(17,78)
1.064
(27,03)
“X”
“Y”
0.030-0.049 (0,75-1,25)
PANEL THICKNESS
0.756-.004 (19,2-0,1)
0.512+.004 (13,0+0,1)
0.049-0.079 (1,25-2,0)
0.764-.004 (19,4-0,1)
0.512+.004 (13,0+0,1)
0.779-.004 (19,8-0,1)
0.512+.004 (13,0+0,1)
0.079-0.118 (2,0-3,0)
NOTE: Available with DA10X switch functions only.
Actuator shown in Pos. 1
B2
B2 PANEL MOUNTING
RECESSED SNAP-IN BRACKET, BLACK
.080
(2,03)
1.200
(30,48)
.820
(20,83)
Rocker
1.244
(31,60)
NOTE: Available with DA10X switch functions only.
PANEL THICKNESS
“Y”
0.030-0.049 (0,75-0,25)
1.068 (27,13)
0.049-0.079 (1,25-2,0)
1.076 (27,33)
1.092 (27,74)
0.079-0.118 (2,0-3,0)
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 May 20
G–59
www.ckswitches.com
G
DA Series
Miniature Single Pole Rocker Switches
TERMINATION
15
17
.187” QUICK CONNECT
SOLDER LUG
0.870±.020
(22,10±0,5)
0.079
(2,0)
0.071
(1,8)
0.039
(1,00)
0.161
(4,1)
For switches with LED option
02*
A*
THRU-HOLE
RIGHT ANGLE
* NOTE - O2 and A termination options not offered with J3, J4 or J5 actuator options.
ACTUATOR MARKING
NONE
D
NO MARKING
ON-OFF
H
N
Ol
LARGE DOT
P
O-
All models shown in Pos. 1
NOTE: Orientation of actuator marking and terminals.
Markings not available with J3 actuator
CONTACT MATERIAL
OPTION
CODE
CONTACT AND
TERMINAL MATERIAL
QF
SILVER
RATINGS
16 AMPS @ 125 VAC; 1/3 HP; 10 AMPS @ 250 VAC; 1/2
POWER
10 AMPS @ 125 VAC, 6 AMPS @ 250 VAC
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
ACCESSORIES
Rocker
LAMP RATING
(NONE) NO LAMP
6 LED RATING @ 10 mA Vf=1.85V
7 125 VAC 33kΩ NEON
8 250 VAC 150kΩ NEON
216C00000
.748
(19,0)
IP54 SPLASH PROOF RUBBER BOOT
.551
(14,0)
.787
(20,0)
.957
(24,3)
G
.142
(3,6)
.295
(7,5)
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 May 20
G–60
www.ckswitches.com
D Series
Miniature Snap-in Power Rocker Switches
Features/Benefits
• Momentary and maintained models
• PC and quick connect terminals
• Recessed bracket available — prevents
accidental actuation
Typical Applications
• Small appliances
• Computers and peripherals
• Medical instrumentation
• RoHS compliant
• Gold plated options available
UL 61058-1
Specifications
Materials
CONTACT RATING:
D101, D102, D103, D105, D108, D201, D202, D203
ACTUATOR & HOUSING: 6/6 nylon (UL 94V-2), color black,
finish: matte.
GP (general purpose)
4 AMPS 125 VAC 50/60 Hz T85 10,000 cycles
MOVABLE CONTACTS: D10X and D20X Models: Copper, silver plated.
D50X and D60X Models: Coin silver, silver plated.
STATIONARY CONTACTS AND TERMINALS: Copper or brass,
silver plated. Gold plating available.
2 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
R (resistive)
4 AMPS 30 VDC T85 10,000 cycles
D501, D502, D503, D508, D601, D602, D608
GP (general purpose)
10 AMPS 125 VAC 50/60 Hz T85 10,000 cycles
5 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
R (resistive)
10 AMPS 30 VDC T85 10,000 cycles
0.4VA @ 20V AC/DC (gold plating) available upon request
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
INSULATION RESISTANCE: 109 Ω min.
CONTACT SPRING: Music wire or stainless steel.
OPERATING TEMPERATURE: -30ºC to +65ºC
NOTE: Specifications and materials listed above are for standard switches.
For information on specific and custom switches, consult Customer Service Center.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages G–61 through G–65. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
D101 SPDT, On-None-On
D102 SPST, On-None-Off
D103 SPDT, On-Off-On
D105 SPDT, Mom.-Off-Mom.
D108 SPDT, Mom.-None-On
D201 DPDT, On-None-On
D202 DPST, On-None-Off
D203 DPDT, On-Off-On
D501 SPDT, On-None-On
D502 SPST, On-None-Off
D503 SPDT, On-Off-On
D508 SPDT, Mom.-None-On
D601 DPDT, On-None-On
D602 DPST, On-None-Off
D608 DPDT, Mom.-None-On
Actuator Markings
NONE No marking
D ON-OFF
H O |
N Large dot
P O –
R Red rectangle on end
U Large dot on end
15 May 20
G–61
Rocker
Actuator
J1 Rocker
J5 Lever
Actuator Color
2 Black
1 White
Mounting Style/Color
3 Red
S2 Snap-in, black
B2 Recessed snap-in actuator guard, black
G2 Actuator guard, black
S1 Snap-in, white
Terminations
15 Quick connect
A Right angle, PC thru-hole
02 PC Thru-hole
05 Twisted quick connect
06 Extended PC thru-hole
17 Wirable quick connect
Contact Material
QA Silver
Gold plating options available contact Customer Service
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ckswitches.com
G
D Series
Miniature Snap-in Power Rocker Switches
SWITCH FUNCTION
POS. 1
NO.
POLES
MODEL
NO.
CONNECTED TERMINALS
POS. 1
POS. 2
POS. 3
AMP
RATING*
D102
D502
D101
D501
SP
SWITCH FUNCTION
POS. 2
POS. 3
4
10
SCHEMATIC
ON
D103
D503
10
D105
4
D108
D508
10
SPST
1
1A
NONE
ON
4
4
OPEN
OFF
N/A
4
10
NONE
1
ON
1-1A
OFF
OPEN
MOM.
OFF
MOM.
MOM.
NONE
ON
1-1B
1A
SPDT
1B
N/A
SPDT
Part number shown: D101J12S215QA
1
D202
4
D602
10
ON
NONE
OFF
OPEN
DPST
N/A
DP
D201
4
D601
10
D203
4
D608
10
1A
1-1A, 2-2A
ON
2A
1
2
NONE
ON
MOM.
2
1-1B, 2-2B
OFF
OPEN
NONE
N/A
1A
1B
2A
2B
DPDT
DPDT
ACTUATOR SHOWN IN POSITION 1
Part
number
shown:
D201J12S215QA
Part
number
shown:
D201J12S215QA
MOM. = Momentary
*AMP RATING: see G-60
Rocker
See CONTACT MATERIALS, page G-64.
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 May 20
G–62
www.ckswitches.com
D Series
Miniature Snap-in Power Rocker Switches
ACTUATOR COLOR
ACTUATOR
J1 ROCKER
ACTUATOR
J5 LEVER
SP
OPTION
CODE
DP
ACTUATOR
COLOR
2
BLACK
1
WHITE
3
RED
NOTE: Actuator finish: matte.
Other colors available, consult
Customer Service Center.
‘J5’ actuator available only with DP
models D201, D202, D601 and D602.
MOUNTING STYLE/COLOR
S SNAP-IN
B2 RECESSED SNAP-IN ACTUATOR GUARD, BLACK
OPTION
CODE
HOUSING
COLOR
2
(STD.) BLACK
1
WHITE
NOTE: Frame finish on housing: matte.
Other colors available, consult Customer
Service Center.
NOTE: Vertical mount, SP models only.
G2 ACTUATOR GUARD, BLACK
NOTE: Vertical mount, SP models only.
