V100MT4B

Metal-Oxide Varistors (MOVs) Axial Lead / Application Specific Varistors > MA Series MA Varistor Series RoHS Description The MA Series of transient surge suppressors are axial lead Metal Oxide Varistors (MOVs) for use in a wide variety of board level industrial and commercial electronic equipment. They are intended to protect components and signal/data lines from low energy transients where the small axial lead package is required. The MA Series is offered with standard ('S' suffix) or tightened ('B' suffix) clamping voltage. See MA Series Device Ratings and Specifications Table for part number and brand information. Agency Approvals Features Agency Agency File Number • Lead–free, HalogenFree and RoHS None compliant. • 3mm diameter disc size Additional Information Datasheet Resources • Small axial lead package Samples • Wide operating voltage range: VM(AC)RMS 9V to 264V VM(DC) 13V to 365V • Available in tape and reel or bulk packaging • No derating up to 85ºC ambient • New black epoxy offers improved performance for high temperature Lead-free wave soldering process. Absolute Maximum Ratings • For ratings of individual members of a series, see Device Ratings and Specifications chart Continuous MA Series Units Steady State Applied Voltage: AC Voltage Range (VM(AC)RMS) 9 to 264 V DC Voltage Range (VM(DC)) 13 to 365 V 40 to 100 A Transient: Peak Pulse Current (ITM) For 8/20µs Current Wave(See Figure 2) Single-Pulse Energy Range For 2ms Current Square Wave (WTM) 0.06 to 1.7 J Operating Ambient Temperature Range (TA) -55 to +85 °C Storage Temperature Range (TSTG) -55 to +125 °C MA Series MA Series Ratings & Specifications Maximum Rating (85°C) Continuous Part Number Brand (mm) Specifications (25°C) Transient Peak Current (8/20µs) Varistor Voltage at 1mA DC Test Current Max Clamping Volt VC at 2.0A (8/20µs) Typical Capacitance VRMS VDC Energy (10/1000µs) VM(AC) VM(DC) WTM ITM Min VN(DC) Max VC f = 1MHz (V) (V) (J) (A) (V) (V) (V) (A) (pF) V18MA1A V18MA1B V18MA1S 18A 18B 18S 9 10 10 13 14 14 0.06 0.07 0.06 40 40 40 14 15 15 18 18 18 23 21 21 49 44 49 550 550 550 V22MA1A V22MA1B V22MA1S 22A 22B 22S 10 14 14 15 18 18 0.09 0.10 0.09 40 40 40 16 19 19 22 22 22 28 26 26 55 51 55 410 410 410 V27MA1A V27MA1B V27MA1S 27A 27B 27S 13 17 17 19 22 22 0.10 0.11 0.10 40 40 40 21 24 24 27 27 27 34 31 31 67 59 67 370 370 370 V33MA1A V33MA1B V33MA1S 33A 33B 33S 18 20 20 23 26 26 0.13 0.15 0.14 40 40 40 26 29.5 29.5 33 33 33 40 36.5 36.5 73 67 73 300 300 300 V39MA2A V39MA2B V39MA2S 39A 39B 39S 22 25 25 28 31 31 0.16 0.18 0.17 40 40 40 31 35 35 39 39 39 47 43 43 86 79 86 250 250 250 V47MA2A V47MA2B V47MA2S 47A 47B 47S 27 30 30 34 38 38 0.19 0.21 0.19 40 40 40 37 42 42 47 47 47 57 52 52 99 90 99 210 210 210 V56MA2A V56MA2B V56MA2S 56A 56B 56S 32 35 35 40 45 45 0.23 0.25 0.23 40 40 40 44 50 50 56 56 56 68 62 62 117 108 117 180 180 180 V68MA3A V68MA3B V68MA3S 68A 68B 68S 38 40 40 48 56 56 0.26 0.30 0.27 40 40 40 54 61 61 68 68 68 82 75 75 138 127 138 150 150 150 V82MA3A V82MA3B V82MA3S 82A 82B 82S 45 50 50 60 66 66 0.33 0.37 0.34 40 40 40 65 73 73 82 82 82 99 91 91 163 150 163 120 120 120 V100MA4A V100MA4B V100MA4S 100 101 102 57 60 60 72 81 81 0.40 0.45 0.42 40 40 40 80 90 90 