HANBit
HMD1M1Z1
1Mbit(1Mx1bit) Fast Page Mode, 1K Refresh, 20Pin ZIP, 5V Design Part No. HMD1M1Z1
DESCRIPTION
The HMD1M1Z1 is an 1M x 1 bits Fast Page Mode CMOS DRAMs. Fast Page Mode offers high speed random access of memory cells within the same row. Power supply voltage (+5V ), access time (-5, -6), power consumption(Normal or Low power), and package type (ZIP) are optional features of this Module. The HMD1M1Z1 have CAS-before-RAS refresh, RAS-only refresh and Hidden refresh capabilities. The HMD1M1Z1 is optimized for application to the systems, which are required high density and large capacity such as main memory for main frames and mini computers, personal computer and high performance microprocessor systems. The HMD1M1Z1 provides common data and outputs.
Features
w Fast Page Mode operation w CAS-before-RAS refresh capability w RAS-only and Hidden refresh capability w Fast parallel test mode capability w TTL(5V) compatible inputs and outputs w Early write or output enable controlled write w Available in 20pin ZIP packages w Single +5V± 10% power supply w 1,024 Refresh Cycles/16ms w Performance Range Speed HMD1M1Z1-5 HMD1M1Z1-6 tRAC 50 60 tCAC 15 15 tRC 90 110 tPC 35 40 PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14
PIN ASSIGNMENT
SYMBOL NC /CAS DOUT VSS DIN /WE /RAS NC NC A9NC A0 A1 A2 A3 VCC A4 A5 A6 A7 A8
PIN DESCRIPTION
PIN A0 – A8 DQ0 – DQ3 /RAS /CAS FUNCTION Address Inputs Data Input/Output Row Address Strobe Column Address Strobe PIN /WE Vcc Vss NC FUNCTION Read/Write Enable Power (+5V) Ground No Connection
15 16 17 18 19 20
1
HANBit Electronics Co.,Ltd.
HANBit
ABSOLUTE MAXIMUM RATINGS*
SYMBOL TA TSTG VIN/VOUT VCC IOUT PD PARAMETER Ambient Temperature under Bias Storage Temperature (Plastic) Voltage on any Pin Relative to Vss Power Supply Voltage Short Circuit Output Current Power Dissipation RATING 0 ~ 70 -55 ~ 150 -1.0 ~ 7.0 -1.0 ~ 7.0 50 600
HMD1M1Z1
UNIT C C V V mA mW
*NOTE: 1. Stress greater than above absolute Maximum Ratings?
May cause permanent damage to the device.
RECOMMENDED DC OPERATING CONDITIONS (TA = 0 ~ 70C)
PARAMETER Supply Voltage Ground Input High Voltage Input Low Voltage *NOTE: All voltages referenced to Vcc SYMBOL Vcc Vss VIH VIL MIN 4.5 0 2.4 -1.0 TYP. 5.0 0 MAX 5.5 0 Vcc+1 0.8 UNIT V V V V
DC AND OPERATING CHARACTERISTICS
SYMBOL VOH VOL ICC1 ICC2 ICC3 PARAMETER Output High Level Voltage (IOUT = -5mA) Output Low Level Voltage (IOUT = 4.2mA) Operating Current (/RAS,/CAS,Address Cycling : tRC = tRC min) Standby Current (/RAS,/CAS = VIH) /RAS Only Refresh Current (/RAS Cycling, /CAS = VIH,: tRC = tRC min) Fast Page Mode Current ICC4 ICC5 ICC6 (/RAS =VIL, /CAS, Address Cycling : tPC = tPC min) Standby Current (/RAS,/CAS >= Vcc – 0.2V) -5 /CAS before /RAS Refresh Current (tRC = tRC min) -6 Self Refresh Current ICCS (/RAS=/UCAS=/LCAS=VIL, /WE=/OE=A0~A9= Vcc – 0.2V or 0.2V, DQ0~DQ31= Vcc – 0.2V, 0.2V or Open) Input Leakage Current II(L) (Any Input (0V
很抱歉,暂时无法提供与“HMD1M1Z1-6”相匹配的价格&库存,您可以联系我们找货
免费人工找货