PANEL MOUNTING
DP MODELS
'S' mounting style
SP MODELS
'B2' mounting style
DIM ‘A’
SP & DP MODELS
‘S’ MOUNTING STYLE
DIM ‘A’
WITH ‘G2” OPTION
SP MODELS ONLY
DIM ‘A’
SP MODELS
‘B’ MOUNTING STYLE
.030–.049
(0,76) (1,24)
.756
(19,20)
.764
(19,41)
1.068
(27,13)
.049–.079
(1,24) (2,01)
.764
(19,41)
.780
(19,81)
1.076
(27,33)
.079–.118
(2,01) (3,00)
.780
(19,81)
n/a
1.092
(27,74)
Rocker
SP MODELS
'S' & 'G2' mounting styles
PANEL
THICKNESS
NOTE: Blank insert available for SP models only, see page G-64.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 May 20
G–63
www.ckswitches.com
G
D Series
Miniature Snap-in Power Rocker Switches
TERMINATIONS
A RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
Available with D101, D102, D501, D502 SP models only.
TERMINATIONS
02 PC THRU-HOLE
06 EXTENDED PC THRU-HOLE
SP
SP
DP
Available with DX01 and DX02 models only.
Available with DX01 and DX02 models only.
15 QUICK CONNECT
05 TWISTED QUICK CONNECT
SP
PC MOUNTING
(02 and 06)
DP
17 WIRABLE QUICK CONNECT
SP
DP
NOTE: Terminals are twisted.
Available with DX01 and DX02 models only.
DP
Available with DX01 and DX02 models only.
ACTUATORS
D ON-OFF
ON
OFF
H O |
N LARGE DOT
P O –
R RED RECTANGLE U LARGE DOT ON END
ON END
I
O
I
Rocker
NONE NO MARKING
O
‘D, H, P & U’ marking options: marking color white, standard for all actuator colors except white. Black marking color, standard
for white actuators. ‘R & N’ marking option: red marking color, standard. Consult Customer Service Center for other available marking colors.
G
NOTE: Orientation of actuator
markings and terminals.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 May 20
G–64
www.ckswitches.com
D Series
Miniature Snap-in Power Rocker Switches
CONTACT MATERIAL
OPTION
CODE
CONTACT AND
TERMINAL MATERIAL
RATINGS
D101, D102, D103, D105, D108, D201, D202, D203
QA
SILVER 1
GP (general purpose)
4 AMPS 125 VAC 50/60 Hz T85 10,000 cycles
2 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
R (resistive)
4 AMPS 30 VDC T85 10,000 cycles
D501, D502, D503, D508, D601, D602, D608
GP (general purpose)
10 AMPS 125 VAC 50/60 Hz T85 10,000 cycles
5 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
R (resistive)
10 AMPS 30 VDC T85 10,000 cycles
1MOVABLE CONTACT: D10X and D20X MODELS: Copper, silver plated.
D50X and D60X MODELS: Coin silver, silver plated.
0.4VA @ 20V AC/DC Gold plated options avilable contact Customer Service.
STATIONARY CONTACTS & TERMINALS: Copper or brass, silver plated.
AVAILABLE HARDWARE
Insert
SP Only
Recessed Actuator Guard,
SP Only
PART NO.
057190200 BLACK
599D02000 BLACK
Material: Nylon 6/6
Finish: Matte
Material: 6/6 Nylon
Finish: Matte
Actuator Guard
PART NO.
216C00000 IP54 SPLASH PROOF RUBBER BOOT
.748
(19,0)
.551
(14,0)
.787
(20,0)
.142
(3,6)
104C22000
.295
(7,5)
Material: PBT thermoplastic
Finish: Matte
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 May 20
G–65
www.ckswitches.com
Rocker
.957
(24,3)
PART NO.
G
DM Series
Miniature 2 Pole Power Rocker Switches
Features/Benefits
• 3 AMPS to 10 AMPS
• Quick connect terminals
• Double pole in miniature size
• Recessed bracket available—prevents
Typical Applications
• Computers
• Appliances
• Electric tools
accidental actuation
• RoHS compliant
UL 61058-1
Specifications
Materials
CONTACT RATING:
HOUSING & ACTUATOR: 6/6 nylon (UL94V-2), black.
DM21, DM22:
MOVABLE CONTACTS: DM2X Models: Copper, silver plated.
DM6X Models: Coin silver, silver plated.
GP (general purpose)
3 AMPS 125 VAC 50/60 Hz T85 10,000 cycles
2 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
R (resistive)
3 AMPS 30 VDC T85 10,000 cycles
DM61, DM62:
GP (general purpose)
10 AMPS 125 VAC 50/60 Hz T85 10,000 cycles
STATIONARY CONTACTS & TERMINALS: Copper or brass,
silver plated.
CONTACT SPRING: Music wire or stainless steel.
NOTE: Any models supplied with Q contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for standard switches.
For information on specific and custom switches, consult Customer Service Center.
5 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
R (resistive)
10 AMPS 30 VDC T85 10,000 cycles
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: -20ºC to +65ºC
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages G–66 and G–69. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
DM21 DPDT, On-On
DM22 DPST, On-Off
DM61 (STD.) DPDT, On-On
DM62 (STD.) DPST, On-Off
Actuator
J1 Rocker
Actuator Color
2 Black
1 White
Rocker
Housing Style/Color
S2 Snap-in, black
B2 Recessed snap-in actuator guard, black
G2 Actuator guard, black
G
Terminations
05 Quick connect
Actuator Markings
NONE No marking
D ON-OFF
H O |
Contact Material
P O –
Q Silver
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 May 20
G–66
www.ckswitches.com
DM Series
Miniature 2 Pole Power Rocker Switches
SWITCH FUNCTION
SWITCH FUNCTION
POS. 1
NO.
POLES
MODEL
NO.
CONNECTED TERMINALS
POS. 2
POS. 1
POS. 2
AMP
RATING*
SCHEMATIC
1
DM22
3
DM62
10
DM21
3
DM61
10
ON
OFF
1-1A, 2-2A
2
OPEN
DPST
DP
1A
2A
1
ON
1-1A, 2-2A
1-1B, 2-2B
DPDT
.793
[20,14]
.500
[12,7]
.350
[8,89]
2B
.028 TYP
[0,71]
1
2
2A
1B
2B
.731
[18,57]
.820
[20,83]
1A
2A
.138
[3,51]
1A
.220 TYP
[5,59]
1B
.080
[2,03]
DPDT
ON
2
.590
[15]
.301 TYP
[7,65]
PART NUMB ER SHOWN: DM21J1XS205Q
NOTES 1. ACTUATOR SHOWN IN POSITION 1-'ON' POSITION
RATINGS: See page G-65 for complete ratings.
UL 61058-1 tested to 30C temperature rise @ 6,000 cycles.
ACTUATOR COLOR
ACTUATOR
ACTUATOR
J1 ROCKER
OPTION
CODE
.390
[9,91]
.581
[14,76]
ACTUATOR
COLOR
2
BLACK
1
WHITE
NOTE: Actuator finish: matte. Other colors
available, consult Customer Service Center.
.138
[3,51]
HOUSING STYLE/COLOR
S2 SNAP-IN, BLACK
.590
[15]
B2 RECESSED SNAP-IN ACTUATOR GUARD, BLACK
.820
[20,83]
.793
[20,14]
.080
[2,03]
.080
[2,03]
Rocker
.820
[20,83]
1.308
[33,22]
1.200
[30,48]
NOTE: Housing finish: matte. Other colors
available, consult Customer Service Center.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 May 20
G–67
www.ckswitches.com
G
DM Series
Miniature 2 Pole Power Rocker Switches
HOUSING STYLE/COLOR
G2 ACTUATOR GUARD, BLACK
PANEL MOUNTING
.700
[17,78]
.050
[1,27]
'S2' & 'G2' housing styles
.940
[23,88]
NOTE: Blank insert available for SP models only, see page H–76.
