Product Overview
PolyZen CE (Consumer Electronics) Series
The PolyZen CE Series is an integrated overvoltage and overcurrent protection device with
a slim profile suited for todays thin mobile devices like tablets and ultrabooks.
TE Connectivity
PolyZen CE Series
The new PolyZen CE (Consumer Electronics) series of circuit protection devices for tablet
PCs and other portable consumer electronics is a new extension to the family. Consumer
electronics require robust circuit protection to help protect sensitive electronics from
overvoltage and overcurrent events that can result in costly product returns and warranty
issues. The low-profile (1.0 mm-height) PolyZen CE device, rated at an industry-leading
2.6A, is an innovative solution that offers significant performance advantages over discrete
solutions employing fuses, Zeners and other passive devices. The PolyZen CE series offers
board designers plug-and-play overvoltage protection devices that relieve them of the
time it takes to integrate and test less effective discrete and more costly IC solutions.
The PolyZen CE products integrate a precision Zener diode with 5.6V and 13.2V zener
voltage (Vz) options and a PolySwitch PPTC (Polymer Positive Temperature Coefficient)
device in a single, surface mount assembly. Offered in a compact thin package useful
for space constrained applications, the PolyZen CE series uses a thermally protected
KEY FEATURES
Zener diode to help shield downstream electronics against voltage transients, reversebias and the incorrect use of power supplies. The PolySwitch PPTC element shuts out
• Integrated overvoltage and
overcurrent protection
excessive current while the fault condition remains and helps protect the Zener diode and
downstream electronics from damage.
• High hold current rating
• Plug and play with +5V and +12V
Zener voltage option
• Low 1.0mm height profile
• Single component placement
APPLICATIONS
• Tablet PCs and Ultra-books
• Global Positioning and Navigation Systems
• HDDs, SSDs, and Personal Storage
• Cigarette Lighter Adaptor Chargers
• Cell phone charger port and USB power
• Set Top Boxes and Media Players
• Automotive Infotainment power
• DC power port protection
• Industrial handhelds and POS devices
BENEFITS
• High hold current rating up to 2.6A @ 20°C meets Tablet PC requirement
• Low profile for thin form factor consumer electronics
• Fast clamping Zener diode helps to protect downstream electronics
• Integrated plug-and-play device to reduce design and test time
• Single component placement for space constrained applications
• Protects electronics against reverse polarity power sources
• Minimal power dissipation helps to meet total system power budget
• RoHS Compliant and Halogen Free
te.com
TE Connectivity
PolyZen CE Series
TYPICAL APPLICATION BLOCK DIAGRAM
Power Supply
PolyZen Protected Electronics
(External or internal)
GND
2
VIN
PolyZen
Device
1
+
3
VOUT
RLOAD
Regulated
Output
Protected downstream
electronics
ELECTRICAL CHARACTERISTICS
VZ
(V)
IHOLD (1)
(A)
IZt
(A)
@20°C
Leakage
Current
RTyp
(Ω)
R1Max
(Ω)
(2)
Test
Max
@60°C Voltage Current
(V)
(mA)
VINT MAX (4)
(V)
(3)
Test
VINT MAX
Current
(V)
(A)
Test
Voltage
(V)
Power
(W)
Test
Voltage
(V)
5
+3
-40
+16
-12
1
16
16
5
+5
-40
+16
-12
1
16
16
5
+3
-40
+16
-12
1
16
+16
-12
1
16
Typ.
Max.
ZEN132V260A16CE
13.20
13.40
13.65
0.1
2.6
2.0
13.15
5.0
0.032
0.045
16
ZEN056V260A16CE
5.45
5.60
5.75
0.1
2.6
2.0
5.25
10.0
0.032
0.045
ZEN132V230A16CE
13.20
13.40
13.65
0.1
13.15
5.0
0.032
0.060
2.3 @ 20°C
Tripped Power
Dissipation (6)
IFLT MAX
(A)
Min.
