ZMCJM9L0L

ZM Series Mini Size Snap-acting Switches Features/Benefits • Reliable snap-acting mechanism • Long electrical and mechanical life • Compact size—Ideal when space is Typical Applications • PCB detection switch • Communication devices • Testing equipment limited • Security/Alarm systems • Various PCB terminals and actuators • Consumer electronics • Automotive: door latch, seat • RoHS compliant / compatible position detection, EV charging UL61058-1 Specifications Materials CONTACT RATING: F7: 3A @ 125 VAC M9: 0.2A @ 60 VDC. ELECTRICAL LIFE: 10,000 Cycles. @ 3A INSULATION RESISTANCE: 100 M ohm min. DIELECTRIC STRENGTH: 1000 Vrms. OPERATING TEMPERATURE: –30ºC to 85ºC. OPERATING FORCE: CJ: 150 grams, CH: 90 grams. COVER: Nylon 6/6 ACTUATOR BUTTON: Nylon 6/6 CASE: Nylon 6/6 SPRING: SUS MOVABLE BLADE: BeCu MOVABLE CONTACT: Silver alloy (M9 option gold plated) FIXED CONTACTS: Silver alloy (M9 option gold plated) FIXED TERMINALS: Brass - Ag plated. ACTUATOR (Leaf / Roller options): SUS * Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @ 20 V AC or DC max. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. For additional options not shown in catalog, consult Customer Service Center. Series ZM SP, Mom. Operating Force CJ 150 grams CH 90 grams Electrical Rating see chart below Actuator P0 Pin plunger L01 Leaf L32 Leaf T13 Simulated roller T23 Simulated roller Option Code UL  1054 F7 3 A 125 V AC M9 0.1 A 48 V DC 0.2 A 60 V DC 0.1 A 125 V AC UL  61058-1 3 A 125 V AC 3 A 30 V DC 0.1 A 48 V DC 0.2 A 60 V DC 0.1 A 125 V AC Terminations T PC Thru-hole L Left-footed, PC Thru-hole R Right-footed, PC Thru-hole K PC Thru-hole with retention feature 14 Available in Operating Force-Actuator combination: CJ-L01 CH-L32 3 A 125 V AC 0.1 A 48 V DC 0.2 A 60 V DC 0.1 A 125 V AC Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 31 May 21 J–15 www.ckswitches.com Snap-acting NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. J ZM Series Mini Size Snap-acting Switches SERIES ZM  MINI SIZE SNAP-ACTING SWITCHES – SP MOMENTARY 0.044 (1,12) .260 (6,6) FREE POS. OPER. POS. .081 (2,05) NC C .024 (0,6) ZMCJF7L0T SPDT ø .079 (ø2,05) NO PC MOUNTING J Snap-acting MOUNTING SCREWS SIZE 1-64 OPERATING FORCE OPTION CODE BASIC SWITCH OPERATING FORCE (OZ./GRAMS) CJ 5.29 150 CH 3.15 90 ELECTRICAL RATING CONTACT MATERIAL OPTION CODE RoHS COMPLIANT* RoHS COMPATIBLE* STATIONARY CONTACT MOVABLE CONTACT ELECTRICAL RATING F7 Yes Yes Silver alloy see chart M9 Yes Yes Gold plating or silver alloy see chart * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. All models with all options. Consult Customer Service center for availability and delivery of nonstandard ratings. Option Code UL  1054 F7 3 A 125 V AC M9 0.1 A 48 V DC 0.2 A 60 V DC 0.1 A 125 V AC UL  61058-1 3 A 125 V AC 3 A 30 V DC 0.1 A 48 V DC 0.2 A 60 V DC 0.1 A 125 V AC 14 3 A 125 V AC 0.1 A 48 V DC 0.2 A 60 V DC 0.1 A 125 V AC Dimensions are shown: Inch (mm) Specifications and dimensions subject to change 31 May 21 J–16 www.ckswitches.com ZM Series Mini Size Snap-acting Switches ACTUATOR L0  LEAF, 50 GRAMS (CJ ONLY) L3  LEAF, 30 GRAMS (CH ONLY) P0  PIN PLUNGER T13  SIMULATED ROLLER, 40 GRAMS (CJ ONLY) T23  SIMULATED ROLLER, 25 GRAMS (CH ONLY) 15.65 14 FP 8.35 FP FP OP OP ACTUATOR OPTION CODE A (mm) B Ref (mm) C (mm) D (mm) E (mm) LENGTH OF LEVER LEVER LENGTH MTG. HOLE TO OP PRETRAVEL MAX OPERATING POSITION FREE POSITION MAX P0 PIN PLUNGER OP DIFF. MOTION mm MAX OPER. FORCE grams MAX CJ CH RELEASED FORCE Grams MAX OVER TRAVEL MIN 15-20 0.2 NA 1.3 7.0 0.3 8.0 0.3 150 90 L0 LEAF 13.0 4.03 3.4 8.4 0.8 11.0 1.3 50 - 8 0.6 L3 LEAF 13.0 4.03 3.4 8.4 0.8 11.0 1.3 - 30 5 0.6 T13 SIMULATED ROLLER 15.0 5.36 3.8 10.5 0.8 13.0 1.5 40 - 7 0.6 T23 SIMULATED ROLLER 15.0 5.36 3.8 10.5 0.8 13.0 1.5 - 25 4 0.6 TERMINATIONS K  PC THRU-HOLE WITH RETENTION FEATURE T  (STD.) PC THRU-HOLE .138 (3,5) .043 (1.10) TYP. .035 (0,9) .02 (0,4) L  LEFT FOOTED, PC THRU-HOLE .02 (0.4) R  RIGHT FOOTED, PC THRU-HOLE .071 (1,8) .035 TYP. (0,9) .071 (1,8) .122 (3,1) .035 TYP. (0,9) .122 (3,1) Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 31 May 21 J–17 www.ckswitches.com J Snap-acting NA