.840
[21,34]
.350
[8,89]
.600
[15,24]
'B2' housing style
DIM ‘A’
DIM ‘A’
‘G2’ OPTION
‘B2’
SP MODELS ONLY HOUSING STYLES
PANEL
THICKNESS
DIM ‘A’
‘S2’ & ‘G2’
HOUSING STYLES
.030–.049
(0,76) (1,24)
.756
(19,20)
0.764
(19,41)
1.068
(27,13)
.049–.079
(1,24) (2,01)
.764
(19,41)
0.780
(19,81)
1.076
(27,33)
.079–.118
(2,01) (3,00)
.780
(19,81)
n/a
1.092
(27,74)
TERMINATIONS
05 QUICK CONNECT
.032 THICK
[0,81]
.048
[1,22]
.110
[2,79]
ACTUATOR MARKINGS
NONE NO MARKING
D ON-OFF
H O I
I
ON
P O –
O
OFF
NOTE: Orientation of actuator
markings and terminals.
‘D & P’ marking options: marking color white, standard for all actuator colors except white actuators. Black marking color standard for
white actuators. Consult Customer Service Center for other available marking colors.
CONTACT MATERIAL
OPTION
CODE
Rocker
Q
CONTACT AND
TERMINAL MATERIAL
SILVER 1,2
RATINGS
DM21, DM22:
GP (general purpose)
3 AMPS 125 VAC 50/60 Hz T85 10,000 cycles
2 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
R (resistive)
3 AMPS 30 VDC T85 10,000 cycles
DM61, DM62:
GP (general purpose)
10 AMPS 125 VAC 50/60 Hz T85 10,000 cycles
5 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
10 AMPS 30 VDC T85 10,000 cycles
R (resistive)
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1M
OVABLE CONTACT: DM2X Models: Copper, silver plated.
DM6X Models: Coin silver, silver plated.
2 STATIONARY CONTACTS & TERMINALS: Copper or brass, silver plated.
G
NOTE: Any models supplied with Q contact material are RoHS compliant.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 May 20
G–68
www.ckswitches.com
DM Series
Miniature 2 Pole Power Rocker Switches
AVAILABLE HARDWARE
Insert
Recessed Actuator Guard
PART NO.
PART NO.
057190200
599D02000
Material: Nylon 6/6
Finish: Matte
Material: 6/6 Nylon
Finish: Matte
Actuator Guard
PART NO.
216C00000 IP54 SPLASH PROOF RUBBER BOOT
.748
(19,0)
.551
(14,0)
.787
(20,0)
.957
(24,3)
PART NO.
.142
(3,6)
.295
(7,5)
104C22000
Material: PBT thermoplastic
Finish: Matte
Rocker
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 May 20
G–69
www.ckswitches.com
G
DM Series
Miniature Illuminated Power Rocker Switches
Features/Benefits
• 3 AMPS to 10 AMPS
• Illuminated LED
• Positive detent
• RoHS compliant
Typical Applications
• Instrumentation
• Industrial
• Office machines
UL 61058-1
Specifications
Materials
CONTACT RATING:
HOUSING: 6/6 nylon (UL94V-2), black.
DM14 and DM24 Models:
ACTUATOR: 6/6 nylon (UL94V-2), black.
GP (general purpose)
MOVABLE CONTACTS: DM14 and DM24 Models: Copper,
silver plated. DM54 and DM64 Models: Coin silver, silver plated.
3 AMPS @ 125 V AC; 2 AMPS @ 250 V AC.
R (resistive)
3 AMPS 30 VDC 10,000 cycles
STATIONARY CONTACTS & TERMINALS: Copper or brass,
silver plated.
DM54 and DM64 Models:
CONTACT SPRING: Music wire or stainless steel.
GP (general purpose)
10 AMPS @ 125 V AC; 5 AMPS @ 250 V AC (UL).
OPERATING TEMPERATURE: -20ºC to +65ºC
LED TERMINALS: Brass, unplated.
R (resistive)
10 AMPS 30 VDC 10,000 cycles
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
INSULATION RESISTANCE: 109 Ω min.
NOTE: Any models supplied with Q contact material are RoHS compliant.
NOTE: Specification and materials listed above are for standard switches.
For information on specific and custom switches, consult Customer Service Center.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages G–70 and G–73. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
DM14 SPST, 3 AMP
DM24 DPST, 3 AMP
DM54 SPST, 10 AMP
DM64 DPST, 10 AMP
Actuator
J7 Rocker with colorless
LED window
Actuator Color
2 Black
1 White
Housing Style/Color
S2 Snap-in, black
G2 Actuator guard, black
Rocker
Terminations
05 Quick connect
G
Contact Material
Q Silver
LED Color
3 Red
4 Amber
6 Green
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 May 20
G–70
www.ckswitches.com
DM Series
Miniature Illuminated Power Rocker Switches
SWITCH FUNCTION
SWITCH FUNCTION
POS. 1
DM14
3
DM54
10
SCHEMATIC
3
ON
OFF
1-1A
OPEN
1
SPST
1A
1
DM64
10
ON
OFF
1-1A, 2-2A
.080
[2,03]
.793
[20,14]
.350
[8,89]
.500
[12,7]
.028
[0,71]
.138
[3,51]
3
OPEN
DPST
DPDT
4
2
1A
2A
4
.220
[5,59]
1B
3
1
DM24
1A
DP
AMP
RATING*
2B
SP
POS. 2
2
MODEL
NO.
POS. 1
2A
NO.
POLES
CONNECTED TERMINALS
POS. 2
.730 .820
[18,54] [20,83]
.301
[7,65]
Actuator shown in pos. 1 – 'ON' position.
SPST MODELS (D M14 & DM54) OMIT TERM INALS 2 & 2A.
Part number shown: DM24J72S205Q3
* RATINGS: see page G-69.
ACTUATOR
J7 ROCKER WITH COLORLESS LED WINDOW
.390
[9,906]
OPTION
CODE
.581
[14,76]
ACTUATOR
COLOR
2
BLACK
1
WHITE
NOTE: Other colors available, consult
Customer Service Center.
.138
[3,51]
HOUSING STYLE/COLOR
S2 SNAP-IN, BLACK
.793
[20,14]
.590
[14,99]
.080
[2,03]
Rocker
.820
[20,83]
NOTE: Housing finish: matte. Other colors
available, consult Customer Service Center.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 May 20
G–71
www.ckswitches.com
G
DM Series
Miniature Illuminated Power Rocker Switches
HOUSING STYLE/COLOR
G2 ACTUATOR GUARD, BLACK
PANEL MOUNTING
.700
[17,78]
.050
[1,27]
'S2' & 'G2' housing style
NOTE: Blank insert available for SP models only, see page H-80.
.840
[21,34]
.940
[23,88]
PANEL
THICKNESS
DIM ‘A’
‘S2’ & ‘G2’
HOUSING STYLES
DIM ‘A’ with
‘G2’ option
SP MODELS ONLY
.030–.049
(0,76) (1,24)
0.756
(19,20)
0.764
(19,41)
.049–.079
(1,24) (2,01)
0.764
(19,41)
0.780
(19,81)
.079–.118
(2,01) (3,00)
.780
(19,81)
n/a
.350
[8,89]
.600
[15,24]
TERMINATIONS
05 QUICK CONNECT
.048
[1,22]
.032 THICK
[0,81]
.110
[2,79]
CONTACT MATERIAL
OPTION
CODE
Q
CONTACT AND
TERMINAL MATERIAL
SILVER 1,2
RATINGS
POWER
DM14, DM24:
GP (general purpose)
3 AMPS @ 125 V AC; 2 AMPS @ 250 V AC.
R (resistive)
3 AMPS 30 VDC 10,000 cycles
DM54, DM64:
GP (general purpose)
10 AMPS @ 125 V AC; 5 AMPS @ 250 V AC.
R (resistive)
10 AMPS 30 VDC 10,000 cycles
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
NOTE: Any models supplied with Q contact material are RoHS compliant.
1 MOVABLE
CONTACTS: DM14 and DM24 models: Copper, silver plated.
DM54 and DM64 models: Coin silver, silver plated.
