H9021-01

Customer Information Sheet NOT TO SCALE C IF IN DOUBT - ASK DRAWING No.: H9020-01 TO H9021-01 THIRD ANGLE PROJECTION DIM 'A' 3.18 ALL DIMENSIONS IN mm 7.65 2.34 1.60 0.51 TYP 1.63 1.17 1.57 2.26 NOTES: 1. UNLESS OTHERWISE STATED, TOLERANCES = 2.36 0.58 0.08 MGP 16 NAME ISS. 0.13. APPROVED: CHECKED: PART No. DIM 'A' BOARD THICKNESS PUNCH AND DIE TOOL H9020-01 2.39 2.35/2.45mm HOLE SIZE 1.60mm Z9020-00 H9021-01 3.18 2.35/2.45mm 2.40mm Z9021-00 09.02.22 31362 DATE CN/CO MGP RA DRAWN: J. KEIR CUSTOMER REF.: ASSEMBLY DRG: www.harwin.com technical @harwin.com THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = MATERIAL: TITLE: ANNEALED BRASS CW614N M TO BS EN 12164 FINISH: 100% TIN OVER NICKEL 5 UNLESS STATED S/AREA: mm² TERMINAL LUG DRAWING NUMBER: H9020-01 TO H9021-01 SHT 2 OF 2