V70113S205QE

V Series Power & Line Voltage Select Slide Switches Features/Benefits • Ratings up to 10 AMPS • Snap-in panel and PC mounting • Actuators with screwdriver slot • Quick connect terminals available • RoHS compliant Typical Applications • Appliances Materials CONTACT RATING: 10 GPA @ 125 V AC 50/60 Hz T85; 5 GPA @ 250 V AC 50/60 Hz T85; 2 (0.5)A @ 250 VAC 50/60 Hz T85; 4RA @ 30 VDC T85 ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to +85ºC. HOUSING: 6/6 nylon (UL94V-2), black. TOP PLATE: 6/6 nylon (UL94V-2), black. ACTUATOR: Glass filled polyester (UL94V-0), ‘01 and 02’ styles, black (standard); ‘12, 13 and 14’ styles, red (standard). CONTACTS: Copper, silver plated. TERMINALS: Copper, silver plated. CONTACT SPRING: Music wire or stainless steel. TERMINAL SEAL: Epoxy. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I–34 through I–36. For additional options not shown in catalog, consult Customer Service Center. Switch Function V802 DPDT V701 SPST Actuator V702 SPDT 12 Screwdriver slot V801 DPST 01 .290” high 02 .290” high with markings 13 Screwdriver slot 14 Screwdriver slot with markings Mounting Style SS Panel with mounting ears MA Right angle, PC thru-hole MS PC Thru-hole S2 Snap-in panel SL Right angle, panel with mounting ears Terminations 05 Quick connect 02 PC thru-hole 08 Right angle PC thru-hole Contact Material Q Silver Seal NONE No seal E Epoxy seal Dimensions are shown: Inches (mm) Specifications and dimensions subject to change I–33 www.ckswitches.com I Slide Specifications V Series Power & Line Voltage Select Slide Switches SWITCH FUNCTION NO. POLES MODEL NO. SWITCH FUNCTION SCHEMATIC AVAILABLE MOUNTING STYLES V701 SPST ALL V702 SPDT ALL NO. POLES SP All models MODEL NO. SWITCH FUNCTION SCHEMATIC AVAILABLE MOUNTING STYLES V801 DPST ALL V802 DPDT ALL DP with all options. Contacts make on side actuator thrown. Slide I ACTUATOR 12 SCREWDRIVER SLOT WITH MARKING 01 Actuator color is red with white 115V-230V markings (std.). .290” HIGH 02  .290” HIGH WITH MARKINGS Actuator color is black. markings are reversed on V702 and V802 models. Actuator color is black with white markings (std.). 13  SCREWDRIVER SLOT NO MARKING Actuator color is red. 14  SCREWDRIVER SLOT WITH MARKINGS Markings are reversed on V702 and V802 models. Note: Orientation of Actuator color is red with actuator markings white markings (std.). and terminals. MOUNTING STYLE SS  PANEL WITH MOUNTING EARS PANEL MOUNTING V80212SS05Q AVAILABLE WITH: DPDT Models: All. Terminations: 02 and 05 MA  RIGHT ANGLE, PC THRU-HOLE AVAILABLE WITH: Models: All Terminations: 08 PC MOUNTING PC mount, side actuated. For mounting information, see TERMINATIONS section, page I-36. V80212MA08Q Horizontal Actuation DPDT Dimensions are shown: Inch (mm) Specifications and dimensions subject to change I–34 www.ckswitches.com V Series Power & Line Voltage Select Slide Switches MOUNTING STYLE MS  PC THRU-HOLE AVAILABLE WITH: All models with 02 terminations PC MOUNTING PC mount, top actuated. For mounting information, see TERMINATIONS section, page I-36. .175 (4,45) V80212MS02Q DPDT I Slide SL  RIGHT ANGLE PANEL WITH MOUNTING EARS PANEL MOUNTING AVAILABLE WITH: All models with 08 terminations V80213SL08Q Horizontal Actuation DPDT S2  SNAP-IN PANEL MOUNT PANEL MOUNTING .540 (13,72) .750 (19,05) .315 (8,00) .650 (16,50) .200 TYP. (5,08) .050 DIA. TYP. (1,30 ) .346 TYP. (8,80) 1.300 (33,02) ? ? .045 x .045 DEEP (1,14) x (1,14) ACTUATOR TOP FLUSH .245 (6,22) V80212S205Q Panel thickness: .080 (2,03) .110 x .032 TYP. (2,79) x (0,80) .315 (8,00) DPDT AVAILABLE WITH: All models with 02 & 05 terminations Dimensions are shown: Inches (mm) Specifications and dimensions subject to change I–35 www.ckswitches.com V Series Power & Line Voltage Select Slide Switches TERMINATIONS 05  QUICK CONNECT 02  PC THRU-HOLE 08  PC THRU-HOLE .175 (4,45) Fits .110 in. quick connector. Not available with ‘MS, SS or S2’ mounting styles. Slide I PC MOUNTING PC MOUNTING MS, SS Mounting Styles. MA, SL Mounting Styles. CONTACT MATERIAL OPTION CODE CONTACT MATERIAL Q SILVER 1 RATINGS POWER 10 GPA @ 125 V AC 50/60 Hz T85; 5 GPA @ 250 V AC 50/60 Hz T85; 2 (0.5)A @ 250 VAC 50/60 Hz T85; 4RA @ 30 VDC T85 * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 All models CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). with all options. NOTE: Any models supplied with Q contact material are RoHS compliant. SEAL NONE  NO SEAL E  EPOXY SEAL EPOXY .075 MAX. (1,91) Dimensions are shown: Inch (mm) Specifications and dimensions subject to change I–36 www.ckswitches.com