Part Description
IFLT MAX (5)
ZEN056V230A16CE
5.45
5.60
5.75
0.1
2.3 @ 20°C
5.25
10.0
0.032
0.060
16
5
+5
-40
ZEN132V130A24CE
13.20
13.40
13.65
0.1
1.3 @ 20°C
13.15
5.0
0.070
0.105
24
3
+3
-40
+24
-16
1
24
ZEN056V130A24CE
5.45
5.60
5.75
0.1
1.3 @ 20°C
5.25
10.0
0.070
0.105
24
3
+10
-40
+24
-16
1
24
Electrical characteristics determined at 25°C unless otherwise specified.
(1) IHOLD: Maximum steady state input current that will not generate a trip event.
(2) RTyp: Resistance between VIN and VOUT pins during normal operation at room temperature.
(3) R1MAX: The maximum resistance between VIN and VOUT pins.
(4) VINT MAX: VINT MAX is defined as the voltage at which typical devices survived at least 100 trip cycles and 24 hours trip endurance at the specified voltage and current.
(5) IFLT MAX: Maximum RMS fault current the diode can withstand and remain resettable.
(6) The power dissipated by the device when in the “tripped” state.
TYPICAL FAULT RESPONSES
20
16
14
14
12
12
10
10
8
8
6
6
4
4
2
2
0
0.00
0
0.00
0.05
VIN
VOUT
IFLT
0.05
0.10
0.10
0.15
0.15
0.20
Time (sec)
Time (sec)
te.com
VIN
IFLT
0.25
0.30
0.30
15
10
VIN
VIN
VOUT
VOUT
20
20
VOUT
0.20
0.25
25
V (V) or I (A)
16
Fault Response:
ZEN132V130A24CE
TypicalTypical
Fault Response:
ZEN132V130A24CE
/ 3A Current
Limited
(IOUT=0)
24V / 24V
3A Current
Limited
SourceSource
(IOUT=0)
25
V (V) or I (A)
18
18
V (V) or I (A)
V (V) or I (A)
20
Fault Response:
ZEN056V260A16CE
TypicalTypical
Fault Response:
ZEN056V260A16CE
16VCurrent
/ 5A Current
Limited
(IOUT=0)
16V / 5A
Limited
SourceSource
(IOUT=0)
15
10
5
5
0
0.00
0
0.00
IFLT
0.05
0.05
0.10
0.10
0.15
Time (sec)
Time (sec)
IFLT
0.15
0.20
0.20
TE Connectivity
PolyZen CE Series
GENERAL CHARACTERISTICS FOR POLYZEN DEVICES
Operating temperature range
-40° to +85°C
Storage temperature
-40° to +85°C
ESD withstand
15kV Contact Discharge
IEC61000-4-2, Level 4
Diode capacitance
4200pF
Typical @ 1MHz, 1VRMS
Construction
RoHS compliant and Halogen Free
DEVICE INFORMATION
Pin Configuration and Block Diagram
2-0.50+/-0.05
GND
GND = Ground
VOUT
VOUT = Zener regulated voltage output
3.80+/-0.05
Zener
Diode
3.00+/-0.015
VIN
VIN = Protected input to Zener diode
1.81+/-0.015
3
VOUT
VIN
Polymer PTC
2-0.80+/-0.015
2
3
0.72+/-0.015
3.00+/-0.05
1
1
VIN
Pin 1.12+/-0.05
Name
Pin Function
2-1.20+/-0.05
Pin
Number
2.21+/-0.05
2
GND
2-0.40+/-0.015
VOUT
GND
3.80+/-0.015
Mechanical Dimension and Recommended Pad Layout
Recommended Pad Layout
L
2-0.50+/-0.05
0.72+/-0
3
VOUT
3.80+/-0.05
H
Recommended Solder Stencil (mm)
