M55-6028042R

Customer Information Sheet IF IN DOUBT - ASK C NOT TO SCALE THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm DIM 'F' DIM 'C' SPECIFICATIONS: MATERIAL: MOULDING & CAP = HIGH TEMP, LCP, UL94V-0 CONTACT = PHOSPHOR BRONZE RETAINING STRAP = BRASS PLATING: CONTACT = 0.025µm MIN GOLD OVER 2.03µm MIN NICKEL ON CONTACT AREA, 2.54µm MIN TIN OVER 1.27µm MIN NICKEL ON TAILS RETAINING STRAP = 2.45µm MIN TIN OVER 1.01µm MIN NICKEL 1.00 0.05 TYP 1.27 TYP 1.27 7.20 CONTACT A1 ORDER CODE: CAP HAS BEEN HIDDEN FOR ILLUSTRATION PURPOSES ONLY. SEE NOTE 1 DIM 'B' CONNECTOR HEIGHT: 0 = 6.25 1 = 9.05 2 = 13.65 DIM 'A' DIM 'G' DIM 'D' 1.45 CONTACT POINT X M55-60XXX42R 4.20 TOTAL No. OF CONTACTS: 12, 16, 20, 26, 32, 40, 50, 68, 80 3.05 PART SECTION X-X SEE NOTE 1 X 0.15 0.02 0.1 12 - 50 CONTACTS 0.15 68 - 80 CONTACTS 0.75 DIM 'E' 6.30 1.50 0.05 0.45 0.05 TYP PART No. DIM 'A' DIM 'B' DIM 'C' DIM 'D' DIM 'E' DIM 'F' DIM 'G' M55-60X1242R M55-60X1642R M55-60X2042R M55-60X2642R M55-60X3242R M55-60X4042R M55-60X5042R M55-60X6842R M55-60X8042R 12.70 15.24 17.78 21.59 25.40 30.48 36.83 48.26 55.88 8.37 10.91 13.45 17.26 21.07 26.15 32.50 43.93 51.55 6.35 8.89 11.43 15.24 19.05 24.13 30.48 41.91 49.53 9.37 11.91 14.45 18.26 22.07 27.15 33.50 44.93 52.55 10.77 13.31 15.85 19.66 23.47 28.55 34.90 46.33 53.95 11.34 13.88 16.42 20.23 24.04 29.12 35.47 46.90 54.52 10.57 13.11 15.65 19.46 23.27 28.35 34.70 46.13 53.75 MGP 03.08.23 32860 DATE CN/CO APPROVED: MGP CHECKED: AB DRAWN: M.PERREN ASSEMBLY DRG: 1.50 0.05 NOTES: 1. SEE ORDER CODE AND SHEET 5 FOR CONNECTOR HEIGHT AND CAP DETAILS. SEE SHEET 7 FOR RECOMMENDED PCB LAYOUTS. 2. FOR TAPE AND REEL DETAILS, SEE SHEET 6. 3. ALL TOLERANCES ARE 0.20, UNLESS OTHERWISE STATED. 4. FOR COMPLETE SPECIFICATION SEE COMPONENT SPECIFICATION C047XX (LATEST ISSUE). 8 NAME ISS. TOLERANCES X. = 1mm X.X = 0.50mm X.XX = 0.20mm X.XXX = 0.01mm www.harwin.com ANGLES = 5 UNLESS STATED THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. MATERIAL: SEE ABOVE TITLE: 1.27mm PITCH VERTICAL FEMALE CONNECTOR DRAWING NUMBER: M55-60XXX42R SHT 4 OF 7 Customer Information Sheet IF IN DOUBT - ASK C NOT TO SCALE THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm CONNECTOR HEIGHT DETAILS M55-600XX42R 8.00 SEE NOTE 2 4.75 7.50 6.25 1.05 M55-601XX42R 8.00 SEE NOTE 2 4.75 9.05 10.30 3.85 M55-602XX42R 8.00 SEE NOTE 2 4.75 13.65 14.90 MGP 8 NAME ISS. 8.45 03.08.23 32860 DATE CN/CO APPROVED: MGP CHECKED: AB DRAWN: M.PERREN ASSEMBLY DRG: TOLERANCES NOTES: 1. ALL TOLERANCES ARE 0.20, UNLESS OTHERWISE STATED. 