G125-0010005

Customer Information Sheet DRAWING No.: G125-0010005, G125-0020005 IF IN DOUBT - ASK NOT TO SCALE C 1.04 MAX THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm 4.45 2.00 SECTION Y-Y DIM 'A' G125-0010005 NO IDENT NOTES: 1. G125-0010005 IS SUITABLE FOR WIRE GAUGE 26 AWG. MAXIMUM INSULATION DIAMETER 0.80mm, STRIP WIRE BY 1.50-1.75mm FOR CRIMPING. 2. G125-0020005 IS SUITABLE FOR WIRE GAUGE 28-32 AWG. MAXIMUM INSULATION DIAMETER 0.72mm, STRIP WIRE BY 1.50-1.75mm FOR CRIMPING. 3. RECOMMENDED CRIMP TOOL = Z125-900 & POSITIONER = Z125-901 CONTACT INSERTION / WITHDRAWAL KIT = Z125-902. 4. FOR INSTRUCTIONS ON HAND CRIMP TOOL Z125-900, SEE INSTRUCTION SHEET IS-37. 5. RECOMMENDED WIRE TYPES INCLUDE: BS 3G 210 Type A, MIL-W-16878/6 Type ET AND NEMA HP3 Type ET. 6. PACKING: 100 PER BOX. 7. HANDLING GUIDLINES: WHEN HANDLING THIS PRODUCT WEAR NITRILE/LATEX POWDER FREE GLOVES OR FINGER COTS. TO PREVENT THE CONTAMINATION OF CONTACTS FROM HANDS. G125-0020005 IDENT PART No. G125-0010005 G125-0020005 www.harwin.com technical @harwin.com MATERIAL BERYLLIUM COPPER THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. FINISH X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = 5 UNLESS STATED DIM 'C' 0.50 PATENTED TECHNOLOGY MGP 11 NAME ISS. DIM 'A' 0.20-0.30µm GOLD OVER 1.5-2.5µm NICKEL TOLERANCES DIM 'B' DIM 'B' DIM 'C' 0.60 0.55 0.88 0.85 0.95 0.92 NO 0.48 0.44 0.80 0.77 0.87 0.84 YES CHECKED: CN/CO MGP FC DRAWN: S.FLOWER CUSTOMER REF.: ASSEMBLY DRG: G125 SERIES FEMALE CRIMP SIGNAL CONTACTS SEE TABLE S/AREA: APPROVED: 32097 DATE TITLE: MATERIAL: FINISH: IDENT GROOVE 24.11.22 DRAWING NUMBER: SEE TABLE mm² G125-0010005, G125-0020005 SHT 3 OF 3