(mm)
Min
2-0.50+/-0.05
2-0.40+/-0.015
Max
W
3.8
4.0
4.2
Height
H
0.8
1.0
1.2
Dimension
A
3 0.7
VOUT
0.8
0.9
5.2
3.80+/-0.05
0.72+/-0.015
3.80+/-0.015
Solder thinkness - 0.15mm
te.com
3.00+/-0.015
Width
1.12+/-0.05
2-0.80+/-0.015
5.0
1.81+/-0.015
2
GND4.8
3.00+/-0.05
L
2-1.20+/-0.05
Length
2.21+/-0.05
1
VIN
Typical
1.81+/-0.015
3.00+/-0.05
2-1.20+/-0.05
1
VIN
W
1.12+/-0.05
2.21+/-0.05
2
GND
A
2-0.40
3.80+
TE Connectivity
PolyZen CE Series
RECOMMENDED REFLOW PROFILE
Classification Reflow Profiles
Pb-Free Assembly
Average Ramp-up Rate (TsMAX to Tp)
3°C/second max
Average Ramp-down Rate (Tp to TL)
6°C/second max
Preheat
• Temperature Min (TsMIN)
150°C
• Temperature Max (TsMAX)
200°C
• Time (ts Preheat)
60-180 seconds
Critical Zone
TL to Tp
Tp
Ramp-up
Ramp-down
TL
Temperature (T)
Profile Feature
TsMAX
TsMIN
Time maintained above:
• Temperature (TL)
217°C
• Time (tL)
60-150 seconds
tL
ts Preheat
t 25°C to Peak
Peak / Classification Temperature
• Temperature (Tp)
tp
Time (t)
260°C
Time within 5°C of actual peak
• Time (tp)
20-40 seconds
Time 25°C to peak Temperature
8 minutes max
PART NUMBERING SYSTEM
ZEN
056V
260A
16
CE
Special Labeling
CE = PolyZen CE Series
VINT MAX Rating
16 = 16V
PPTC Hold Current Group
260 = 2.6A
Zener Voltage Group
056 = 5.6V
PolyZen Product Family
DEVICE MARKING INFORMATION
VVVII
####
VVVII
Zener Voltage
Hold Current
Part Description
05613
5.6V
1.3A
ZEN056V130A24CE
05623
5.6V
2.3A
ZEN056V230A16CE
05626
5.6V
2.6A
ZEN056V260A16CE
13213
13.2V
1.3A
ZEN132V130A24CE
13223
13.2V
2.3A
ZEN132V230A16CE
13226
13.2V
2.6A
ZEN132V260A16CE
####
te.com
Last 4 digits of batch number
TE Connectivity
PolyZen CE Series
TAPE AND REEL
10 DIMENSION
pitches cumulative
tolerance on tape 0.2mm.
K
D
P0
P2
E
10 pitches cumulative
10 pitches cumulative
tolerance on tape 0.2mm.
tolerance on tape 0.2mm. F
Max. 5°
B0K K
D
D
P2
W
P0
P2P0
E
E
0
t
A0
Max. 5°
Max. 5°
B1
B1
D1
P
F
F
B0
User
B0 Direction of Feed
K0
K0
t
t
W
A0
A0
P
P
D1
W
D1
User Direction of Feed
User Direction of Feed
100mm
100mm
100mm
Dimension (mm)
D0
1.55 + 0.1 - 0.0
E1
1.75 0.1
P0
4.0 0.1
T max
0.35
B1 max
6.2
D1 min
1.5
F
5.5 0.05
K1 max
1.7
P2
2.0 0.05
W
12.0 0.3
P1
8.0 0.1
A0
4.3 0.05
B0
5.3 0.05
K0
1.3 0.05
Note:
1. Materials: Conductive PS.
2. All dimensions meet EIA-481-D.
Allowable Camber to be 1mm/100mm
Noncumulative Over 250mm
1mm Max.
Symbol
Allowable Camber to be 1mm/100mm
Allowable Camber to be 1mm/100mm
Noncumulative Over 250mm
Noncumulative Over 250mm
1mm Max.
1mm Max.
1mm Max.
1mm Max.
1mm Max.
