G125-MV11005M3R

G125 COMPONENT SPECIFICATION C12510 G125 Series: 1.25mm Pitch High Reliability Connectors Component Specification June 2020 Contents 1. Description of Connector ....................................................................................................................................................2 2. Ratings .................................................................................................................................................................................2 2.1. Materials ......................................................................................................................................................................2 2.2. Electrical Characteristics .............................................................................................................................................2 2.3. Mechanical Characteristics .........................................................................................................................................3 2.4. Environmental Characteristics ...................................................................................................................................3 2.5 Wire Termination information – Signal crimp products ...........................................................................................3 2.6 Wire Termination information – Power crimp products ......................................................................................... 4 Appendix 1 ...............................................................................................................................................................................5 Appendix 1.1. – Gecko-SL Contact numbering .................................................................................................................5 Appendix 1.2. – Gecko with Latches Contact numbering ...............................................................................................5 Appendix 1.3. – Gecko-MT Part Numbering .................................................................................................................... 6 -1- C12510 Issue: 10 C/Note: 30051 Date: 08.06.20 G125 COMPONENT SPECIFICATION C12510 1. DESCRIPTION OF CONNECTOR The G125 series of connectors (branded “Gecko”) comprises of: barrel crimp contacts and crimp housings available in Male and Female genders; Vertical and Horizontal PC-Tail Connectors and Vertical Surface Mount Connectors; all on a 1.25mm pitch. Connectors are fully shrouded, unsealed connectors for interconnecting cable-to-cable, cable-to-board and board-to-board applications. The Gecko Crimp variants are fully shrouded, unsealed connectors with replaceable contacts. They are designed for interconnecting cable-to-cable and cable-to-board. The housings have a low profile potting wall to allow back potting for additional strain relief and improved sealing where required. All pre-made cable assemblies are supplied back-potted for customer convenience, and individually crimped contacts are also available. There are three variants of the range, the ranges are not intermateable: • Gecko-SL – Screw-Lok version. Female connectors have floating screws for secure, robust interconnection to the male counterpart. Male Screw-Loks can also have board-mount studs for secure PCB connection. • Gecko with Latches (original design). Male variants can be equipped with locking latches for secure interconnection with easy to release features. Latches can be specified with through board locking features or surface mount pads for additional security. • Gecko-MT. Connectors are equipped with both signal and power contacts and are available in crimped or through-board configurations. Screw-Lok technology is used to secure the connectors, and board-mount studs for PCB fastening are available. All contacts are gold plated all over for high performance and long service life; the contact plating is hard acid gold of 98% purity. The Gecko-SL and latched ranges cover 06, 10, 12, 16, 20, 26, 34 and 50 total number of contacts in a dual row configuration. Connector housings are polarised to prevent mis-matching and have contact position one indicated on the outside of the housings. Metal backshells are available for sizes 06, 10, 12 and 16 cable variants in the Gecko-SL range, to provide mechanical, RF and EMC protection. Gecko-MT connectors are available in ’01-08-01’ and ’02-08-02’ configurations, with 2 power contacts and 8 signal contacts or 4 power contacts and 8 signal contacts respectively. 