M55-6005042R

Customer Information Sheet IF IN DOUBT - ASK DRAWING No.: M55-60XXX42R NOT TO SCALE C THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm DIM 'F' SPECIFICATIONS: MATERIAL: MOULDING & CAP = HIGH TEMP, LCP, UL94V-0 CONTACT = PHOSPHOR BRONZE RETAINING STRAP = BRASS PLATING: CONTACT = 0.025µm MIN GOLD OVER 2.03µm MIN NICKEL ON CONTACT AREA, 2.54µm MIN TIN OVER 1.27µm MIN NICKEL ON TAILS RETAINING STRAP = 2.45µm MIN TIN OVER 1.01µm MIN NICKEL DIM 'C' 1.00 0.05 TYP 1.27 TYP 1.27 7.20 ORDER CODE: CAP HAS BEEN HIDDEN FOR ILLUSTRATION PURPOSES ONLY. SEE NOTE 1 DIM 'B' M55-60XXX42R CONNECTOR HEIGHT: 0 = 6.25 1 = 9.05 2 = 13.65 CONTACT A1 DIM 'A' 1.45 CONTACT POINT DIM 'G' DIM 'D' 4.20 TOTAL No. OF CONTACTS: 12, 16, 20, 26, 32, 40, 50, 68, 80 3.05 PART SECTION X-X SEE NOTE 1 0.15 0.02 0.1 12 - 50 CONTACTS 0.15 68 - 80 CONTACTS 0.75 DIM 'E' 6.30 1.50 0.05 PART No. DIM 'A' DIM 'B' DIM 'C' DIM 'D' DIM 'E' DIM 'F' DIM 'G' M55-60X1242R 12.70 8.37 6.35 9.37 10.77 11.34 10.57 M55-60X1642R 15.24 10.91 8.89 11.91 13.31 13.88 13.11 M55-60X2042R 17.78 13.45 11.43 14.45 15.85 16.42 15.65 M55-60X2642R 21.59 17.26 15.24 18.26 19.66 20.23 19.46 M55-60X3242R 25.40 21.07 19.05 22.07 23.47 24.04 23.27 M55-60X4042R 30.48 26.15 24.13 27.15 28.55 29.12 28.35 M55-60X5042R 36.83 32.50 30.48 33.50 34.90 35.47 34.70 M55-60X6842R M55-60X8042R 0.45 0.05 TYP 48.26 55.88 43.93 51.55 41.91 44.93 49.53 52.55 46.33 53.95 46.90 54.52 MGP APPROVED: CHECKED: 13.07.22 31688 DATE CN/CO MGP MR DRAWN: 46.13 M.PERREN CUSTOMER REF.: 53.75 ASSEMBLY DRG: 1.50 0.05 NOTES: 1. SEE ORDER CODE AND SHEET 5 FOR CONNECTOR HEIGHT AND CAP DETAILS. SEE SHEET 7 FOR RECOMMENDED PCB LAYOUTS. 2. FOR TAPE AND REEL DETAILS, SEE SHEET 6. 3. ALL TOLERANCES ARE 0.20, UNLESS OTHERWISE STATED. 4. FOR COMPLETE SPECIFICATION SEE COMPONENT SPECIFICATION C047XX (LATEST ISSUE). 7 NAME ISS. www.harwin.com technical @harwin.com THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = MATERIAL: TITLE: 1.27mm PITCH VERTICAL FEMALE CONNECTOR SEE ABOVE FINISH: DRAWING NUMBER: SEE ABOVE 5 UNLESS STATED S/AREA: mm² M55-60XXX42R SHT 4 OF 7 Customer Information Sheet IF IN DOUBT - ASK DRAWING No.: M55-60XXX42R NOT TO SCALE C THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm CONNECTOR HEIGHT DETAILS M55-600XX42R 4.75 8.00 7.50 6.25 1.05 M55-601XX42R 4.75 8.00 9.05 10.30 3.85 M55-602XX42R 8.00 4.75 MGP 7 NAME ISS. 13.65 14.90 APPROVED: CHECKED: 13.07.22 31688 DATE CN/CO MGP MR DRAWN: 8.45 M.PERREN CUSTOMER REF.: ASSEMBLY DRG: NOTES: 1. ALL TOLERANCES ARE 0.20, UNLESS OTHERWISE STATED. www.harwin.com technical @harwin.com THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = MATERIAL: TITLE: 1.27mm PITCH VERTICAL FEMALE CONNECTOR SEE SHEET 4 FINISH: DRAWING NUMBER: SEE SHEET 4 5 UNLESS STATED S/AREA: mm² M55-60XXX42R SHT 5 OF 7 Customer Information Sheet TAPE DETAILS FOR 12 & 16 CONTACTS ONLY 12.00 TYP 2.00 TYP 1.75 NOT TO SCALE C IF IN DOUBT - ASK DRAWING No.: M55-60XXX42R 1.50 TYP THIRD ANGLE PROJECTION 