V05X150E

Technical Data ELX1078 Effective August 2021 AMLV Automotive grade multilayer varistor Applications Product features • AEC-Q200 qualified • Seven compact footprint options: 0402 (1005 metric) , 0603 (1608 metric), 0805 (2012 metric), 1206 (3216 metric), 1210 (3225 metric), 1812 (4532 metric), 2220 (5750 metric) • Working voltage: 5.5 Vdc to 56 Vdc 4.0 Vac to 40 Vac • Bi-directional • Peak current (8/20 μs) up to 1200 A • Multilayer construction suited for high reliability automotive applications • V-jump and load-dump protection • Meets moisture sensitivity level (MSL): 1 • Various automotive electrical control unit (ECU) applications • Automotive bus systems (LIN, CAN, CAN-FD, FlexRay) • Advanced driver assistance system (ADAS) • In vehicle infotainment system (IVI) • Seat motor circuit • LED driver/ LED lamp • Keyless entry • Bluetooth • Wiper motor • Door control module Environmental compliance HALOGEN Pb HF FREE Ordering part number AMLV 04 V05 C033 Family name Package size Working voltage (Vdc) Capacitance code (pf) AMLV Automotive grade multilayer varistor  Technical Data ELX1078 Effective Augst 2021 Product specifications Maximum clamping voltage 8/20 μs Energy absorption 10/1000 μs Peak current 8/20 μs Typical capacitance Vjump (5 min) @ 1 MHz WLD (10x) Leakage current @ Vdc (V) (J) (A) (pF) (V) (J) (µA) 13.2 31 @ 1 A 0.02 4 33 @ 1 MHz - - ≤20 13.2 30 @ 1 A 0.05 10 90 @ 1 MHz - - ≤20 22 28 55 @ 1 A 0.03 2 12 @ 1 MHz - - ≤20 22 28 50 @ 1 A 0.05 20 40 @ 1 MHz - - ≤20 7 11 16 29 @ 1 A 0.1 30 490 @ 1 MHz - - ≤20 14 23 30 55 @ 1 A 0.03 2 12 @ 1 MHz - - ≤20 26 20 31 38 60 @ 1 A 0.1 30 110 @ 1 MHz - - ≤20 AMLV06V32C010 32 25 51.9 70.1 120 @ 1 A 0.05 5 10 @ 1 MHz - - ≤20 AMLV08V16C650 16 12 21.6 26.4 40 @ 1 A 0.3 120 650 @ 1 kHz 24.5 1 ≤20 AMLV08V18C650 18 14 23 28 44 @ 1 A 0.3 120 650 @ 1 kHz 24.5 1 ≤20 AMLV08V26C500 26 20 29.7 36.3 56 @ 1 A 0.3 80 500 @ 1 kHz 27 1 ≤20 AMLV08V31C250 Part number Working voltage (Vdc) (Vac) Varistor voltage @ 1 mAdc (V min) (V max) AMLV04V05C033 5.5 4 8.8 AMLV04V05C090 5.5 4 8.8 AMLV04V18C012 18 14 AMLV04V18C040 18 14 AMLV06V09C490 9 AMLV06V18C012 18 AMLV06V26C110 31 25 35.1 42.9 67 @ 1 A 0.3 80 250 @ 1 kHz 29 0.5 ≤20 AMLV12V18C1000 18 14 22.95 28.05 42 @ 1 A 0.6 150 1000 @ 1 kHz 24.5 1.5 ≤20 AMLV12V26C800 26 20 29.7 36.3 54 @ 1 A 0.7 200 800 @ 1 kHz 27.5 1.2 ≤20 AMLV12V34C550 34 26 42.3 51.7 77 @ 1 A 0.4 200 550 @ 1 kHz 50 1.5 ≤20 AMLV12V48C270 48 37 55.8 68.2 100 @ 1 A 0.4 100 270 @ 1 kHz 59 1.2 ≤20 AMLV12V56C250 56 40 61.2 74.8 110 @ 1 A 0.5 100 250 @ 1 kHz 65 1.5 ≤20 AMLV13V18C3100 18 14 22.95 28.05 42 @ 2.5 A 1.6 500 3100 @ 1 kHz 27.5 3 ≤20 AMLV13V26C1500 26 20 29.7 36.3 54 @ 2.5 A 1.9 400 1500 @ 1 kHz 27 3 ≤20 AMLV13V31C1200 31 25 35.1 42.9 65 @ 2.5 A 1.7 300 1200 @ 1 kHz 29 3 ≤20 AMLV13V34C1100 34 26 42.3 51.7 75 @ 2.5 A 2.3 300 1100 @ 1 kHz 50 3 ≤20 AMLV13V45C600 45 35 50.4 61.6 90 @ 2.5 A 2.0 250 600 @ 1 kHz 60 1.5 ≤20 AMLV18V16C4500 16 12 21.6 26.4 40 @ 5 A 2.4 800 4500 @ 1 kHz 24.5 6 ≤20 AMLV18V26C3200 26 20 29.7 36.3 54 @ 5 A 3.0 800 3200 @ 1 kHz 30 6 ≤20 