2. RATINGS 2.1. MATERIALS All materials are also listed on individual drawings. All Power Contacts ..................................................................... Beryllium Copper All Female Signal Contacts ......................................................... Beryllium Copper Male PCB Signal contacts ........................................................... Phosphor Bronze Male Crimp Signal Contacts........................................................ Brass Contact plating finish ................................................................. Hard Gold over Nickel Housing ....................................................................................... 30% Glass Filled Thermoplastic UL94 V-0 Latches ........................................................................................ Copper-Nickel-Tin alloy, Tin over Nickel finish Screw-Lok fixings ....................................................................... Stainless Steel Metal Backshells ......................................................................... Aluminium 6061-T6, High Phosphous Nickel finish Potting Compound ...................................................................... Stycast 2651MM with Catalyst 9 2.2. ELECTRICAL CHARACTERISTICS EIA-364-70A: 1998 – Current – per individual signal contact, 25°C ambient .................. 2.8A max (When only one contact per connector is electrically loaded) EIA-364-70A:1998 – Current – per track for Flex Circuits, 25°C ambient…………………….0.4A max EIA-364-70A: 1998 – Current – per signal contact through all contacts, 25°C amb........ 2.0A max EIA-364-70A: 1998 – Current – per power contact through all contacts ......................... 10.0A max -2- C12510 Issue: 10 C/Note: 30051 Date: 08.06.20 G125 COMPONENT SPECIFICATION C12510 2.2. ELECTRICAL CHARACTERISTICS (CONT.) EIA-364-20C: 2004 – Voltage Proof (at 1013mbar, sea level) .............................. 600V DC or AC peak EIA-364-20C: 2004 – Voltage Proof (at 44mbar, 21,336m/70,000ft) ................... 350V DC or AC peak Working Voltage (at 44mbar, 21,336m/70,000ft)…………………………. .................. 250V DC or AC peak Working Voltage (at 1006mbar, sea level)………………………………. ....................... 450V DC or AC peak EIA-364-06C: 2006 – Contact Resistance (initial) ................................................. 20mΩ max EIA-364-06C: 2006 – Contact Resistance (after conditioning) ............................. 25mΩ max EIA-364-21C: 2000 – Insulation Resistance (initial) .............................................. 10GΩ min at 500V DC EIA-364-21C: 2000 – Insulation Resistance (after conditioning*) ........................ >1GΩ min at 500V DC Creepage Distance (contact-to-contact) ................................................................ 0.15mm min Clearance Distance (contact-to-contact) ............................................................... 0.15mm min *excluding Salt Mist conditioning 2.3. ENVIRONMENTAL CHARACTERISTICS EIA-364-31B: 2000 - Humidity ................................................... 65/150/56 days at 93% RH EIA-364-32C: 2000 – Temperature Range ................................. Test Condition IV, Dwell 30mins, 5 cycles at -65°C to +150°C EIA-364-17B: 1999 – Temperature Life ...................................... Test Condition X, 150°C±5°C, Method A, without load EIA-364-26B: 1999 – Salt Mist .................................................. Test Condition B, 48 hours continuous exposure EIA-364-28D: 1999 – Vibration Severity ◊● .............................. Test Condition IV: 10Hz to 2000Hz,1.5mm, 198m/s² (20G) Duration = 2 Hours EIA-364-27B: 1996 – Shock Severity ◊● ............................... Test Condition E: 981m/s² (100G) for 6ms in Z axis, 490m/s² (50G) for 11ms in X & Y axes Bump Severity ◊......................................................................... 390m/s² (40G), 4,000±10 Bumps EIA-364-01A: 2000 – Acceleration Severity .............................. 490m/s² (50G) ◊ Latches or Screw-Loks fully utilized  X&Y tested at lower levels due to shaker limitations ● It is recommended that back-potting compound is applied to crimp assemblies for vibration at higher frequencies 2.4. MECHANICAL CHARACTERISTICS Durability................................................................................................................. 