12.00 TYP 4.00 TYP ALL DIMENSIONS IN mm TAPE DETAILS FOR 20 TO 80 CONTACTS ONLY 2.00 TYP 1.75 4.00 TYP 1.50 TYP DIM 'B' DIM 'B' DIM 'C' DIM 'A' DIM 'C' DIM 'A' DIM 'D' SECTION Y-Y SECTION Y-Y DIM 'E' DIM 'F' SEE DETAIL ' A' SECTION X-X ORDER CODE: M55-60XXX42R DIM 'E' CONNECTOR HEIGHT: 0 = 6.25 1 = 9.05 2 = 13.65 TOTAL No. OF CONTACTS: 12, 16, 20, 26, 32, 40, 50, 68, 80 DIM 'F' ROUND HOLES THIS SIDE SECTION FINISHED REELING DIRECTION X-X 1.50 TYP TABLE 1 1.70 TYP DIMENSION PART No. 300 DIM 'A' 0.30 DIM 'B' DIM 'C' 0.15 DIM 'D' 24.00 11.50 12.90 N/A M55-60X1242R M55-60X1642R M55-60X2042R 100 MIN M55-60X3242R 32.00 14.20 18.00 28.40 APPROVED: TABLE 2 44.00 20.20 21.79 40.40 PART No. M55-60X6842R +0.5 13.0 -0.2 NOTES: 1. PRODUCT IS TAPE AND REELED IN GENERAL ACCORDANCE WITH EIA-481 (ELECTRONIC INDUSTRIES ASSOCIATION). 2. FOR CONNECTOR DETAILS, SEE SHEET 4 & 5. M55-60X8042R www.harwin.com technical @harwin.com 56.00 26.20 72.00 34.20 37.03 48.46 56.08 THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. 52.40 68.40 = = = = PACK QTY DIM 'F' M55-600XX42R 7.8 9.0 550 M55-601XX42R 10.6 11.7 400 M55-602XX42R 15.2 16.4 200 TOLERANCES X. X.X X.XX X.XXX CHECKED: DIMENSION DIM 'E' M55-60X4042R M55-60X5042R 7 NAME ISS. M55-60X2642R REEL DETAILS MGP DETAIL 'A' 1mm 0.50mm 0.20mm 0.01mm ANGLES = MATERIAL: 31688 DATE CN/CO MGP MR DRAWN: M.PERREN CUSTOMER REF.: ASSEMBLY DRG: TITLE: 1.27mm PITCH VERTICAL FEMALE CONNECTOR SEE SHEET 4 FINISH: 13.07.22 DRAWING NUMBER: SEE SHEET 4 5 UNLESS STATED S/AREA: mm² M55-60XXX42R SHT 6 OF 7 Customer Information Sheet IF IN DOUBT - ASK DRAWING No.: M55-60XXX42R NOT TO SCALE C THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm ROUND AND POLARIZED RECOMMENDED PCB LAYOUTS OPTIONS RECOMMENDED ROUND HOLE PCB LAYOUT TOLERANCE = 0.05 RECOMMENDED POLARIZED HOLE PCB LAYOUT TOLERANCE = 0.05 DIM 'F' 1.20 TYP DIM 'F' DIM 'C' DIM 'C' 1.20 TYP 1.27 TYP 1.27 TYP R0.50 2 x 7.60 2.20 1.90 1.65 5.50 7.60 2.20 1.00 1.95 5.50 1.65 R0.825 1.10 TYP 1.10 TYP 0.285 0.80 TYP 2.21 0.285 2.21 CONTACT A1 0.80 TYP DIM 'E2' DIM 'E1' PART No. ORDER CODE: M55-60XXX42R CONNECTOR HEIGHT: 0 = 6.25 1 = 9.05 2 = 13.65 DIM 'C' DIM 'E1' DIM 'E2' DIM 'F' M55-60X1242R 6.35 10.77 10.70 11.34 M55-60X1642R 8.89 13.31 13.24 13.88 M55-60X2042R 11.43 15.85 15.78 16.42 M55-60X2642R 15.24 19.66 19.59 20.23 M55-60X3242R 19.05 23.47 23.40 24.04 M55-60X4042R TOTAL No. OF CONTACTS: 12, 16, 20, 26, 32, 40, 50, 68, 80 www.harwin.com technical @harwin.com THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. 24.13 28.55 28.48 30.48 34.90 34.83 35.47 M55-60X6842R 41.91 46.33 46.26 46.90 M55-60X8042R 49.53 53.95 53.88 54.52 X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = MATERIAL: CHECKED: 13.07.22 31688 DATE CN/CO MGP MR DRAWN: M.PERREN CUSTOMER REF.: ASSEMBLY DRG: TITLE: 1.27mm PITCH VERTICAL FEMALE CONNECTOR SEE ABOVE FINISH: 7 APPROVED: 29.12 M55-60X5042R TOLERANCES MGP NAME ISS. DRAWING NUMBER: SEE ABOVE 5 UNLESS STATED S/AREA: mm² M55-60XXX42R SHT 7 OF 7