100 100 100 120 110 110 200 185 200 100 100 100 V120MA1A V120MA2B V120MA2S 120 121 122 72 75 75 97 101 101 0.40 0.50 0.46 100 100 100 102 108 108 120 120 120 138 132 132 220 205 220 40 40 40 V150MA1A V150MA2B 150 151 88 92 121 127 0.50 0.60 100 100 127 135 150 150 173 165 255 240 32 32 V180MA1A V180MA3B 180 181 105 110 144 152 0.60 0.70 100 100 153 162 180 180 207 198 310 290 27 27 V220MA2A V220MA4B 220 221 132 138 181 191 0.80 0.90 100 100 187 198 220 220 253 242 380 360 21 21 V270MA2A V270MA4B 270 271 163 171 224 235 0.90 1.00 100 100 229 243 270 270 311 297 460 440 17 17 V330MA2A V330MA5B 330 331 188 200 257 274 1.00 1.10 100 100 280 297 330 330 380 363 570 540 14 14 V390MA3A V390MA6B 390 391 234 242 322 334 1.20 1.30 100 100 331 351 390 390 449 429 670 640 12 12 V430MA3A V430MA7B 430 431 253 264 349 365 1.50 1.70 100 100 365 387 430 430 495 473 740 700 11 11 NOTE: Average power dissipation of transients not to exceed 200mW. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17 Metal-Oxide Varistors (MOVs) Axial Lead / Application Specific Varistors > MA Series Power Dissipation Ratings Peak Pulse Current Test Waveform PERCENT OF PEAK VALUE PERCENT OF RATED VALUE 100 90 80 70 60 50 40 30 20 100 O1 = Virtu T = Time T1 = Virtu T2 = Virtu 90 50 Example: F 8 s = T1 = 20 s = T2 = 10 O1 10 T T1 0 -55 50 60 Figure 1 70 80 90 100 110 120 130 140 150 AMBIENT TEMPERATURE ( oC) FIGURE 1. CURRENT, AND POWER Should transients occur inENERGY rapid succession, the DERATING average power CURVE dissipation required is simply the energy (watt-seconds) per pulse times the number of pulses per second. The power so developed must be within the specifications shown on the Device Ratings and Specifications table for the specific device. Furthermore, the operating values need to be derated at high temperatures as shown above. Because varistors can only dissipate a relatively small amount of average power they are, therefore, not suitable for repetitive applications that involve substantial amounts of average power dissipation. TIME T2 Figure 2 FIGURE 2. PEAK PULSE CURRENT TEST 01 = Virtual Origin of Wave T = Time from 10% to 90% of Peak T1 = Rise Time = 1.25 x T T2 = Decay Time Example - For an 8/20 µs Current Waveform: 8µs = T1 = Rise Time 20µs = T2 = Decay Time Repetitive Surge Capability V18MA - V100MA SURGE CURRENT (A) 5 2 DISC SIZE 3mm V18MA1A - V100MA4B 2 20 10 100 1 10 10 3 10 4 1 0.5 0.2 0.1 20 Figure 3 10 10 3 10 4 10 5 10 6 10 2 5 2 1 0.5 INDEFINITE DISC SIZE 3mm V120MA1A - V430MA7B 1 10 20 10 5 10 6 10 2 2 50 SURGE CURRENT (A) 50 V120MA1A/S - V430MA3A INDEFINITE 0.2 0.1 100 1,000 IMPULSE DURATION (μs) 10,000 FIGURE 7. SURGE CURRENT RATING CURVES FOR V18MA SERIES - V100MA SERIES © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17 20 100 1,000 IMPULSE DURATION (μs) 10,000 Figure 4 FIGURE 8. SURGE CURRENT RATING CURVES FOR V120MA SERIES - V430MA SERIES NOTE: If pulse ratings are exceeded, a shift of VN(DC) (at specified current) of more than +/-10% could result. This type of shift, which normally results in a decrease of VN(DC), may result in the device not meeting the original published specifications, but it does not prevent the device from continuing to