2 STATIONARY CONTACTS & TERMINALS: Copper or brass, silver plated.
LED COLOR
Rocker
RECOMMENDED RESISTOR @ VOLTAGE
G
OPTION CODE
LED
COLOR
FORWARD
VFD
CURRENT
LLED
REVERSE
VR
INTENSITY
MCD
5V
12V
24V
3
Red
2.1
10
4V
1.6 typ.
270
1K
2.2K
4
Amber
2.2
20
4V
2.5 typ.
150
510
1.2K
6
Green
2.1
20
4V
2.0 typ.
150
510
1.2K
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 May 20
G–72
www.ckswitches.com
DM Series
Miniature Illuminated Power Rocker Switches
AVAILABLE HARDWARE
Blank Insert
Recessed Bracket
PART NO.
PART NO.
057190200
599D02000
Material: Zinc nylon 6/6
Finish: Matte
Material: 6/6 Nylon
Finish: Matte
Actuator Guard
PART NO.
104C22000
Material: PBT thermoplastic
Finish: Matte
Rocker
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 May 20
G–73
www.ckswitches.com
G
DF Series
Power Rocker Switches
Features/Benefits
• Power switching up to 16 AMPS
• Sub-panel and Front-panel mounting
• PC and quick connect terminals
• Multi-position and multi-pole function
• RoHS compliant
Typical Applications
• Computers
• Power supplies
• Appliances
• Fitness equipment
• Off-road vehicles
Specifications
Materials
CONTACT RATING: 16 AMPS @ 125, 250 V AC; 1/4 HP
@ 125 V AC; 1/2 HP @ 250 V AC; 6 AMPS @ 48 V DC,
2 AMPS @ 60 V DC, 11 AMPS @ 30 V DC
HOUSING & ACTUATOR: 6/6 nylon (UL 94V-2), black, finish: matte.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: -20ºC to +85ºC
CONTACTS: Fine silver, silver plated.
TERMINALS: Copper, silver plated.
CONTACT SPRING: Music wire or stainless steel.
NOTE: Specifications and materials listed above are for standard switches.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages G–74 thru G–76. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
DF52 SPST, Off-On
DF62 DPST, Off-On
DF72 SPDT, Off-On-On
Actuator
J1 Rocker
Actuator Color
2 Black
1 White
Housing Style/Color
S2 Sub-panel, black
G2 Actuator guard, black
P2 Panel, black
S1 Sub-panel, white
Terminations
15 Quick connect
A Right angle, PC thru-hole
Rocker
Actuator Markings
NONE No marking
D ON-OFF
H O |
Contact Material
P 0 –
QA Silver
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–74
www.ckswitches.com
DF Series
Power Rocker Switches
SWITCH FUNCTION
SWITCH FUNCTION
POS. 1
NO.
POLES
CONNECTED TERMINALS
POS. 2
POS. 1
POS. 2
MODEL
NO.
SCHEMATIC
1
SP
DF52
OFF
ON
OPEN
1-1A
SPST
1A
1
DP
DF62
OFF
ON
OPEN
2
1-1A, 2-2A
DPST
1A
2A
Part Number shown DF62J12S215QA
1.176
(29,87)
POS. 1
NO.
POLES
POS. 2
POS. 3
POS. 1
POS. 2
POS. 3
MODEL
NO.
SCHEMATIC
POS. 1
SP
DF72
OFF
ON
ON
OPEN
1 / 2-2A
POS. 2
1a
1 / 2-1A
1 / 2-2A
1
2a
2
POS. 3
1a
1
2a
2
1a
1
2a
2
All models
ACTUATOR COLOR
ACTUATOR
ACTUATOR
J1 ROCKER
OPTION
CODE
ACTUATOR
COLOR
2
BLACK
1
WHITE
Rocker
NOTE: Actuator finish: matte. Other colors
available, consult Customer Service Center.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–75
www.ckswitches.com
G
DF Series
Power Rocker Switches
HOUSING STYLE/COLOR
G2 ACTUATOR GUARD
S SUB-PANEL
1.176
(29,87)
NOTE: Not available with ‘A’ termination.
Available in black only.
NOTE: DF52 & DF62 models only.
P PANEL
OPTION
CODE
HOUSING
COLOR
2
(STD.) BLACK
1
WHITE
NOTE: Housing finish: matte. Other colors
available, consult Customer Service Center.
PANEL MOUNTING
1.176
(29,87)
NOTE: Not available with ‘A’ termination.
Available in black only.
PANEL THICKNESS
DIM ‘A’
.029–.048
(0,74) (1,22)
1.021
(25,93)
.048–.078
(1,22) (1,98)
1.029
(26,14)
.078–.117
(1,98) (2,97)
1.045
(26,54)
.075–.140
(1,91) (3,56)
1.075
(27,31)
DF52 & DF62 Models
with ‘S’ housing style
DF52, DF62 & DF72 Models
with ‘P2’ & ‘G2’ housing style
TERMINATIONS
15 QUICK CONNECT
.480
(12,19)
DF72 Models Only
A RIGHT ANGLE, PC THRU-HOLE
Rocker
PC MOUNTING
NOTE: DF52 and DF62 Models Only
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–76
www.ckswitches.com
DF Series
Power Rocker Switches
ACTUATOR MARKINGS
NONE NO MARKING
D ON-OFF
H O |
ON
O
O
I
OFF
P O –
I
O
I
II
1A
1
NOTE: Orientation of actuator
markings and terminals.
‘D, H, & P’ marking options: marking color white, standard for all actuator colors except white.
Marking color black, standard for white actuators. Consult Customer Service Center for other available marking colors.
CONTACT MATERIAL
OPTION
CODE
QA
CONTACT AND
TERMINAL MATERIAL
SILVER 1,2
RATINGS
POWER
16 AMPS @ 125, 250 V AC; 1/4 HP @ 125 V AC; 1/2 HP @ 250 V AC; 6 AMPS @ 48 V DC (UL),
2 AMPS @ 60 V DC, 11 AMPS @ 30 V DC
16 AMPS @ 125, 250 V AC; 1/4 HP @ 125 V AC; 1/2 HP @ 250 V AC (UL)
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 CONTACTS: Fine silver, silver plated.
2 TERMINALS: Copper, silver plated.
All models
AVAILABLE HARDWARE
Actuator Guard
PART NO.
285B02000
Material: Nylon 6/6
Finish: Matte
Rocker
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–77
www.ckswitches.com
G
CR Series
Round Single Pole Specialty Rocker Switches
Features/Benefits
• Round actuator and body
• Nice styling
• Multiple illuminated versions
available
• IP65 splash proof rubber
boot option
Typical Applications
• Appliances, small and large
• Office equipment
• Computers and peripherals
• Audio/Video equipment
• RoHS compliant
UL 61058-1
Specifications
Materials
CONTACT RATING:
16 AMPS @ 125 VAC, 10 AMPS @ 250 VAC.
16 AMPS @ 125 VAC, 10 AMPS @ 250 VAC.
ELECTRICAL LIFE: 10,000 make and break cycles at full load.
INSULATION RESISTANCE: 108 Ω min.
HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), matte finish.
ILLUMINATED ACTUATOR: Polycarbonate, matte finish.
CENTER CONTACTS: Silver plated, copper alloy.
END CONTACTS: Silver plated AgSn02ln03.
ALL TERMINALS: Silver plated, copper alloy.
DIELECTRIC STRENGTH: 1,500 VRMS @ sea level.
OPERATING TEMPERATURE: -20ºC to + 85ºC
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages G–78 through G–80. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
CR101 SPDT On-None-On
CR102 SPST On-None-Off
Actuator
J1 Rocker
J2* Two-tone rocker
J3 Illuminated rocker
J4** Circle, illuminated rocker
J5 Oval, illuminated rocker
JN Paddle, rocker
JP Paddle, illuminated rocker
Actuator Color
2 Black
1 White
3 Red
R Red, illuminated
A Amber, illuminated
G Green, illuminated
Mounting Style/Color
S2 Snap-in, black
S1 Snap-in, white
Termination
15 .187” quick connect
Rocker
Contact Rating
QF Silver
G
Lamp Rating
(NONE) No lamp
6 LED
7 125 VAC neon
8 250 VAC neon
* Refer to table on page G-79 for actuator options.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–78
www.ckswitches.com
CR Series
Round Single Pole Specialty Rocker Switches
SWITCH FUNCTION
CONNECTED TERMINALS
SWITCH FUNCTION
Pos. 1
NO.
