VTP210F

PolySwitch® PTC Devices 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com PRODUCT: VTP210F Overcurrent Protection Device Raychem Circuit Protection Products DOCUMENT: SCD 26254 PCN: RF0047 REV LETTER: B REV DATE: JUNE 27, 2007 PAGE NO.: 1 OF 1 Specification Status: Released Maximum Electrical Rating Operating Voltage: 16Vdc Interrupt Current: 100A Chip Size: 5 X 12mm Leads: Nickel 1/4H 0.125mm nominal thickness Solder: Lead-free Tape: Polyester (White) 13 mm nominal width Marking: (Color: Green) Manufacturer's Mark V21 Part Identification Lot Identification TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX 20.9 23.1 4.9 5.3 (0.82) (0.90) (0.19) (0.20) *Rounded off approximation C MIN 0.6 (0.02) D MAX 0.8 (0.03) MIN 4.1 (0.16) E MAX 5.8 (0.22) MIN 4.1 (0.16) F MAX 5.8 (0.22) MIN 3.9 (0.15) MAX 4.1 (0.16) TABLE II. PERFORMANCE RATINGS: As measured in Muller Kelvin Clips model BU-75K. I HOLD AMPS 25°C HOLD 2.1 CURRENT TRIP LIMITS TIME TO TRIP REFERENCE RESISTANCE AMPS AMPS AMPS AMPS SECONDS AT OHMS AT 0°C AT 25°C AT 60°C AT --°C 25°C, 10.0A AT 25°C HOLD TRIP HOLD TRIP HOLD TRIP HOLD TRIP MIN MAX MIN MAX 2.9 6.0 2.1 4.7 1.0 2.8 ------5 0.018 0.030 Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: Materials Information: ROHS Compliant ONE-HOUR POST-TRIP RESISTANCE OHMS AT 25°C MIN MAX 0.018 0.060 TRIPPEDSTATE POWER DISSIPATION WATTS AT 25°C,16V MAX 1.5 UL, TUV, CSA PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. OBSOLETE ELV Compliant © 2005, 2007 Tyco Electronics Corporation. All rights reserved Pb-Free NOT the LATEST REVISION