2. PICK & PLACE CAP POSITIONED CENTRAL 1.6mm TO MOULDING DIM 'A, SEE SHEET 4. X. = 1mm X.X = 0.50mm X.XX = 0.20mm X.XXX = 0.01mm www.harwin.com ANGLES = 5 UNLESS STATED THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. MATERIAL: SEE SHEET 4 TITLE: 1.27mm PITCH VERTICAL FEMALE CONNECTOR DRAWING NUMBER: M55-60XXX42R SHT 5 OF 7 Customer Information Sheet IF IN DOUBT - ASK TAPE DETAILS FOR 12 & 16 CONTACTS ONLY 1.75 12.00 TYP 2.00 TYP 1.50 TYP NOT TO SCALE 12.00 TYP 4.00 TYP Y C 1.75 THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm TAPE DETAILS FOR 20 TO 80 CONTACTS ONLY 2.00 TYP 1.50 TYP 4.00 TYP Y DIM 'B' DIM 'B' DIM 'C' DIM 'A' X DIM 'A' DIM 'C' X DIM 'D' SECTION Y-Y X X Y SECTION Y-Y DIM 'E' DIM 'F' ORDER CODE: Y SEE DETAIL 'A' SECTION X-X M55-60XXX42R DIM 'E' CONNECTOR HEIGHT: 0 = 6.25 1 = 9.05 2 = 13.65 TOTAL No. OF CONTACTS: 12, 16, 20, 26, 32, 40, 50, 68, 80 DIM 'F' ROUND HOLES THIS SIDE FINISHED REELING DIRECTION PART No. 300 100 MIN REEL DETAILS 13.0+0.5 -0.2 NOTES: 1. PRODUCT IS TAPE AND REELED IN GENERAL ACCORDANCE WITH EIA-481 (ELECTRONIC INDUSTRIES ASSOCIATION). 2. FOR CONNECTOR DETAILS, SEE SHEET 4 & 5. M55-60X1242R M55-60X1642R M55-60X2042R M55-60X2642R M55-60X3242R M55-60X4042R M55-60X5042R M55-60X6842R M55-60X8042R SECTION X-X TABLE 1 DIMENSION DIM 'A' DIM 'C' DIM 'B' 0.30 0.15 1.50 TYP DIM 'D' 24.00 11.50 12.90 N/A 32.00 14.20 18.00 28.40 44.00 20.20 56.00 26.20 72.00 34.20 21.79 37.03 48.46 56.08 TOLERANCES X. = 1mm X.X = 0.50mm X.XX = 0.20mm X.XXX = 0.01mm www.harwin.com ANGLES = 5 UNLESS STATED 1.70 TYP 40.40 52.40 68.40 DETAIL 'A' PART No. M55-600XX42R M55-601XX42R M55-602XX42R THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. TABLE 2 DIMENSION DIM 'E' DIM 'F' 7.8 9.0 10.6 11.7 15.2 16.4 MATERIAL: SEE SHEET 4 MGP 8 NAME ISS. PACK QTY TITLE: 550 400 200 APPROVED: CHECKED: 03.08.23 32860 DATE CN/CO MGP AB DRAWN: M.PERREN ASSEMBLY DRG: 1.27mm PITCH VERTICAL FEMALE CONNECTOR DRAWING NUMBER: M55-60XXX42R SHT 6 OF 7 Customer Information Sheet IF IN DOUBT - ASK C NOT TO SCALE THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm ROUND AND POLARIZED RECOMMENDED PCB LAYOUTS OPTIONS RECOMMENDED ROUND HOLE PCB LAYOUT TOLERANCE = 0.05 RECOMMENDED POLARIZED HOLE PCB LAYOUT TOLERANCE = 0.05 DIM 'F' 1.20 TYP DIM 'F' DIM 'C' DIM 'C' 1.20 TYP 1.27 TYP 1.27 TYP R0.50 2x 7.60 1.65 5.50 2.20 7.60 1.00 2.20 1.90 1.95 1.65 5.50 R0.825 1.10 TYP 1.10 TYP 0.285 0.80 TYP 2.21 0.285 2.21 CONTACT A1 0.80 TYP DIM 'E2' DIM 'E1' ORDER CODE: M55-60XXX42R CONNECTOR HEIGHT: 0 = 6.25 1 = 9.05 2 = 13.65 TOTAL No. OF CONTACTS: 12, 16, 20, 26, 32, 40, 50, 68, 80 TOLERANCES X. = 1mm X.X = 0.50mm X.XX = 0.20mm X.XXX = 0.01mm www.harwin.com ANGLES = 5 UNLESS STATED PART No. DIM 'C' M55-60X1242R M55-60X1642R M55-60X2042R M55-60X2642R M55-60X3242R M55-60X4042R M55-60X5042R M55-60X6842R M55-60X8042R 6.35 8.89 11.43 15.24 19.05 24.13 30.48 41.91 49.53 THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. DIM 'E1' DIM 'E2' 10.77 13.31 15.85 19.66 23.47 28.55 34.90 46.33 53.95 10.70 13.24 15.78 19.59 23.40 28.48 34.83 46.26 53.88 MATERIAL: SEE SHEET 4 DIM 'F' 11.34 13.88 16.42 20.23 24.04 29.12 35.47 46.90 54.52 TITLE: MGP 8 NAME ISS. APPROVED: CHECKED: 03.08.23 32860 DATE CN/CO MGP AB DRAWN: M.PERREN ASSEMBLY DRG: 1.27mm PITCH VERTICAL FEMALE CONNECTOR DRAWING NUMBER: M55-60XXX42R SHT 7 OF 7