POLES
Pos. 3
ON
NONE
Pos. 1
Pos. 2
ON
SP
CR102
NONE
SCHEMATIC
2-1
2-3
N/A
ON
Pos. 3
C&K marking on opposite side
C&K marking on opposite side
MODEL NO.
CR101
Pos. 2
OR
For 7 & 8
Illuminated Versions
OFF
+
–
ACTUATOR
J1
J3
ROCKER
J2
TWO-TONE ROCKER
ILLUMINATED ROCKER
.138
(3,5)
Rocker
NOTE: J3 actuator available with the combination of 7 & 8 lamp ratings and
CR102 switch function only.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–79
www.ckswitches.com
G
CR Series
Round Single Pole Specialty Rocker Switches
ACTUATOR
J4
J5
CIRCLE, ILLUMINATED ROCKER
OVAL, ILLUMINATED ROCKER
.138
(3,5)
.138
(3,5)
NOTE: Available with the combination of CR102 switch function and 6 lamp rating only.
NOTE: Available with the combination of CR102 switch function and 7 & 8 lamp ratings only.
JN PADDLE, ROCKER
JP PADDLE, ILLUMINATED ROCKER
.610
(15,5)
NOTE: JP actuator available with the combination of CR102 switch function and 7 & 8 lamp ratings only.
ACTUATOR COLOR
ACTUATOR OPTION
CODE
J1
2 BLACK
1 WHITE
3 RED
R
RED, ILLUMINATED
A
AMBER, ILLUMINATED
G
J3, J4
J5, JP
ACTUATOR
COLOR
ACTUATOR
OPTION ACTUATOR
CODE COLOR
TOP BOTTOM
1
2
3
4
BLACK WHTE
5
BLACK RED
J2
GREEN, ILLUMINATED
WHITE RED
WHITE BLACK
RED WHITE
J2 actuator only
MOUNTING STYLE/COLOR
PANEL MOUNTING
SNAP-IN, BLACK
SNAP-IN, WHITE
Rocker
S2
S1
Panel thickness:
2.0 - 3.0 mm
G
Panel thickness:
0.7 - 3.0 mm
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–80
www.ckswitches.com
CR Series
Round Single Pole Specialty Rocker Switches
TERMINATION
15
.187” QUICK CONNECT
For switches with LED option
CONTACT MATERIAL
OPTION
CODE
CONTACT AND
TERMINAL MATERIAL
QF
SILVER
RATINGS
POWER
16 AMPS @ 125 VAC; 10 AMPS @ 250 VAC
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
LAMP RATING
(NONE) NO LAMP
6 LED RATING @ 10 mA Vf=1.85V
7 125 VAC 33kΩ NEON
8 250 VAC 150kΩ NEON
ACCESSORIES
377C00000 IP65 SPLASH PROOF RUBBER BOOT
.756 DIA.
(19,2)
.960 DIA.
(24,4)
.307
(7,8)
.129
(3,28)
Rocker
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–81
www.ckswitches.com
G
CG Series
Single Pole Power Rocker Switches
Features/Benefits
• Bevelled frame
• Illuminated versions available
• Easy panel mount installation
Typical Applications
• Computers and peripherals
• Small appliances
• Instrument panels
• Industrial controls
• RoHS compliant
UL 61058-1
Specifications
Materials
CONTACT RATING:
16 AMPS @ 125 VAC, 10 AMPS @ 250 VAC.
10 AMPS @ 250 VAC, 6 AMPS @ 250 VAC.
ELECTRICAL LIFE: 10,000 make and break cycles at full load.
INSULATION RESISTANCE: 108 Ω min.
HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, matte finish.
ILLUMINATED ACTUATOR: Polycarbonate, matte finish.
CENTER CONTACTS: Silver plated, copper alloy.
END CONTACTS: Silver plated.
ALL TERMINALS: Silver plated, copper alloy.
DIELECTRIC STRENGTH: 1,500 VRMS @ sea level.
OPERATING TEMPERATURE: -20ºC to +85ºC
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages G–87 through G–89. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
CG101 SPDT On-None-On
CG102 SPST On-None-Off
CG103 SPDT On-Off-On
CG105 SPDT Mom-Off-Mom
CG12 * SPST On-None-Off
Actuator
J1 Rocker
J2 **Two-tone rocker
J3 Illuminated rocker
Actuator Color
2 Black
1 White
3 Red
R Red, illuminated
A Amber, illuminated
G Green, illuminated
Mounting Style/Color
S2 Snap-in, black
S1 Snap-in, white
Termination
05 .250” quick connect
Actuator Marking
(NONE) No marking
D ON-OFF
H ”O l” - international ON-OFF
P ”O -” international ON-OFF
Lamp Rating
(NONE) No lamp
7 125 VAC neon
8 250 VAC neon
Rocker
* CG12 — for switches with both marking and illumination
Contact Rating
QF Silver
** J2 — refer to table on next page for actuator options
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–83
www.ckswitches.com
G
CG Series
Single Pole Power Rocker Switches
SWITCH FUNCTION
CONNECTED TERMINALS
SWITCH FUNCTION
Pos. 1
NO.
POLES
Pos. 2
Pos. 3
Pos. 3
SCHEMATIC
C&K marking on opposite side
C&K marking on opposite side
MODEL NO.
Pos. 2
Pos. 1
CG101
ON
NONE
ON
1-2
CG102
ON
NONE
OFF
1-2
N/A
OPEN
CG103
ON
OFF
ON
1-2
OPEN
2-3
CG105
MOM
OFF
MOM
1-2
OPEN
2-3
CG12 *
ON
NONE
OFF
1-2
N/A
OPEN
2-3
OR
For Illuminated
Version
SP
* CG12 - for switches with both marking and illumination
Shown in Pos. 1
ACTUATOR
J2
ROCKER
TWO-TONE ROCKER
ILLUMINATED ROCKER
Rocker
J1
J3
NOTE: J3 actuator available with CG102 switch function only.
G
NOTE: Available with CG102 switch function only.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–84
www.ckswitches.com
CG Series
Single Pole Power Rocker Switches
ACTUATOR COLOR
ACTUATOR OPTION
CODE
2 BLACK
1 WHITE
3 RED
R
A
G
J1
J3
ACTUATOR
COLOR
RED, ILLUMINATED
AMBER, ILLUMINATED
GREEN, ILLUMINATED
OPTION ACTUATOR
CODE COLOR
TOP BOTTOM
1
WHITE RED
2
3
WHITE BLACK
4
5
BLACK WHTE
RED WHITE
BLACK RED
J2 actuator only
MOUNTING STYLE/COLOR
S2
S1
SNAP-IN, BLACK
SNAP-IN, WHITE
PANEL MOUNTING
Shown in Pos. 1
TERMINATION
05
.250” QUICK CONNECT
Shown in Pos. 1
“X”
“Y”
0.030-0.049 (0,75-1,25)
PANEL THICKNESS
1.087-.004 (27,6-0,1)
0.543+.004 (13,8+0,1)
0.049-0.079 (1,25-2,0)
1.094-.004 (27,8-0,1)
0.543+.004 (13,8+0,1)
1.102-.004 (28,0-0,1)
0.543+.004 (13,8+0,1)
0.079-0.118 (2,0-3,0)
CG Series
Single Pole Power Rocker Switches
ACTUATOR MARKING
NONE
H
NO MARKING
Ol
D
ON-OFF
P
O-
NOTE: Orientation of actuator marking and terminals.