AMLV18V30C1700 30 23 35 43.0 77 @ 5 A 3.8 600 1700 @ 1 kHz 45 6 ≤20 AMLV22V16C20000 16 12 21.6 26.4 42 @ 10 A 10 1200 20000 @ 1 kHz 24.5 25 ≤20 AMLV22V34C6500 34 26 42.3 51.7 77 @ 10 A 12 1200 6500 @ 1 kHz 50 12 ≤20 AMLV22V38C3000 38 30 42.3 51.7 77 @ 10 A 12 1000 3000 @ 1 kHz 50 12 ≤20 2 www.eaton.com/electronics Technical Data ELX1078 AMLV Automotive grade multilayer varistor Effective August 2021  Construction Component Material 1. Ceramic chip Metal oxides 2. Electrode Ag-Ni-Sn Dimensions—mm Pad layout Part size L W T (maximum) D A B C E AMLV04 1.00±0.15 0.50±0.10 0.6 0.20±0.10 1.7 0.6 0.5 0.6 AMLV06 1.60±0.15 0.80±0.15 0.95 0.35±0.15 2.8 1 0.8 1 AMLV08 2.00±0.20 1.25±0.20 1 0.40±0.20 3.4 1.4 1 1.2 AMLV12 3.20±0.30 1.60±0.20 1.5 0.50±0.20 4.5 1.8 2.1 1.2 AMLV13 3.20±0.30 2.50±0.25 1.5 0.50±0.20 4.5 2.8 2.1 1.2 AMLV18 4.50±0.40 3.20±0.30 2 0.60±0.30 6 3.6 3 1.5 AMLV22 5.70±0.40 5.00±0.30 2.5 0.60±0.30 7.2 5.5 4.2 1.5 www.eaton.com/electronics 3 AMLV Automotive grade multilayer varistor  Technical Data ELX1078 Effective Augst 2021 General specifications Operating temperature - 55 °C to +125 °C (without derating) Storage temperature (component) - 55 °C to +150 °C High temperature exposure MIL-STD-202 Method 108, Temperature: +150 °C +3/-0 °C, Duration 1000 hours unpowered Temperature cycling JESD22 Method JA-104, Temperature: -55 °C to +125 °C. Maximum transfer time 60 s, dwell time 30 min (air-air), Number of cycles: 1000 cycles MIL-STD-202 Method 106, Duration of 1 cycle 24 hours, Number of cycles: 10 unpowered Moisture resistance Biased humidity MIL-STD-202 Method 103, Temperature: +85 °C, Humidity: 85%, Duration: 1000 hours, Bias at working voltage Vdc Operational life MIL-STD-202 Method 108, Temperature: +125 °C, Duration: 1000 hours, Bias at working voltage Vdc Resistance to solvent MIL-STD-202 Method 215, Solvent 1: 1 part (by volume) of isopropyl alcohol, 3 parts (by volume) of mineral spirits Mechanical shock MIL-STD-202 Method 213, Test condition F Peak value: 1500 g’s, Half sin waveform, normal duration 0.5 ms, In 3 directions perpendicularly intersecting each other (total 18 times) Vibration MIL-STD-202 Method 204, Acceleration: 5 g’s Sweep time: 20 minutes, Frequency range: 10 to 2000 Hz, 3 x 12 cycles Resistance to soldering heat MIL-STD-202 Method 210, Condition B, no pre-heat of samples. Temperature: +260 ± 5 °C, time: 10 ± 1 s. Immersion and emersion rate: 25 mm/s ± 6 mm/s, 1 cycle Thermal shock MIL-STD-202 Method 107, Temperature: -55 °C + 0/-3 °C to +125 °C + 3/-0 °C max., transfer time: 20 s, Dwell time: 15 minutes, air to air Number of cycles: 300 cycles ESD AEC-Q200-002, Discharge capacitance: 150 pF Charging voltage: 30 kV min, Contact discharge, 1 pulse each polarity Solderability IEC60068-2-58, J-STD-002, a) 4 hours @ +155 °C dry heat, dip @ +245 ± 5 °C, 3 ± 0.3 s b) Steam aging 8 hours ± 15 minutes @ +93 ± 3 °C, dip @ +260 ± 5 °C, 7 ± 0.5 s, 95% of termination wetted Board flex AEC-Q200-005, Bend the board: 2 mm (min.), Duration of the applied forces: 60 + 5/-0 S No visible damage Electrical