Matte Finish These Area
Lock Feature (6 places)
Lock Feature (6 places)
Lock Feature (6 places) Amax
330.0
Nmin These Area
Matte Finish
Matte Finish These Area
+0.25
–4.00
102.0 Ref
A
Amaxmax
+0.25
330.0+0.25
–4.00
330.0
–4.00
See “Detail A”
N
Nmin min
Symbol
Dimension (mm)
Amax
330
Nmin
102
W1
8.4
W2
11.1
102.0 Ref
102.0 Ref
W1 (measured at hub)
W2 (measured at hub)
ø20.2 Min
See “Detail A”
See “Detail A”
ø13.0 +0.5
–0.2
2.0 +/– 0.5
ø20.2 Min
ø20.2 Min
Detail A
ø13.0 +0.5
–0.2
ø13.0 +0.5
–0.2
2.0 +/– 0.5
2.0 +/– 0.5
Detail A
Detail A
te.com
W1 (measured at hub)
at hub)
W1 (measured
W2 (measured at hub)
W2 (measured at hub)
TE Connectivity
PolyZen CE Series
POLYZEN PRODUCT FAMILY PACKAGE QUANTITY
Reel Quantity
Standard Box Quantity
4,000
20,000
MATERIAL INFORMATION
RoHS Compliant
ELV Compliant
Halogen Free*
Directive 2002/95/EC
Compliant
Directive 2000/53/EC
Compliant
HF
* Halogen Free refers to: Br≤900ppm, Cl≤900ppm, Br+Cl≤1500ppm.
te.com
FOR MORE INFORMATION
TE Circuit Protection
308 Constitution Drive
Menlo Park, CA USA 94025-1164
Tel : (800) 227-7040, (650) 361-6900
Fax : (650) 361-4600
www.circuitprotection.com
www.circuitprotection.com.hk (Chinese)
www.te.com/japan/bu/circuitprotection/ (Japanese)
Brazil
Tel : 55-11-2103-6090
Fax : 55-11-2103-6216
Japan
Tel : 81-44-900-5110
Fax : 81-44-900-5140
China, Beijing
Tel : 86-10-6569-3488 x 16526
Fax : 86-10-6569-3206
Singapore / Indonesia
Thailand / Malaysia / Vietnam
Tel : 60-4-8102112
Mobile : 60-194725628
Fax : 60-4-6433288
UK / Eire / Benelux / Israel /
Korea
China, Shanghai
South Africa / Nordic / Baltic / Others Tel : 82-2-3415-4654
Tel : 86-21-6106-7379
Tel : 49-89-6089485
Fax : 82-2-3486-1786
Fax : 86-21-6485-3255
India
Fax : 49-89-6089394
Tel : 91-80-4161-3745
Taiwan
China, Shenzhen / Guangzhou
Mobile : 91-99-0248-8886
Germany / Austria / Switzerland /
Tel : 886-2-8768-2788 x 211 Tel : 86-755-2515-4797
Eastern Europe / Russia
Fax : 886-2-8768-1277
Fax : 86-755-2598-0419
Tel : 49-89-6089584
Fax : 49-89-6089394
China, Hong Kong
Australia / Philippines
Tel : 852-2738-8181
Tel : 63-2-988-9465
France/ Italy / Iberia /
Fax : 852-2735-1185
Fax : 63-2-848-0205
Greece / Turkey
Tel : 33-1-34208455
Part numbers in this brochure are RoHS Compliant*, unless marked otherwise.
*as defined www.te.com/leadfree
Fax : 33-1-34208479
te.com
© 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
RCP0138E 08/2012
PolyZen, TE Connectivity and TE connectivity (logo) are trademarks. Other logos, product and/or
company names might be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE
reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied
warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a
particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications
are subject to change without notice. Consult TE for the latest dimensions and design specifications.
很抱歉,暂时无法提供与“ZEN132V230A16CE”相匹配的价格&库存,您可以联系我们找货
免费人工找货