Shown in Pos. 1
CONTACT MATERIAL
OPTION
CODE
CONTACT AND
TERMINAL MATERIAL
QF
SILVER
RATINGS
16 AMPS @ 125 VAC; 10 AMPS @ 250 VAC
10 AMPS @ 250 VAC
POWER
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
LAMP RATING
(NONE) NO LAMP
7 125 VAC 33kΩ NEON
8 250 VAC 150kΩ NEON
Rocker
NOTE: Lamp rating for J3 actuator option.
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–86
www.ckswitches.com
CL Series
Single Pole Power Rocker Switches
Features/Benefits
• Illuminated versions available
• Positive detent
• Snap-in mounting
Typical Applications
• Floor care products
• Power outlet strips
• HVAC units
• RoHS compliant
Specifications
Materials
CONTACT RATING:
16 AMPS @ 125 VAC, 1/3 HP;
10 AMPS @ 250 VAC, 1/2 HP.
ELECTRICAL LIFE: 10,000 make and break cycles at full load.
INSULATION RESISTANCE: 108 Ω min.
HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, matte finish.
ILLUMINATED ACTUATOR: Polycarbonate, matte finish.
CENTER CONTACTS: Silver plated, copper alloy.
END CONTACTS: Silver plated.
ALL TERMINALS: Silver plated, copper alloy.
DIELECTRIC STRENGTH: 1,500 VRMS @ sea level.
OPERATING TEMPERATURE: -20ºC to +80ºC
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages G–91 through G–93. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
CL101 SPDT On-None-On
CL102 SPST On-None-Off
CL12 * SPST On-None-Off
Actuator
J7 Rocker
J9 Illuminated rocker
Actuator Color
2 Black
1 White
3 Red
R Red, illuminated
A Amber, illuminated
G Green, illuminated
Mounting Style/Color
S2 Snap-in, black
S1 Snap-in, white
Termination
05 .250” quick connect
Actuator Marking
(NONE) No marking
D ON-OFF
H ”O l” - international ON-OFF
P ”O -” international ON-OFF Contact Rating
QA Silver
Rocker
Lamp Rating
(NONE) No lamp
7 125 VAC neon
8 250 VAC neon
* CL12 - for switches with both marking and illumination
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–87
www.ckswitches.com
G
CL Series
Single Pole Power Rocker Switches
SWITCH FUNCTION
CONNECTED TERMINALS
SWITCH FUNCTION
Pos. 1
NO.
POLES
Pos. 1
Pos. 3
ON
NONE
Pos. 2
Pos. 3
SCHEMATIC
C&K marking on opposite side
C&K marking on opposite side
MODEL NO.
CL101
Pos. 2
ON
2-3
2-1
N/A
SP
CL102
ON
NONE
OPEN
OFF
2-1
CL12 *
ON
NONE
OR
For Illuminated
Version
OFF
* CL12 - for switches with both marking and illumination
Shown in Pos. 1
ACTUATOR
J7 ROCKER
J9 ILLUMINATED ROCKER
NOTE: J9 actuator available with CL102 & CL12 switch function only.
Rocker
ACTUATOR COLOR
G
OPTION
CODE
ACTUATOR
COLOR
2 BLACK
1 WHITE
3 RED
R
RED, ILLUMINATED
A
G
AMBER, ILLUMINATED
GREEN, ILLUMINATED
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–88
www.ckswitches.com
CL Series
Single Pole Power Rocker Switches
MOUNTING STYLE/COLOR
S2
S1
SNAP-IN, BLACK
SNAP-IN, WHITE
PANEL MOUNTING
“X”
“Y”
0.030-0.049 (0,75-1,25)
PANEL THICKNESS
1.126-.004 (28,6-0,1)
0.551+.004 (14,0+0,1)
0.049-0.079 (1,25-2,0)
1.134-.004 (28,8-0,1)
0.551+.004 (14,0+0,1)
1.150-.004 (29,2-0,1)
0.551+.004 (14,0+0,1)
0.079-0.118 (2,0-3,0)
Shown in Pos. 1
TERMINATION
05
.250” QUICK CONNECT
Shown in Pos. 1
ACTUATOR MARKING
NONE
H
Ol
NO MARKING
D
ON-OFF
P
O-
Rocker
NOTE: Orientation of actuator marking and terminals.
Shown in Pos. 1
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–89
www.ckswitches.com
G
CL Series
Single Pole Power Rocker Switches
CONTACT MATERIAL
OPTION
CODE
CONTACT AND
TERMINAL MATERIAL
QA
SILVER
RATINGS
16 AMPS @ 125 VAC; 1/3 HP;
POWER
10 AMPS @ 250 VAC, 1/2 HP
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
LAMP RATING
(NONE) NO LAMP
7 125 VAC 33kΩ NEON
8 250 VAC 150kΩ NEON
Rocker
NOTE: Lamp rating for J9 actuator option.
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–90
www.ckswitches.com
CM Series
Single Pole Power Rocker Switches
Features/Benefits
• Illuminated versions available
• Easy to install snap-in design
•
Multiple actuator and termination
styles to choose from
Typical Applications
• Computers and peripherals
• Power supplies
• Industrial equipment
• Small appliances
• RoHS compliant
Specifications
CONTACT RATING:
16 AMPS @ 125 VAC, 1/8 HP;
10 AMPS @ 250 VAC, 1/3 HP.
ELECTRICAL LIFE: 10,000 make and break cycles at full load.
INSULATION RESISTANCE: 108 Ω min.
DIELECTRIC STRENGTH: 1,500 VRMS @ sea level.
OPERATING TEMPERATURE: -20ºC to +80ºC
Materials
HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, gloss or
matte finish.
ILLUMINATED ACTUATOR: Polycarbonate, gloss or matte finish.
CENTER CONTACTS: Silver plated, copper alloy.
END CONTACTS: Silver plated.
ALL TERMINALS: Silver plated, copper alloy.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages G–95 through G–97. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
CM101 SPDT On-None-On
CM102 SPST On-None-Off
CM103 SPDT On-Off-On
CM107 SPDT On-Off-Mom.
CM12 * SPST On-None-Off
Actuator
J1 Rocker
J3 Illuminated rocker
Actuator Color
2 Black
1 White
3 Red
R Red, illuminated
A Amber, illuminated
G Green, illuminated
Mounting Style/Color
S2 Snap-in, black
S4 Snap-in, black
S1 Snap-in, white
Termination
S3 Snap-in, white
05 .250” quick connect
07 Solder lug
* CM12 - for switches with both marking and illumination
Rocker
Actuator Marking
(NONE) No marking
D ON-OFF
H ”O l” - international ON-OFF
P ”O -” international ON-OFF
Contact Rating
QA Silver
Lamp Rating
(NONE) No lamp
7 125 VAC neon
8 250 VAC neon
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
16 May 18
G–91
www.ckswitches.com
G
CM Series
Single Pole Power Rocker Switches
SWITCH FUNCTION
CONNECTED TERMINALS
SWITCH FUNCTION
Pos. 1
NO.
POLES
Pos. 3
Pos. 1
ON
NONE
Pos. 2
Pos. 3
SCHEMATIC
C&K marking on opposite side
C&K marking on opposite side
MODEL NO.
CM101
Pos. 2
2-3
ON
N/A
CM102
ON
NONE
OFF
OPEN
For Illuminated
Version
2-1
SP
CM103
ON
OFF
ON
CM107
ON
OFF
MOM.
CM12 *
ON
NONE
OFF
OR
OPEN
2-3
N/A
OPEN
*C
M12 - for switches with both
marking and illumination
Shown in Pos. 1
ACTUATOR
ROCKER
ILLUMINATED ROCKER
Rocker
J1
J3
NOTE: J3 actuator available with CM102 & CM12 switch function only.
