VLR175LF

PolySwitch® PTC Devices PRODUCT : VLR175LF DOCUMENT: SCD25533 PCN: D34121 REV LETTER: F REV DATE: July 26, 2016 PAGE NO.: 1 OF 2 Overcurrent Protection Device Specification Status: Released Maximum Electrical Rating Operating Voltage: 12Vdc Interrupt Current: 100A Chip Size: 3 X 12 mm Leads: Nickel 1/4H 0.125mm nominal thickness Tape: Polyester (White) 13mm nominal width Solder: Lead-free Marking: (Color: Green) Manufacturer's Mark R1X Part Identification Lot Identification TABLE I. DIMENSIONS: A B MIN MAX MIN MAX mm: 29.3 31.7 2.9 3.3 in*: (1.15) (1.25) (0.11) (0.13) *Rounded off approximation C MIN ---- D MAX 0.8 (0.03) MIN 5.2 (0.20) E MAX 6.8 (0.27) MIN 10.0 (0.39) F MAX 12.5 (0.49) MIN 2.4 (0.09) MAX 2.6 (0.10) TABLE II. PERFORMANCE RATINGS: As measured in Mueller Kelvin Clips Model BU-75K. I HOLD CURRENT TRIP LIMITS TIME TO TRIP REFERENC ONE-HOUR TRIPPEDE POST-TRIP STATE RESISTANC RESISTANCE POWER E DISSIPATION SECONDS OHMS OHMS AT 25°C, AT 25°C AT 25°C 8.75A HOLD HOLD TRIP HOLD TRIP HOLD TRIP HOLD TRIP MIN MAX MIN MAX MIN MAX 1.75 2.4 5.6 1.75 4.2 0.8 2.0 ------5 0.017 0.031 0.017 0.062 AMPS 25°C AMPS AT 0°C Agency Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: AMPS AT 25°C AMPS AT 60°C AMPS AT 80°C WATTS AT 25°C, 12V MAX 1.4 UL, TUV, CSA PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information: ROHS Compliant © 2016 Littelfuse,Inc,. Specifications are subject to change without notice. Revised July 26, 2016 ELV Compliant Pb-Free littelfuse.com PolySwitch® PTC Devices Overcurrent Protection Device PRODUCT : VLR175LF DOCUMENT: SCD25533 PCN: D34121 REV LETTER: F REV DATE: July 26, 2016 PAGE NO.: 2 OF 2 Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, military, aerospace, medical, lifesaving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. © 2016 Littelfuse,Inc,. Specifications are subject to change without notice. Revised July 26, 2016 littelfuse.com