V60MLA0805A

Varistor Products Surface Mount Multilayer Varistors (MLVs) > MLA Series RoHS MLA Varistor Series Description The wide operating voltage and energy range make the MLA Series suitable for numerous applications on power supply, control and signal lines. Size Table Metric EIA 1005 0402 1608  2012 0805  1206  1210 The MLA Series is manufactured from semiconducting ceramics, and is supplied in a leadless, surface mount package. The MLA Series is compatible with modern reflow and wave soldering procedures. It can operate over a wider temperature range than Zener diodes, and has a much smaller footprint than plastichoused components. Applications t
4VQQSFTTJPO
PG
JOEVDUJWF
switching or other transient events such as EFT and surge voltage at the circuit board level t
&4%
QSPUFDUJPO
GPS
*&$
61000-4-2, MIL-STDD
NFUIPE

and other industry specifications (see also the MLE or MLN Series) t
6TFE
UP
IFMQ
BDIJFWF
electromagnetic compliance of end products t
3FQMBDF
MBSHFS
TVSGBDF
mount TVS Zeners in many applications Littelfuse Inc. manufactures other multilayer series products. See the MLE Series data sheet for ESD applications, MHS Series data sheet for high-speed ESD applications, the MLN Series for multiline protection and the AUML Series for automotive applications. Features t
"&$

2
DPNQMJBOU t
RoHS compliant t
-FBEMFTT


0805, 1206 and 1210 chip sizes t
.VMUJMBZFS
DFSBNJD
construction technology t
1SPWJEFT
POCPBSE
transient voltage protection for ICS and transistors t
¡$
UP
¡$
operating temp. range t
0QFSBUJOH
WPMUBHF
SBOHF
VM(DC) = 5.5V to 120V t

3BUFE
GPS
TVSHF
current (8 x 20μs) t
3BUFE
GPS
FOFSHZ
(10 x 1000μs) t

*OIFSFOU
CJEJSFDUJPOBM
clamping t
/P
QMBTUJD
PS
FQPYZ
packaging assures better than UL94V-0 flammability rating t
4UBOEBSE
MPX
DBQBDJUBODF
types available Absolute Maximum Ratings For ratings of individual members of a series, see device ratings and specifications table. Continuous Steady State Applied Voltage: DC Voltage Range (VM(DC)) AC Voltage Range (VM(AC)RMS) Transient: Non-Repetitive Surge Current, 8/20μs Waveform, (ITM) Non-Repetitive Surge Energy, 10/1000μs Waveform, (WTM) 0QFSBUJOH
"NCJFOU
5FNQFSBUVSF
3BOHF
5A) Storage Temperature Range (TSTG) Temperature Coefficient (DV) of Clamping Voltage (VC) at Specified Test Current ©2010 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/ML.html of MLA.html for current information. ML Series Units 
UP
 