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
16 May 18
G–92
www.ckswitches.com
CM Series
Single Pole Power Rocker Switches
ACTUATOR COLOR
OPTION
CODE
ACTUATOR
COLOR
2 BLACK
1 WHITE
3 RED
R
A
G
RED, ILLUMINATED
AMBER, ILLUMINATED
GREEN, ILLUMINATED
MOUNTING STYLE/COLOR
S2
S1
S4
S3
SNAP-IN, BLACK
SNAP-IN, WHITE
SNAP-IN, BLACK (SHORT FRAME)
SNAP-IN, WHITE
PANEL MOUNTING
Shown in Pos. 1
Shown in Pos. 1
“X”
“Y”
0.030-0.049 (0,75-1,25)
PANEL THICKNESS
1.189-.004 (30,2-0,1)
0.441+.004 (11,2+0,1)
0.049-0.079 (1,25-2,0)
1.197-.004 (30,4-0,1)
0.441+.004 (11,2+0,1)
1.212-.004 (30,8-0,1)
0.441+.004 (11,2+0,1)
0.079-0.118 (2,0-3,0)
TERMINATION
05
07
.250 QUICK CONNECT
.709
(18,0)
.429
(10,9)
2
3
.031
(0,8)
1.071
(27,2)
1.124
(28,55)
.063 DIA.
(1,60)
.250
(6,35)
Rocker
1
SOLDER LUG
.185
(4,7)
NOTE: Available with CM101 & CM102 switch functions only.
Shown in Pos. 1
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
16 May 18
G–93
www.ckswitches.com
G
CM Series
Single Pole Power Rocker Switches
ACTUATOR MARKING
NONE
H
NO MARKING
Ol
D
ON-OFF
P
O-
NOTE: Orientation of actuator marking and terminals.
Shown in Pos. 1
CONTACT MATERIAL
OPTION
CODE
CONTACT AND
TERMINAL MATERIAL
QA
SILVER
RATINGS
16 AMPS @ 125 VAC; 1/8 HP
POWER
10 AMPS @ 250 VAC, 1/3 HP
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
LAMP RATING
(NONE) NO LAMP
7 125 VAC 33kΩ NEON
8 250 VAC 150kΩ NEON
Rocker
NOTE: Lamp rating for J3 & J8 actuator option.
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
16 May 18
G–94
www.ckswitches.com
CN Series
Double Pole Power Rocker Switches
Features/Benefits
• Illuminated versions available
• Multiple actuator and
termination styles
• Robust design
• Custom version upon request
• RoHS compliant
Typical Applications
• Appliances
• Office equipment
• Computers and peripherals
• Off-road vehicles
• Industrial machines
• HVAC units
• Transportation
Specifications
CONTACT RATING:
See table for Q and QA ratings on the last page of this series.
ELECTRICAL LIFE: 10,000 make and break cycles at full load.
INSULATION RESISTANCE: 108 Ω min.
DIELECTRIC STRENGTH: 1,500 VRMS @ sea level.
OPERATING TEMPERATURE: -20ºC to +85ºC
HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, matte finish.
ILLUMINATED ACTUATOR: Polycarbonate, matte finish.
CENTER CONTACTS: Silver plated, copper alloy.
END CONTACTS: Silver plated AgSu02ln03.
ALL TERMINALS: Silver plated, copper alloy.
Note: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Materials
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages G–99 through G–101. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
CN201 DPDT On-None-On
CN202 DPST On-None-Off
CN22 * DPST On-None-Off
Actuator
J1 Rocker
J3 Illuminated rocker
J6 Rocker
J8 Illuminated rocker
Actuator Color
2 Black
1 White
3 Red
R Red, illuminated
A Amber, illuminated
G Green, illuminated
Mounting Style/Color
S2 Snap-in, black
S4 Snap-in, black
S1 Snap-in, white
S3 Snap-in, white
Termination
15 .187” quick connect
05 .250” quick connect
Actuator Marking
(NONE) No marking
D ON-OFF
H ”O l” - international ON-OFF
P ”O -” international ON-OFF
* CN22 - for switches with both marking and illumination
Rocker
Contact Rating
Q Silver
QA Silver (with HP rating)
Lamp Rating
(NONE) No lamp
7 125 VAC neon
8 250 VAC neon
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–95
www.ckswitches.com
G
CN Series
Double Pole Power Rocker Switches
SWITCH FUNCTION
CONNECTED TERMINALS
SWITCH FUNCTION
Pos. 1
NO.
POLES
Pos. 3
Pos. 1
ON
NONE
2-1
4-5
ON
NONE
Pos. 3
SCHEMATIC
2-3
6-5
ON
DP
CN202
Pos. 2
C&K marking on opposite side
C&K marking on opposite side
MODEL NO.
CN201
Pos. 2
N/A
OFF
OPEN
1A
2A
3A
1B
2B
3B
1A
2A
1B
2B
OR
1A
1B
2A
2B
For Illuminated
Version
CN22 *
ON
NONE
OFF
* CN22 - for switches with both marking and illumination
1b
2b
3b
Shown in Pos. 1
ACTUATOR
Rocker
J1
J3
G
J6
J8
ROCKER
ILLUMINATED ROCKER
NOTE: J1 & J3 actuators available with Q contact rating only.
J3 actuator available with CN202 & CN22 switch function
only.
ROCKER
ILLUMINATED ROCKER
NOTE: J6 & J8 actuators available with QA contact rating only.
J6 actuator available with CN201 & CN202 switch functions,
J8 actuator available with CN202 & CN22 switch function only.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–96
www.ckswitches.com
CN Series
Double Pole Power Rocker Switches
ACTUATOR COLOR
OPTION
CODE
ACTUATOR
COLOR
2 BLACK
1 WHITE
3 RED
R
RED, ILLUMINATED
A
AMBER, ILLUMINATED
G
GREEN, ILLUMINATED
MOUNTING STYLE/COLOR
S2
S1
SNAP-IN, BLACK
S4
SNAP-IN, BLACK
SNAP-IN, WHITE
S3
SNAP-IN, WHITE
1b
2b
3b
1b
2b
3b
NOTE: Available with 15 termination and Q contact rating only.
Shown in Pos. 1
NOTE: Available with 05 termination and QA contact rating only.
PANEL MOUNTING
PANEL THICKNESS
Shown in Pos. 1
“X”
“Y”
0.030-0.049 (0,75-1,25)
1.190-.004 (30,2-0,1)
0.874+.004 (22,2+0,1)
0.049-0.079 (1,25-2,0)
1.197-.004 (30,4-0,1)
0.874+.004 (22,2+0,1)
1.213-.004 (30,8-0,1)
0.874+.004 (22,2+0,1)
0.079-0.118 (2,0-3,0)
TERMINATION
TERMINA
15
.187” QUICK CONNECT
05
.250” QUICK CONNECT
1b
2b
3b
.102 DIA.
(ø2,6)
NOTE: Available with S1 & S2 mounting style and Q contact rating only.
Shown in Pos. 1
.425
(1,8)
NOTE: Available with S3 & S4 mounting styles and QA contact rating,
CN201 & CN202 switch functions only.
.250
(6,35)
Rocker
.413
(10,5)
Shown in Pos. 1
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–97
www.ckswitches.com
G
CN Series
Double Pole Power Rocker Switches
ACTUATOR MARKING
NO MARKING
D
ON-OFF
P
O-
Ol
1b
H
2b
3b
NONE
NOTE: Orientation of actuator marking and terminals.
Shown in Pos. 1
CONTACT MATERIAL
OPTION
CODE
CONTACT AND
TERMINAL MATERIAL
RATINGS
16A @ 125C 1/3 HP @ 125 V AC
Q
SILVER
QA
POWER
10A @ 250 V AC 1/2HP @ 250 V AC
16A @ 125 VAC, 1/8 HP @ 125 V AC;
10 A @ 250 VAC, 1/3 HP @ 250 V AC
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
LAMP RATING
Rocker
(NONE) NO LAMP
7 125 VAC 33kΩ NEON
8 250 VAC 150kΩ NEON
NOTE: Lamp rating for J3 & J8 actuator options.
