YF211U2C2WCNQ

YF Series 4 Tumbler Miniature Switchlocks Features/Benefits • Multi-pole and multi-position • Positive detent • Low level and power capability Typical Applications • Computer servers • Point-of-sale terminals • Cash registers Models Available Specifications Materials CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA). See page L-14 for additional ratings. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. INDEXING: 90º:2 positions max. LOCK: Zinc alloy with stainless steel facing. 4 tumbler, single bitted lock with integral detent mechanism. KEYS: Two nickel plated brass keys with code number. SWITCH HOUSING: 6/6 Nylon (UL 94V-2). CONTACTS & TERMINALS: Q contact material: Copper, silver plated. See page L-14 for additional contact materials. MOUNTING NUT: Brass, bright zinc plated. TERMINAL SEAL: Epoxy. NOTE: Any models supplied with Q or B contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switchlocks with standard options. For information on specific and custom switchlocks, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages L–12 through L–14. For additional options not shown in catalog, consult Customer Service Center. Switch and Lock Function YF0113 SP, 90° Index, keypull pos. 1 Keying YF2113 DP, 90° Index, keypull pos. 1 2 Two nickel plated brass keys YF011U SP, 90° Index, keypull pos. 1 & 2 YF211U DP, 90° Index, keypull pos. 1 & 2 Lock Type C 4 Tumbler, single bitted lock with detent L Switchlock Lock Finish 2 Stainless steel facing 8 Gloss black facing Terminations 03 Solder lug with hole WC Wire lead Mounting Style N With nut Contact Material Q Silver B Gold Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–11 www.ckswitches.com YF Series 4 Tumbler Miniature Switchlocks SWITCH AND LOCK FUNCTION SINGLE & DOUBLE POLE SWITCHES CONNECTED TERMINALS NO. POLES MODEL NO. SP DP YF0113 YF2113 8-1 8-1, 4-5 1-3 1-3, 5-7 SP DP YF011U YF211U 8-1 8-1, 4-5 1-3 1-3, 5-7 All models POS. 1 POS. 2 KEY PULL POSITIONS POS. 3 LOCK CONFIGURATION INDEXING TERMINAL NUMBERS POS. 1 Position 1 2 90º POS. 1 Positions 1 & 2 with all options when ordered with ‘Q’ contact material. 2 Terminal numbers molded on bottom of housing. LEGEND = Detent Positions (45º or 90º ) = Key pull possible in these positions. = Stop Positions 0029 TERMINAL NUMBERS MOLDED ON HOUSING Part number shown: YF01132C203NQ Switchlock L KEYING 2  TWO NICKEL PLATED BRASS KEYS 1.435 (36,44) .548 (13,91) .174 (4,19) 0029 .772 (19,6) Key Part Number: 960B10029 NOTE: All orders keyed alike with code number on key. For more than one key code, replacement keys, or other special features, consult Customer Service Center. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–12 www.ckswitches.com YF Series 4 Tumbler Miniature Switchlocks LOCK TYPE C  4 TUMBLER, SINGLE BITTED LOCK WITH DETENT LOCK FINISH 2  STAINLESS STEEL FACING 8  GLOSS BLACK FACING TERMINATIONS 03  SOLDER LUG WITH HOLE WC  WIRE LEAD L Switchlock Black wire standard, other colors and lengths available, consult Customer Service Center. UL style 1015. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–13 www.ckswitches.com YF Series 4 Tumbler Miniature Switchlocks MOUNTING STYLE N  WITH NUT Switch and Lock Assembly Instructions PANEL MOUNTING LOCK MUST BE IN PANEL BEFORE ATTACHING SWITCH BASE SWITCH BASE KEY SHOWN IN POSITION ONE .472 DIA. (11,99) .420 (10,67) Nut part number: 1790901A47 ALIGN TAB WITH SLOT AND SNAP TOGETHER Panel thickness: .300 (7,62) max. 4 TUMBLER LOCK NOTE: Switch installation is permanent. Switch cannot be removed from lock after assembly. Attempts to separate switch and lock may damage switch. CONTACT MATERIAL OPTION CODE RoHS COMPLIANT* RoHS COMPATIBLE* CONTACT AND TERMINAL MATERIAL Q YES YES SILVER 2 B YES YES GOLD 1 RATING POWER LOW LEVEL/DRY CIRCUIT 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA). 0.4 VA MAX. @ 20 V AC or DC MAX. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 2 All models CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). with all options when ordered with ‘Q’ contact material. AVAILABLE HARDWARE Switchlock L Key Code: 0029 PART NO. (ONE KEY) 960B10029 Material: Brass Finish: Nickel plate Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–14 www.ckswitches.com