function, and to provide ample protection. MAXIMUM PEAK VOLT MAXIMUM PEAK VOLT Axial Lead / Application Specific Varistors > MA Series 80 100 60 V47MA2A/S V39MA2A/S V33MA1A/S V27MA1A/S V22MA1A/S V18MA1A/S 40 30 20 10 -2 Maximum Clamping Voltage 200 150 100 80 60 40 200 150 100 80 60 40 30 30 20 10 -2 10 -1 20 10 -2 2,000 Figure 5 V47MA2A/S V47MA2A/S V39MA2A/S V39MA2A/S V33MA1A/S V33MA1A/S V27MA1A/S V27MA1A/S V22MA1A/S V22MA1A/S V18MA1A/S V18MA1A/S 10 -1 10 0 10 1 10 2 10 0 PEAK AMPERES 10 1 10 2 (A) PEAK AMPERES (A) 1,500 1,000 800 600 400 200 30 100 20 10 -2 10 -3 -1 10 100 10 -2 Figure 6 V56MA2B V47MA2B V39MA2B V33MA1B V180MA1A V27MA1B V150MA1A V180MA1A V22MA1B V120MA1A/S V150MA1A V18MA1B V120MA1A/S 10 -1 -1 10 0 10 1 10 -2 10 10 0 1 10 1 10 2 0 10 10 10 2 PEAK AMPERES (A) PEAK AMPERES (A) PEAK AMPERES (A) 600 100 90 400 80 70 60 50 200 40 30 100 2010 -2 10 -3 10 2 Figure 7 100 90 80 70 60 50 40 V56MA2B V47MA2B V56MA2B V39MA2B V47MA2B V39MA2B V33MA1B V27MA1B V33MA1B 30 V180MA1A V22MA1B V27MA1B V150MA1A V18MA1B V22MA1B V120MA1A/S V18MA1B 20 -3 0 10 -2 10 0 10 -1 1010 1010 10 1 10 2 10 2 -1 1 -2 -1 0 10 10PEAK AMPERES 10 PEAK(A) 10 1 10 2 10 3 AMPERES (A) PEAK AMPERES (A) 3,000 MAXIMUM PEAK VOLTS (V) 800 V100MA4B V82MA3B V68MA3B 2,000 1,000 900 800 700 600 500 400 300 1,000 900 800 700 600 500 400 300 200 100 10 -3 10 -2 Figure 8 10 -2 10 -1 10 0 10 1 1 10 -1 10 0 PEAK 10AMPERES 10 2(A) PEAK AMPERES (A) 10 3 10 2 10 3 FIGURE 5. VOLTAGE CLAMPING VOLTAGE FOR V18MA1B - V100MA4B FIGURE 6. CLAMPING VOLTAGE FOR V120MA2B - V430MA7B FI GURE 4. CLAMPING FOR V120MA1A/S FIGURE 5. CLAMPING VOLTAGE FOR V18MA1B - V100MA4B FIGURE 6. CLAMPING VOLTAGE FOR V120MA2B - V430MA7B V430MA3A 0MA4A/S Wave Solder Profile 4,000 0MA4B MA3B MA3B MAXIMUM PEAK VOLTS (V) MAXIMUM CLAMPING VOLTAGE Non Lead–free Profile DISC SIZE 3mm 3,000 2,000 Lead–free Profile 120 TO 430VN(DC) RATING TA = -55o C TO 85o C 300 A2B 2B B 10 3 0MA4B Maximum Wave 260C V430MA7B Maximum WaveV390MA6B 240C 1,000 250900 800 700 600 200500 400 300 250 V330MA5B V270MA4B V220MA4B V180MA3B V150MA2B V120MA2B 150 TEMPERATURE (ºC) TEMPERATURE (ºC) 300 200 100 100 50 10 -3 10 -2 10 -1 10 0 10 1 PEAK AMPERES (A) 10 2 0 FIGURE 6. CLAMPING VOLTAGE FOR V120MA2B - V430MA7B 0 0.5 1 1.5 2 2.5 3 3.5 Figure 9 TIME(MINUTES) 200 150 100 50 10 3 0 4 0 Figure 10 0.5 1 1.5 2 2.5 3 3.5 10 -1 2,000 MAXIMUM CLA DISC SIZE 3mm 120 TO 430VN(D TA = -55o C TO 1,000 900 800 700 600 500 400 300 200 10 -2 FIGURE 6. CLAMPING V 200 10 3 100 10 -3 200 100 10 -3 10 2 10 3 V430MA7B V390MA6B V330MA5B V270MA4B V220MA4B V180MA3B V150MA2B V120MA2B V430MA7B V390MA6B V330MA5B V270MA4B V220MA4B V180MA3B V150MA2B V120MA2B 400 3,000 4,000 MAXIMUM CLAMPING VOLTAGE DISC SIZE 3mm 3,000 CLAMPING MAXIMUM VOLTAGE 120 TO 430VN(DC) RATING DISC SIZE 3mm 120 TO 430VN(DC) 2,000 TA =RATING -55o C TO 85o C TA = -55o C TO 85o C 4,000 MAXIMUM PEAK VOLTS (V) 200 1,000 MAXIMUM PEAK VOLTS (V) MAXIMUM PEAK VOLTS MAXIMUM PEAK VOLTS (V)(V) 300 1,500 600 MAX CLAMPING VOLTAGE MAX CLAMPING VOLTAGE 500 DISC SIZE 3mm V430MA3A DISCCLAMPING SIZE 3mm MAX VOLTAGE 400 18 TORATING 100V N(DC) RATING 120 TO 430V V390MA3A DISC SIZE 3mm N(DC) o C TOT85RATING o -55o C TO 85o C V330MA2A 18 100V TATO = -55 