transient conduction ISO7637-2, Test pulses 5a 4 www.eaton.com/electronics AMLV Automotive grade multilayer varistor Technical Data ELX1078 Effective August 2021  Maximum surge current derating curves www.eaton.com/electronics 5 Technical Data ELX1078 Effective Augst 2021 Maximum surge current derating curves 6 www.eaton.com/electronics AMLV Automotive grade multilayer varistor  AMLV Automotive grade multilayer varistor Technical Data ELX1078 Effective August 2021  Maximum surge current derating curves www.eaton.com/electronics 7 Technical Data ELX1078 Effective Augst 2021 Maximum surge current derating curves 8 www.eaton.com/electronics AMLV Automotive grade multilayer varistor  AMLV Automotive grade multilayer varistor Technical Data ELX1078 Effective August 2021  Maximum surge current derating curves www.eaton.com/electronics 9 Technical Data ELX1078 Effective Augst 2021 Maximum leakage current and maximum clamping voltage curves 10 www.eaton.com/electronics AMLV Automotive grade multilayer varistor  AMLV Automotive grade multilayer varistor Technical Data ELX1078 Effective August 2021  Maximum leakage current and maximum clamping voltage curves www.eaton.com/electronics 11 Technical Data ELX1078 Effective Augst 2021 AMLV Automotive grade multilayer varistor  Power derating curve Packaging information - mm AMLV04: 10,000 parts on a 7” diameter tape and reel (EIA-481 compliant) 12 www.eaton.com/electronics Dimension AMLV04 AO 0.62 ± 0.05 BO 1.12 ± 0.12 W 8 ± 0.2 E 1.75 ± 0.1 F 3.5 ± 0.05 P0 4 ± 0.1 P1 2 ± 0.1 P2 2 ± 0.05 D0 1.55 ± 0.1 K0 0.60 ± 0.1 Technical Data ELX1078 AMLV Automotive grade multilayer varistor Effective August 2021  Packaging information - mm AMLV06: 4,000 parts on a 7” diameter tape and reel (EIA-481 compliant) AMLV08: 3,500 parts on a 7” diameter tape and reel (EIA-481 compliant) Dimension AMLV06 AMLV08 AO 1.1 ± 0.2 1.5 ± 0.2 BO 1.9 ± 0.2 2.3 ± 0.2 W 8 ± 0.2 8 ± 0.2 E 1.75 ± 0.1 1.75 ± 0.1 F 3.5 ± 0.05 3.5 ± 0.05 P0 4 ± 0.1 4 ± 0.1 P1 4 ± 0.1 4 ± 0.1 P2 2 ± 0.05 2 ± 0.05 D0 1.55 ± 0.1 1.55 ± 0.1 K0 0.95 ± 0.1 1.00 ± 0.1 AMLV12 and AMLV13: 2500 parts on a 7” diameter tape and reel (EIA-481 compliant) AMLV18: 1000 part on a 7” diameter tape and reel (EIA-481 compliant) AMLV22: 800 part on a 7” diameter tape and reel (EIA-481 compliant) Dimension AMLV12 AMLV13 AMLV18 AMLV22 AO 1.85 ± 0.2 2.75 ± 0.2 3.65 ± 0.2 5.50 ± 0.2 BO 3.45 ± 0.2 3.55 ± 0.2 4.96 ± 0.2 6.25 ± 0.2 W 8 ± 0.2 8 ± 0.2 12 ± 0.3 12 ± 0.3 E 1.75 ± 0.1 1.75 ± 0.1 1.75 ± 0.1 1.75 ± 0.1 F 3.5 ± 0.05 3.5 ± 0.05 5.5 ± 0.05 5.5 ± 0.05 P0 4 ± 0.1 4 ± 0.1 4 ± 0.1 4 ± 0.1 P1 4 ± 0.1 4 ± 0.1 8 ± 0.1 8 ± 0.1 P2 2 ± 0.05 2 ± 0.05 2 ± 0.05 2 ± 0.05 D0 1.55 ± 0.1 1.55 ± 0.1 1.55 ± 0.1 1.55 ± 0.1 D1 1.00 ± 0.1 1.00 ± 0.1 1.50 ± 0.1 1.50 ± 0.1 T 0.25 ± 0.1 0.25 ± 0.1 0.25 ± 0.1 0.25 ± 0.1 www.eaton.com/electronics 13 AMLV Automotive grade multilayer varistor  Technical Data ELX1078 Effective August 2021 Solder reflow profile TP TC -5°C tP Max. Ramp Up Rate = 3°C/s Max. Ramp Down Rate = 6°C/s Temperature TL Preheat A T smax Package thickness Volume mm3