C90-3106F14S-2P

Customer Information Sheet IF IN DOUBT - ASK DRAWING No.: C90-3106FXXSX-XX NOT TO SCALE C 10SL-4 12S-3 14S-2 www.harwin.com technical @harwin.com DIM 'D' SEE NOTE 4 14S-6 SPECIFICATIONS: MATERIAL: SHELL = ALUMINIUM ALLOY INSULATOR = SYNTHETIC RUBBER GROMMET = SYNTHETIC RUBBER CONTACT = COPPER ALLOY ORDER CODE: FINISH: C90-3106FXXXX-XX SHELL = ZINC COBALT ALLOY, BLACK CONTACT = SILVER ENVIRONMENTAL: SHELL SIZE (CONTACT LAYOUT): OPERATING TEMPERATURE = -55°C TO +125°C 10SL-3, 10SL-4, 12S-3, 14S-2 MECHANICAL: 14S-6 VIBRATION SENSITIVITY = 10Hz TO 500Hz, 98m/s² (10G) SHOCK SEVERITY = 490m/s² (50G) FOR 11ms CONTACT GENDER: WATER RESISTANCE (SEALING) = 1.8m FOR 48HRS, P - MALE EXCEEDS IP67 S - FEMALE ELECTRICAL: CURRENT RATING = 13A VOLTAGE RATING: DIM 'A' 10SL,12S SHELL SIZES = 500V AC, 700V DC SHELL SIZE DIM 'B' 'C' THREAD MAX 14S SHELL SIZE = 200V AC, 250V DC VOLTAGE PROOF: 10SL 58.72 22.04 5/8-24UNEF 10SL & 12S SHELL SIZES = 2,000V AC 12S 58.72 25.40 3/4-20UNEF 14S SHELL SIZES = 1,000V AC INSULATION RESISTANCE = 5,000M MIN 14S 58.72 28.30 7/8-20UNEF FOR MECHANICAL/ELECTRICAL REQUIREMENTS, SEE COMPONENT SPECIFICATION CO45XX (LATEST ISSUE) THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. ALL DIMENSIONS IN mm DIM 'A' 'C' THREAD CONTACT LAYOUT (SHOWN LOOKING AT THE MATING FACE) 10SL-3 THIRD ANGLE PROJECTION TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = DIM 'B' NOTES: 1. PRODUCT IS RoHS COMPLIANT. 2. PRODUCT IS PACKED IN BAGS. 3. RECOMMENDED WIRE SIZE 16-22 AWG. 4. CABLE CLEARANCE. 5. RECOMMENDED WIRE STRIP LENGTH = 7.5mm. 6. RUBBER BUSHING SUPPLIED WITH CONNECTOR - SEE TABLE FOR APPLICABLE PRODUCT MGP APPROVED: DIM 'D' MAX 31681 DATE CN/CO MGP DRAWN: 7.14 C90-3240-4 10.31 C90-3240-6 R.ADDE CUSTOMER REF.: ASSEMBLY DRG: TITLE: STRAIGHT PLUG SEE ABOVE S/AREA: 29.06.22 CHECKED: MR C90-3240-4 DRAWING NUMBER: SEE ABOVE 5 UNLESS STATED RUBBER BUSHING 7.14 MATERIAL: FINISH: 10 NAME ISS. mm² C90-3106FXXSX-XX SHT 2 OF 2