UP
 V V 4 to 500 0.02 to 2.5 
UP
 
UP
 A J ºC ºC MLA Series Device Ratings and Specifications Part Number 7.-"/5 7.-"/ 7.-"-/ 7.-"/ V5.5MLA0402N V5.5MLA0402LN 7.-"/5 7.-"-/4 V5.5MLA0805N V5.5MLA0805LN V5.5MLA1206N V9MLA0402N V9MLA0402LN 7.-"/5 7.-"-/4 V9MLA0805LN V12MLA0805LN V14MLA0402N 7.-"/ V14MLA0805N V14MLA0805LN V14MLA1206N V18MLA0402N 7.-"/ V18MLA0805N V18MLA0805LN V18MLA1206N V18MLA1210N 7.-"/ V26MLA0805N V26MLA0805LN V26MLA1206N V26MLA1210N 7.-"/ 7.-"-/ 7.-"/ 7.-"-/ 7.-"/ V42MLA1206N V48MLA1206N V48MLA1210N V48MLA1210LN V56MLA1206N V60MLA1210N V68MLA1206N V85MLA1210N V120MLA1210N Maximum Ratings (125º C) Specifications (25ºC) Maximum Maximum Non- Maximum Non- Maximum Clamping Nominal Voltage Typical Continuous repetitive Surge repetitive Surge Voltage at 1A (or as at 1mA DC Test Capacitance Working Voltage Current (8/20μs) Energy (10/1000μs) Noted) (8/20μs) Current at f = 1MHz VN(DC) VN(DC) VM(DC) VM(AC) ITM WTM VC C Min Max (V) (V) (A) (J) (V) (V) (V) (pF)  2.5  0.100      2.5 120       2.5 40 0.100      2.5 100     6000 5.5 4.0 20 0.050 21.0  10.8 220 5.5 4.0 20 0.050  15.9 21.5  5.5 4.0  0.100    500 5.5 4.0  0.100    450 5.5 4.0 120     1840 5.5 4.0 40 0.100    400 5.5 4.0 150 0.400     9.0 6.5 20 0.050  11.0 16.0 120 9.0 6.5 4 0.020  11.0 16.0  9.0 6.5  0.100 25.5 11.0 16.0 490 9.0 6.5  0.100 25.5 11.0 16.0  9.0 6.5 40 0.100 25.5 11.0 16.0 520 12.0 9.0 40 0.100 29.0 14.0 18.5 410 14.0 10.0 20 0.050  15.9 21.5  14.0 10.0  0.100  15.9 21.5 180 14.0 10.0 120   15.9  560 14.0 10.0 40 0.100  15.9   14.0 10.0 150 0.400  15.9  1400 18.0 14.0 20 0.050 50.0 22.0 28.0 40 18.0 14.0  0.100 50.0 22.0 28.0 120 18.0 14.0 120  44.0 22.0 28.0 520 18.0 14.0 40 0.100 44.0 22.0 28.0 290 18.0 14.0 150 0.400 44.0 22.0 28.0  18.0 14.0 500 2.500 44.0 at 2.5 22.0 28.0 1440 26.0 20.0  0.100 60.0   110 26.0 20.0 100  60.0 29.5  220 26.0 20.0 40 0.100 60.0 29.5  140 26.0 20.0 150 0.600 60.0 29.5  600 26.0 20.0  1.200 60.0 at 2.5 29.5  1040  25.0  0.100   46.0 90  25.0  0.100   46.0 90  25.0 280 1.200 68.0 at 2.5   1820  25.0 220 0.900 68.0 at 2.5     26.0 180 0.800   49.0 500 42.0  180 0.800 92.0 46.0 60.0 425 48.0 40.0 180 0.900 100 54.5 66.5  48.0 40.0 250 1.200 105.0 at 2.5 54.5 66.5 520 48.0 40.0 220 0.900 105.0 at 2.5 54.5 66.5 500 56.0 40.0 180 1.000 120.0 61.0  180 60.0 50.0 250 1.500 
BU
   440 68.0 50.0 180 1.000 140.0  90.0 100 85.0  250 2.500 180.0 at 2.5 95.0 115.0 260 120.0  125 2.000 260.0 at 2.5  165.0 80 /05&4
1 'L' suffix is a low capacitance and energy version; Contact your Littelfuse sales representative for custom capacitance requirements 2 Typical leakage at 25ºC MLA Series Product Dimensions (mm) 1"%
-":065
%*.&/4*0/4 $)*1
-":065
%*.&/4*0/4 C E B NOTE D L W A 1210 Size Dimension 1206 Size IN MM IN MM A 0.160 B 0.100 4.06 0.160 2.54 0.065 C 0.040 1.02 0.040 0805 Size 0603 Size IN MM 4.06 0.120 1.65 0.050 1.02 0.040 0402 Size IN MM IN MM  0.100 2.54      0.020 0.51 1.02  0.89 0.024 0.61 D (max.)    1.80  1.10 0.040 1.00 0.024 0.60 E 0.020  0.50  0.020  0.50  

0.010 

0.25 0.015  0.4  0.010  0.25  L 0.125  
 0.125  
 
 2.01  
 1.6  
 1.00  W 0.100  2.54  0.060  1.60  0.049  1.25  
 0.8  0.020  0.50  Part Numbering System V 18 MLA 1206 X X X PACKING OPTIONS (see Packaging table for quantities) T: 13in (330mm) Diameter Reel, Plastic Carrier Tape H: 7in (178mm) Diameter Reel, Plastic Carrier Tape R: 7in (178mm) Diameter Reel, Paper Carrier Tape A: Bulk Pack DEVICE FAMILY Littelfuse TVSS Device MAXIMUM DC WORKING VOLTAGE END TERMINATION OPTION No Letter: Standard N: Nickel Barrier Option (Matte Tin outer surface, plated on Nickel underlayer plated on silver base metal) CAPACITANCE OPTION No Letter: Standard L: Low Capacitance Version MULTILAYER SERIES DESIGNATOR DEVICE SIZE: 0201 = .024 inch x .012 inch (0.6 mm x 0.3 mm) 0402 = .04 inch x .02 inch (1.0 mm x 0.5 mm) 0603 = .063 inch x .031 inch (1.6 mm x 0.8 mm) 0805 = .08 inch x .08 inch (2.0 mm x 1.25 mm) 1206 = .126 inch x .063 inch (3.2 mm x 1.6 mm) 1210 = .126 inch x .1 inch (3.2 mm x 2.5 mm) /05&4 1 V120MLA1210 standard shipping quantities are 1000 pieces per reel for the "H" option and 4000 pieces per reel for "T" option. 
7
.-"
7.-"
BOE
7.-"
POMZ
BWBJMBCMF
JO
) 
5
BOE
"
QBDLJOH
PQUJPOT Packaging* Quantity Device Size 13” Inch Reel ("T" Option) 7” Inch Reel ("H" Option) 7” Inch Reel ("R" Option) Bulk Pack ("A" Option) 1210 1206 0805  0402 8,000 10,000 10,000 10,000 N/A 2,000 2,500 2,500 2,500 N/A N/A N/A N/A 4,000 10,000 2,000 2,500 2,500 2,500 N/A  1BDLBHJOH
*U
JT
SFDPNNFOEFE
UIBU
QBSUT
CF
LFQU
JO
UIF
TFBMFE
CBH
QSPWJEFE
BOE
UIBU
QBSUT
CF
VTFE
BT
TPPO
BT
QPTTJCMF
XIFO
SFNPWFE
GSPN
CBHT ©2010 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/ML.html of MLA.html for current information. MLA Varistor Series Revision: November 10, 2010 MLA Series /05&