1000 operations Durability (Latches) ................................................................................................ 100 operations By hand or with Z125-926XX00 tools. Minimum added retention of 20N Screw-Lok Torque ................................................................................................... 16 to 18 cmN Scew-Lok Retention in Housing ............................................................................. 20.0N min Contact Retention in Housing (all contact types) ................................................. 6.0N min Signal Insertion Force (per contact, using mating contact).................................. 2.8N max Signal Withdrawal Force (per contact, using mating contact) ............................. 0.2N min Power Insertion Force (per contact, using mating contact) ................................. 7.0N max Power Withdrawal Force (per contact, using mating contact)............................. 0.2N min Latch Retention in Housing .................................................................................... 4.0N min 2.5 WIRE TERMINATION INFORMATION – SIGNAL CRIMP PRODUCTS Wire Type (recommended) .............................................BS 3G 210 type A, MIL-W-16878/6 type ET or NEMA HP3 type ET Maximum Insulation Diameter .......................................Ø0.80mm Insulation Strip Length ....................................................1.50-1.75mm -3- C12510 Issue: 10 C/Note: 30051 Date: 08.06.20 G125 COMPONENT SPECIFICATION C12510 Recommended Hand Crimp Tooling ...............................Hand Crimp Tool Z125-900, Positioner Z125-901, Insertion/Removal Tool Z125-902 Recommended potting compound is Stycast 2651MM with Catalyst 9. Wire Size Stranding (AWG) (No. x Ømm) Diameter Circular MIL Area (mm²) (mm) Area (CMA) Crimp Tool Setting 26 7 x 0.15 Ø0.533 0.128 253 6 28 7 x 0.13 Ø0.381 0.072 159 5 30 7 x 0.10 Ø0.305 0.057 100 5 32 7 x 0.08 Ø0.203 0.035 62 5 Crimp Height (mm) Min. pull-off force (N) 18 13 0.95-1.10 12 6 For information on crimping Gecko signal contacts refer to Tooling Instruction Sheet IS-37. For information on insertion/removal of Gecko signal cable contacts refer to Tooling Instruction Sheet IS38. There is also a Video on crimping and inserting Gecko contacts: https://www.harwin.com/harwintv 2.6 WIRE TERMINATION INFORMATION – POWER CRIMP PRODUCTS Wire Type (recommended) .............................................M22759/11-18 PTFE (MIL-W-22759/11) Maximum Insulation Diameter .......................................Ø1.35mm Insulation Strip Length ....................................................1.90-2.30mm Recommended Hand Crimp Tooling ...............................Hand Crimp Tool Z125-903, Positioner Z125-904, Insertion/Removal Tool Z125-905 Recommended potting compound is Stycast 2651MM with Catalyst 9. Wire Size (AWG) Stranding (No. x Ømm) Diameter (mm) Area (mm²) Circular MIL Area (CMA) Crimp Tool Setting Min. pull-off force (N) 18 19 x 0.25 Ø1.250 0.930 1624 8 85 For information on crimping Gecko-MT power contacts refer to Tooling Instruction Sheet IS-44. For information on insertion/removal of Gecko power contacts refer to Tooling Instruction Sheet IS-47. There is also a Video on crimping and inserting Gecko contacts: https://www.harwin.com/harwintv -4- C12510 Issue: 10 C/Note: 30051 Date: 08.06.20 G125 COMPONENT SPECIFICATION C12510 APPENDIX 1 APPENDIX 1.1. – GECKO-SL CONTACT NUMBERING No. 1 Contact mark No. 1 Contact mark 1 5 10 6 5 1 10 6 Female Crimp Housing Male Crimp Housing No. 1 Contact mark 1 6 No. 1 Contact mark 5 5 1 6 10 10 Female PCB mounted Male PCB mounted APPENDIX 1.2. – GECKO WITH LATCHES CONTACT NUMBERING No. 1 Contact mark No. 1 Contact mark 6 1 12 7 6 1 12 7 Female Crimp Housing Male Crimp Housing No. 1 Contact mark No. 1 Contact mark 6 1 1 6 12 7 7 12 Female PCB mounted Male PCB mounted -5- C12510 Issue: 10 C/Note: 30051 Date: 08.06.20 G125 COMPONENT SPECIFICATION C12510 APPENDIX 1.3. – GECKO-MT CONTACT NUMBERING No. 1 Contact mark 1 A 5 No. 1 Contact mark 8 B D C B A (02-08-02) (01-08-01) No. 1 Contact mark No. 1 Contact mark A 5 5 8 Male Crimp Housing Female Crimp Housing 1 1 4 4 4 4 1 8 8 B D C Female PCB mounted 5 B A Male PCB mounted (01-08-01) (02-08-02) -6- C12510 Issue: 10 C/Note: 30051 Date: 08.06.20