300 A =C N(DC) V100MA4B o o V270MA2A TA = -55 C TO 85 C V82MA3B V220MA2A V68MA3B 200 600 4,000 FIGURE 3. CLAMPING VOLTAGE FOR V18MA1A/S - V100MA4A/S FI GURE 4. CLAMPING VOLTAGE FOR V120MA1A/S 5. CLAMPING VOLTAGE FOR V18MA1B - V100MA4B FIGURE 3. CLAMPING VOLTAGE FOR V18MA1A/S - V100MA4A/S FI GURE 4. FIGURE CLAMPING VOLTAGE FOR V120MA1A/S V430MA3A V430MA3A V120MA1A/S - V430MA3A V120MA2B - V430MA7B 4,000 600 500 400 2,000 800 FI GURE 4. CLAMPIN V430MA3 800 600 100 90 400 80 70 60 50 200 40 1,000 100 10 -2 10 2 MAXIMUM PEAK VOLTS (V) 300 MAXIMUM PEAK VOLTS (V)(V) MAXIMUM PEAK VOLTS MAXIMUM PEAK VOLTS (V) MAXIMUM PEAK VOLTS (V) 400 10 1 4,000 MAX CLAMPING VOLTAGE 600 V430MA3A MAX CLAMPING DISC SIZE 3mmVOLTAGE MAX 500 CLAMPING VOLTAGE DISC 3mm 120 SIZE TO 430V RATING V390MA3A V430MA3A DISC400 SIZE 3mm N(DC) oC 100V RATING 2,000 V330MA2A TTO -55oN(DC) C TO 85 120 TO 430V18 V390MA3A A =RATING N(DC) V100MA4B o C TO 85o C o o T = -55 V270MA2A 300 V330MA2A TA = -55 C TOA85 C V82MA3B 1,500 V220MA2A V270MA2A V68MA3B V220MA2A 200 1,000 4,000 MAXIMUM PEAK VOLTS (V) 600 10 0 PEAK AMPERES (A) V18MA1B - V100MA4B 800 MAX CLAMPING VOLTAGE V100MA4A/S DISC SIZE 3mm V100MA4A/S MAX CLAMPING VOLTAGE V82MA3A/S 600 3mm 18 TO 100V N(DC) RATING DISC SIZE V68MA3A/S V82MA3A/S TA RATING = -55o C TO 85o C V68MA3A/S 18 TO 100V 400 N(DC) V56MA2A/S TA = -55o C TO 85o C V56MA2A/S 300 800 10 -1 FIGURE 3. CLAMPING VOLTAGE FOR V18MA1A/S - V100MA4A/S V18MA1A/S - V100MA4A/S MA2A/S A2A/S A/S S 2 200 Metal-Oxide Varistors150(MOVs) 4 TIME(MINUTES) © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17 Metal-Oxide Varistors (MOVs) Axial Lead / Application Specific Varistors > MA Series Physical Specifications Product Dimensions L L D (diameter) b (diameter) H Inches Symbol Millimeters Min Max Min Max 0.66 Øb 0.024 0.026 0.61 ØD 0.118 0.177 3.0 H 0.177 0.276 øD 1.740 1.220 H L L b (diameter) øb 4.5 L 27 D.3 (diameter) 4.5 7.0 31.0 TypicalHWeight = 0.5g L        G L Lead Material Tin–plated Copper clad steel Soldering Characteristics Solderability per MIL–STD–202, Method 208 Insulating Material Cured, flame retardant epoxy polymer meets UL94V–0 requirements Device Labeling Marked with LF, voltage and date code Environmental Specifications Operating/Storage Temperature -40°C to +85°C Passive Aging +85°C, 1000 hours +/-10% typical voltage change Humidity Aging +85°C, 85% RH, 1000 hours +/-10% typical voltage change Thermal Shock +85°C to -40°C 5 times +/-10% typical voltage change Solvent Resistance MIL–STD–202, Method 215 Moisture Sensitivity Level 1, J-STD-020 Tape and Reel Dimensions H1 = H2 +/- 0.040” H1 0.063” max H2 0.200” +/- 0.02 Part Numbering System 0.080” max 0.240”+/- 0.040 V XXX MA XX VARISTOR 2.062”+/- 0.059 ENERGY/CLAMPING VOLTAGE VARIANT 2.681” max VARISTOR VOLTAGE (VN at 1mA) Conforms to EIA Standard RS-296-E H1 = H2 0.063 MAX SERIES DESIGNATOR MA: Bulk Pack MT: Tape and Reel 0.040 H1 0.063 MAX H2 0.0980.177 0.1350.145 0.020.023 0.200 0.020 0.1180.236 0.080 MAX Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. 0.240 0.040 2.062 0.059 © 2017 Littelfuse, Inc. 2.681 Specifications are subject to change without notice. MAX Revised: 09/14/17 • Conf orms to EIA Standard RS-296E 0.240 0.040