"WPJE
NFUBM
SVOT
JO
UIJT
BSFB
QBSUT
OPU
SFDPNNFOEFE
GPS
VTF
JO
BQQMJDBUJPOT
VTJOH
Silver (Ag) epoxy paste. Varistor Products Surface Mount Multilayer Varistors (MLVs) > MLA Series Tape and Reel Specifications D0 PRODUCT IDENTIFYING LABEL P0 For T and H Pack Options: PLASTIC CARRIER TAPE For R Pack Options: EMBOSSED PAPER CARRIER TAPE P2 E F K0 W B0 t1 D1 P1 Symbol EMBOSSMENT TOP TAPE A0 8mm NOMINAL 178mm OR 330mm DIA. REEL Dimensions in Millimeters Description 0402 Size 0603, 0805, 1206 & 1210 Sizes A0 Width of Cavity Dependent on Chip Size to Minimize Rotation. B0 Length of Cavity Dependent on Chip Size to Minimize Rotation. Dependent on Chip Size to Minimize Rotation. K0 Depth of Cavity W Width of Tape 



F Distance Between Drive Hole Centers and Cavity Centers 





E Distance Between Drive Hole Centers and Tape Edge 





P1 Distance Between Cavity Centers  

P2 Axial Drive Distance Between Drive Hole Centers & Cavity Centers 





P0 Axial Drive Distance Between Drive Hole Centers D0 Drive Hole Diameter D1 %JBNFUFS
PG
$BWJUZ
1JFSDJOH T1 Top Tape Thickness 




 
 N/A 


0.1 Max 0.1 Max /05&4 t
$POGPSNT
UP
&*"
3FWJTJPO
" t
$BO
CF
TVQQMJFE
UP
*&$
QVCMJDBUJPO
 MLA Varistor Series Revision: November 10, 2010 ©2010 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/ML.html or MLA.html for current information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Littelfuse: V9MLA0402LNR V14MLA0805LWT V12MLA0805LWA V18MLA0805WA V18MLA1206NA V18MLA0805LT V18MLA0805NA V14MLA0603A V14MLA0805A V14MLA0805NA V18MLA0805NT V18MLA0805A V14MLA0402NH V26MLA0805LNA V120MLA1210WA V14MLA0603T V18MLA0805LA V18MLA0805T V18MLA0603NT V18MLA1206T V14MLA0603NT V18MLA0805LWH V14MLA0805NT V14MLA0603WA V18MLA1206A V14MLA0805LT V18MLA1210NA V14MLA0603NA V18MLA1210WA V14MLA0805LNT V18MLA1206NH V18MLA1210T V18MLA0805WH V18MLA1206WA V18MLA0805LNA V12MLA0805LNT V12MLA0805LNA V14MLA1206NA V18MLA0603NA V18MLA0603A V14MLA0805WA V18MLA0603WA V14MLA0805WT V14MLA0805LWA V14MLA1206WH V18MLA0805LNT V14MLA0805T V18MLA0805LWA V18MLA1210NT V120MLA1210NA V18MLA0603T V18MLA1210LA V3.5MLA0603A V5.5MLA0805T V14MLA0805LWH V14MLA1206WA V120MLA1210A V18MLA1206WH V18MLA1210LWA V30MLA1210LNH V48MLA1210WH V26MLA1210T V16MLA0603NH V18AUMLA1210T V60MLA0805H V14MLA0603NR V18MLA0603NR V26MLA0603NR V30MLA0603NR V30MLA1210LH V48MLA1210LH V9MLA0603LNR V30MLA1210NT V30MLA1210LT V48MLA1206NT V48MLA1206NA V60MLA1210T V9MLA1206LA V9MLA1206LH V60MLA0805A V30MLA1210NA