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–98
www.ckswitches.com
CA Series
Power Rocker Switches
Features/Benefits
• 15 AMPS @ 125 V AC
• Cosmetic slimline detail
• Positive detent
Typical Applications
• Hair dryers and other small appliances
• HVAC and other large appliances
• RoHS compliant
Specifications
Materials
CONTACT RATING: 15 AMPS @ 125 V AC;
10 AMPS @ 250 V AC;
1/4 HP @ 125 V AC or 250 V AC
HOUSING: 6/6 nylon (UL 94V-2), black.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
TERMINALS: Copper, silver plated.
ACTUATOR: Polycarbonate (UL 94V-2), black.
CONTACTS: Coin silver, silver plated.
INSULATION RESISTANCE: 109 Ω min.
CONTACT SPRING: Music wire.
NOTE: Specifications and material listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: -30ºC to +65ºC
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages G–106 through G–108. For additional options not shown in catalog, consult Customer Service
Center.
Switch Function
CA01 SPDT, On-On
CA02 SPST, On-Off
CA21 DPDT, On-On
CA22 DPST, On-Off
Actuator
J1 Rocker with gloss finish
J7 Curved rocker with matte
finish
Actuator Color
2 Black
1 White
3 Red
6 Green
Housing Color
2 Black
Terminations
07 Quick connect
Contact Material
Q Silver
Rocker
Actuator Markings
NONE No marking
D ON-OFF
H O |
P O –
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–99
www.ckswitches.com
G
CA Series
Power Rocker Switches
SWITCH FUNCTION
SWITCH FUNCTION
NO.
POLES
POS. 1
POS. 2
CONNECTED TERMINALS
POS. 1
POS. 2
MODEL
NO.
CA01
SCHEMATIC
ON
ON
1-1A
1-1B
SP
SPDT
CA02
ON
OFF
1-1A
OPEN
SPST
1A
1
SPST
Part number shown: CA02J12207Q
CA21
ON
ON
1-1A, 2-2A
1-1B, 2-2B
DPDT
CA22
ON
OFF
1-1A, 2-2A
OPEN
DPST
DP
DPDT
Part number shown: CA21J12207Q
Rocker
For complete contact ratings and agency approvals, see CONTACT MATERIAL section, page G–108.
Contacts make on side opposite actuator thrown.
G
All models
with all options.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–100
www.ckswitches.com
CA Series
Power Rocker Switches
ACTUATOR
J1 ROCKER WITH GLOSS FINISH
J7 CURVED ROCKER WITH MATTE FINISH
SP
SP
.215
(5,46)
DP
DP
ACTUATOR COLOR
OPTION
CODE
OPAQUE
ACTUATOR COLOR
1
WHITE
2
BLACK
3
RED
6
GREEN
NOTE: Actuator finish: matte. Special colors
available, consult Customer Service Center.
HOUSING COLOR
OPTION
CODE
2
HOUSING
COLOR
BLACK
NOTE: Housing frame finish: matte.
Rocker
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–101
www.ckswitches.com
G
CA Series
Power Rocker Switches
TERMINATIONS
07 QUICK CONNECT
SP
.394
(10,0)
PANEL THICKNESS
DIM ‘A’
.059–.078
(1,50) (2,00)
1.102
(28,00)
.078–.118
(2,00) (3,00)
1.110
(28,20)
.118–.177
(3,00) (4,50)
1.126
(28,60)
ACTUATOR MARKINGS
D ON-OFF
H O |
P O –
ON
I
NONE NO MARKING
OFF
O
I
O
NOTE: Orientation of actuator
markings and terminals
Marking color white, standard for all actuator colors except white and yellow. Marking color black, standard for
white and yellow actuators. Consult Customer Service Center for other available markings and colors.
CONTACT MATERIAL
OPTION
CODE
CONTACT AND
TERMINAL MATERIAL
RATINGS
10 AMPS @ 250 VAC
Q
SILVER1
POWER
15 AMPS @ 125 VAC
1/4 HP 125/250 VAC
Rocker
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
G
1C
ONTACTS: Coin silver, silver plated.
TERMINALS: Copper, silver plated.
All models
with all options.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–102
www.ckswitches.com
CA Series
Illuminated Power Rocker Switches
Features/Benefits
• 15 AMPS @ 125 V AC
• Illuminated actuator
• Various actuator styles
Typical Applications
• Power outlet strips
• Appliances
• Handling and packaging machines
• RoHS compliant
Specifications
Materials
CONTACT RATING: 15 AMPS @ 125 V AC; 10 AMPS
@ 250 V AC; 1/4 HP @ 125 V AC or 250 V AC.
HOUSING: 6/6 nylon (UL 94V-2), black.
ACTUATOR: Polycarbonate (UL 94V-2), red.
CONTACTS: Coin silver, silver plated.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
OPERATING TEMPERATURE: -30ºC to +65ºC
LAMP LIFE: 20,000 hours typ.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages G–103 through G–105. For additional options not shown in catalog, consult Customer Service
Center.
Switch Function
CA04 SPST, On-Off
CA24 DPST, On-Off
Actuator
J1 Rocker
J7 Curved rocker
Actuator Color
3 Red translucent
5 Yellow translucent
6 Green translucent
Lamp Voltage
7 125 V neon
8 250 V neon
Housing Color
2 Black
1 White
Terminations
07 Quick connect
Rocker
Actuator Markings
NONE No markings
D ON-OFF
H O |
Contact Material
P O –
Q Silver
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–103
www.ckswitches.com
G
CA Series
Illuminated Power Rocker Switches
SWITCH FUNCTION
SWITCH FUNCTION
NO.
POLES
SP
POS. 1
POS. 2
CONNECTED TERMINALS
POS. 1
POS. 2
SCHEMATIC
MODEL
NO.
CA04
1
ON
OFF
1-1A
2
OPEN
SPST
1A
2A
SPST
Part number shown: CA04J137207Q
DPST
DP
CA24
ON
OFF
1-1A, 2-2A
OPEN
1B
1
1A
DPST
Part number shown: CA24J137207Q
See CONTACT MATERIAL section, page G–105, for complete contact ratings and agency approvals.
Contacts make on side opposite actuator thrown.
with all options.
Rocker
All models
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–104
www.ckswitches.com
CA Series
Illuminated Power Rocker Switches
ACTUATOR
J7 CURVED ROCKER
J1 ROCKER
SP
SP
.215
(5,46)
DP
DP
ACTUATOR COLOR
NEON LAMP VOLTAGE
7 125 V NEON
8 250 V NEON
OPTION
CODE
ACTUATOR
COLOR
3
RED TRANSLUCENT
5
YELLOW
6
GREEN
NOTE: Special colors available,
consult Customer Service Center.
HOUSING COLOR
HOUSING
COLOR
2
BLACK
1
WHITE
Rocker
OPTION
CODE
NOTE: Housing frame finish: matte. Special colors
available, consult Customer Service Center.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–105
www.ckswitches.com
G
CA Series
Illuminated Power Rocker Switches
TERMINATIONS
07 QUICK CONNECT
PANEL MOUNTING
SP
DP
SP
DP
PANEL THICKNESS
'A'
.394
(10,0)
'A'
.394
(10,0)
DIM ‘A’
.059–.078
(1,50) (2,00)
1.102
(28,00)
.078–.118
(2,00) (3,00)
1.110
(28,20)
.118–.177
(3,00) (4,50)
1.126
(28,60)
ACTUATOR MARKINGS
D ON-OFF
H O I
P O –
ON
I
NONE NO MARKING
OFF
O
2
I
O
NOTE: Orientation of actuator
markings and terminals
Marking color white, standard for all actuator colors except yellow. Marking color black, standard for
yellow actuators. Consult Customer Service Center for other available markings and colors.
CONTACT MATERIAL
OPTION
CODE
CONTACT AND
TERMINAL MATERIAL
Q
SILVER1
RATINGS
10 AMPS @ 250 VAC
POWER
15 AMPS @ 125 VAC
1/4 HP 125/250 VAC
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
All models
with all options.
Rocker
1C
ONTACTS: Coin silver, silver plated.
TERMINALS: Copper, silver plated.
G
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G–106
www.ckswitches.com