0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
RF-5382H-CU001

RF-5382H-CU001

  • 厂商:

    HARRIS(哈里斯)

  • 封装:

  • 描述:

    RF-5382H-CU001 - FAST TUNE AUTOMATIC ANTENNA COUPLER - Harris Corporation

  • 详情介绍
  • 数据手册
  • 价格&库存
RF-5382H-CU001 数据手册
® assuredcommunications™ RF-5382H-CU001 FAST TUNE AUTOMATIC ANTENNA COUPLER The RF-5382H coupler automatically matches the output of FALCON® II Series HF transceivers to a wide variety of whip, dipole, and long-wire antennas over the frequency range of 1.6 to 30 MHz. The antenna coupler tuning time from memory is less than 150 milliseconds and it operates at power levels from 20 to 150 watts. The RF-5382H is compatible with advanced waveforms and network protocols that require very fast frequency change and functions reliably under the most severe environmental conditions in vehicular, transportable, shipboard, and fixed-station applications. The frequency selective discriminator allows precision tuning in the difficult co-site installations that are dictated by highly mobile tactical platforms. The RF-5382H Antenna Coupler is designed for direct interface with FALCON® II HF systems and is fully compatible with the built-in MIL-STD-188-141B and STANAG-4538 Automatic Link Establishment (ALE) protocols. The coupler requires a control cable and RF coax interface to connect to the associated transceiver. Separation can be up to 250 feet (76 m). A high voltage ceramic insulator provides the connection to untuned antennas while a selectable N-connector provides connection to fixed site broadband or resonant antennas. When used in a 20 watt system, the RF-5382H will automatically switch VHF signals to the 50 ohm N-connector. All key operating parameters are continually monitored during operation to automatically maintain operation within safe limits and stay “on the air.” If safe limits are exceeded, a coupler fault is reported to the transceiver and the coupler bypassed. Internal built-in test to the module level provides rapid diagnostic troubleshooting and repair. Specifications for the RF-5382H-CU001 High Voltage Antenna Port Rated RF Input Tuning Capability (1.6 to 30 MHz) Up to 150 Watts PEP and Average 8 to 35 foot whips 25 to 150 foot long wires 40 to 100 foot dipoles (including RF-1912 and RF-1936) Automatically tunes to 50 ohms, within a VSWR of 2:1 150 milliseconds 2 seconds maximum Whips: 1.6 to 4 MHz: 15 to 85%; 4 to 30 MHz: 50 to 95% Long Wires and Dipoles: 1.6 to 30 MHz: 60 to 95% Note: Efficiency depends on frequency, antenna length, and ground plane Tuning Accuracy Memory Tuning Time New Frequency Tuning Time Efficiency 50-Ohm Antenna Port Rated RF Input Antennas VHF Operation Up to 150 Watts PEP and Average Broadband and dipole resonant fixed frequency antennas Automatically switches output to 50-ohm port (N-connector) Electrical Channel Capability Collocation Rejection Protection Features Antenna Matching Bypass BIT 500 channel memory Operates in collocated installations with 5% frequency separation Protection from high VSWR, high temperature, RF over-voltage and over-current, Lightning surge protection on all control lines and RF signal path Automatic and manually controlled transmit and receive bypass Fault isolation to module level Installation Primary Power Requirements Remote Capability Enclosure Design Weight Size Accessories Supplied Color 16 to 40 VDC Up to 250 feet (75 m) separation between transceiver and coupler Submersible to 3 feet (0.9 m) of water, designed for exposed installations 17.5 lbs (7.8 kg) 9.3W x 14.7L x 6.8H inches (including projections) 23.6W x 37.3L x 17.3H cm (including projections) Coupler mounting hardware, installation material, safety shield, and the Intermediate Maintenance manual CARC Green 383 Environmental Test Method Shock and Vibration Immersion Operating Temperature Per MIL-STD-810F Ground tactical (with RF-5384VM-01 Shock Mount) 3 feet (0.9 m) of water –40˚C to +70˚C Accessories and Cables Cables Shock Mounts Control: 12020-1460 Coax: 10181-9824 for 100, 125, and 150 W systems; 10369-7211 for 20 W systems RF-5384VM-01 (tracked and wheeled vehicles) Sun Shield Siting Kits Transit Case System` Falcon is a trademark of Harris Corporation. Specifications are subject to change without notice. 12020-1194-01 RF-5351-AT Series RF-5382H-TM001 ® RF Communications Division | 1680 University Avenue | Rochester, NY USA 14610 www.harris.com 1-585-244-5830 Copyright © 2005 Harris Corporation 6/05 DS-284B assuredcommunications™
RF-5382H-CU001
### 物料型号 - 型号:RF-5382H-CU001

### 器件简介 - 简介:RF-5382H耦合器自动匹配FALCON® II系列高频收发器的输出,适用于1.6至30MHz频率范围内的各种鞭状天线、偶极天线和长导线天线。耦合器的调谐时间从内存中少于150毫秒,适用于20至150瓦的功率水平。

### 引脚分配 - 控制线:需要控制电缆和RF同轴接口连接到相关的收发器。 - 天线接口:高电压陶瓷绝缘体提供连接到未调谐天线,可选择的N型连接器提供连接到固定站点宽带或谐振天线。

### 参数特性 - 频率范围:1.6至30MHz - 功率:支持高达150瓦的峰包功率和平均功率 - 调谐能力:自动调谐至50欧姆,VSWR为2:1 - 调谐时间:150毫秒内完成调谐,新频率调谐时间最多2秒 - 效率:取决于频率、天线长度和地面平面

### 功能详解 - 自动调谐:在高度移动的战术平台上,即使在困难的共址安装中也能精确调谐。 - 兼容性:与FALCON® II HF系统直接接口,并完全兼容内置的MIL-STD-188-141B和STANAG-4538自动链路建立(ALE)协议。 - 保护功能:防止高VSWR、高温、RF过电压和过电流,所有控制线和RF信号路径上的雷电浪涌保护。 - 故障隔离:自动和手动控制的发射和接收旁路,故障隔离至模块级别。

### 应用信息 - 应用场景:适用于车载、便携式、船载和固定站应用。 - 环境适应性:在极端环境下可靠运行。

### 封装信息 - 电源要求:16至40VDC - 远程能力:收发器和耦合器之间可分离至250英尺(76米)。 - 外壳设计:可浸入3英尺(0.9米)的水下,设计用于暴露安装。 - 重量和尺寸:17.5磅(7.8公斤),尺寸为9.3W x 14.7L x 6.8H英寸(包括突出部分)。 - 配件:耦合器安装硬件、安装材料、安全屏蔽和中级维护手册。
RF-5382H-CU001 价格&库存

很抱歉,暂时无法提供与“RF-5382H-CU001”相匹配的价格&库存,您可以联系我们找货

免费人工找货