M55-7025042R

Customer Information Sheet IF IN DOUBT - ASK C NOT TO SCALE THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm DIM 'F' DIM 'D' SPECIFICATIONS: MATERIAL: MOULDING & CAP = HIGH TEMP, LCP, UL94V-0 CONTACT = PHOSPHOR BRONZE RETAINING STRAP = BRASS PLATING: CONTACT = 0.025µm MIN GOLD OVER 2.03µm MIN NICKEL ON CONTACT AREA, 2.54µm MIN TIN OVER 1.27µm MIN NICKEL ON TAILS RETAINING STRAP = 2.45µm MIN TIN OVER 1.01µm MIN NICKEL DIM 'C' 1.27 TYP CAP HAS BEEN HIDDEN FOR ILLUSTRATION PURPOSES ONLY. SEE NOTE 1 CONTACT A1 DIM 'B' 4.20 ORDER CODE: 3.25 DIM 'A' X DIM 'G' CONNECTOR HEIGHT: 0 = 6.75mm 1 = 8.25mm 2 = 9.85mm 1.27 PART SECTION X-X M55-70XXX42R TOTAL No. OF CONTACTS: 12, 16, 20, 26, 32, 40, 50, 68, 80 5.00 4.00 SEE NOTE 1 0.30 0.02 0.10 12 - 50 CONTACTS 0.15 68 - 80 CONTACTS X 0.75 DIM 'E' 1.50 0.05 5.80 7.20 1.00 0.05 TYP 1.50 0.05 0.50 0.05 TYP NOTES: 1. SEE ORDER CODE AND SHEET 5 FOR CONNECTOR HEIGHT AND CAP DETAILS. SEE SHEET 7 FOR RECOMMENDED PCB LAYOUTS. 2. FOR TAPE AND REEL DETAILS, SEE SHEET 6. 3. ALL TOLERANCES ARE 0.20, UNLESS OTHERWISE STATED. 4. COMPLETE SPECIFICATION PLEASE SEE COMPONENT SPECIFICATION C047XX (LATEST ISSUE). PART No. DIM 'A' DIM 'B' DIM 'C' DIM 'D' DIM 'E' DIM 'F' DIM 'G' M55-70X1242R M55-70X1642R M55-70X2042R M55-70X2642R M55-70X3242R M55-70X4042R M55-70X5042R M55-70X6842R M55-70X8042R 12.70 15.24 17.78 21.59 25.40 30.48 36.83 48.26 55.88 8.57 11.11 13.65 17.46 21.27 26.35 32.70 44.13 51.75 6.35 8.89 11.43 15.24 19.05 24.13 30.48 41.91 49.53 9.57 12.11 14.65 18.46 22.27 27.35 33.70 45.13 52.75 10.77 13.31 15.85 19.66 23.47 28.55 34.90 46.33 53.95 11.34 13.88 16.42 20.23 24.04 29.12 35.47 46.90 54.52 10.37 12.91 15.45 19.26 23.07 28.15 34.50 45.93 53.55 TOLERANCES X. = 1mm X.X = 0.50mm X.XX = 0.20mm X.XXX = 0.01mm www.harwin.com ANGLES = 5 UNLESS STATED THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. MATERIAL: SEE ABOVE TITLE: MGP 8 NAME ISS. 03.08.23 32860 DATE CN/CO APPROVED: MGP CHECKED: AB DRAWN: M.PERREN ASSEMBLY DRG: 1.27mm PITCH VERTICAL MALE CONNECTOR DRAWING NUMBER: M55-70XXX42R SHT 4 OF 7 Customer Information Sheet IF IN DOUBT - ASK C NOT TO SCALE THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm CONNECTOR HEIGHT DETAILS M55-700XX42R 5.90 8.00 SEE NOTE 2 8.00 6.75 M55-701XX42R 5.90 8.00 SEE NOTE 2 9.50 8.25 M55-702XX42R 5.90 8.00 SEE NOTE 2 11.10 MGP 9.85 8 NAME ISS. APPROVED: CHECKED: 03.08.23 32860 DATE CN/CO MGP AB DRAWN: M.PERREN ASSEMBLY DRG: TOLERANCES NOTES: 1. ALL TOLERANCES ARE 0.20, UNLESS OTHERWISE STATED. 2. PICK & PLACE CAP POSITIONED CENTRAL 1.6mm TO MOULDING DIM 'A, SEE SHEET 4. X. = 1mm X.X = 0.50mm X.XX = 0.20mm X.XXX = 0.01mm www.harwin.com ANGLES = 5 UNLESS STATED THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. MATERIAL: SEE SHEET 4 TITLE: 1.27mm PITCH VERTICAL MALE CONNECTOR DRAWING NUMBER: M55-70XXX42R SHT 5 OF 7 Customer Information Sheet IF IN DOUBT - ASK TAPE DETAILS FOR 12 & 16 CONTACTS ONLY NOT TO SCALE THIRD ANGLE PROJECTION 12.00 TYP 12.00 TYP 1.75 C 1.75 2.00 TYP 4.00 TYP X 2.00 TYP 4.00 TYP X ALL DIMENSIONS IN mm TAPE DETAILS FOR 20 TO 80 CONTACTS ONLY 1.50 TYP 1.50 TYP DIM 'B' DIM 'B' DIM 'C' Y DIM 'C' DIM 'A' Y Y DIM 'A' Y DIM 'D' SECTION X-X SECTION X-X X X DIM 'E' SEE DETAIL 'A' DIM 'F' DIM 'E' ORDER CODE: SECTION Y-Y DIM 'F' FINISHED REELING DIRECTION M55-70XXX42R CONNECTOR HEIGHT: 0 = 6.75mm 1 = 8.25mm 2 = 9.85mm SECTION Y-Y 1.50 TYP TOTAL No. OF CONTACTS: 12, 16, 20, 26, 32, 40, 50, 68, 80 100 MIN PART No. 300 ROUND HOLES THIS SIDE REEL DETAILS M55-70X1242R M55-70X1642R M55-70X2042R M55-70X2642R M55-70X3242R M55-70X4042R M55-70X5042R M55-70X6842R M55-70X8042R TABLE 1 DIMENSION DIM 'A' DIM 'C' DIM 'B' 0.30 0.15 24.00 11.50 12.90 N/A 32.00 14.20 18.00 28.40 44.00 20.20 56.00 26.20 72.00 34.20 13.0+0.5 -0.2 NOTES: 1. PRODUCT IS TAPE AND REELED IN GENERAL ACCORDANCE WITH EIA-481 (ELECTRONIC INDUSTRIES ASSOCIATION). 2. FOR CONNECTOR DETAILS, SEE SHEET 4 & 5. DIM 'D' 21.79 40.40 37.03 48.46 56.08 52.40 68.40 TOLERANCES X. = 1mm X.X = 0.50mm X.XX = 0.20mm X.XXX = 0.01mm www.harwin.com ANGLES = 5 UNLESS STATED 1.70 TYP PART No. M55-700XX42R M55-701XX42R M55-702XX42R THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. DETAIL 'A' TABLE 2 DIMENSION DIM 'E' DIM 'F' 8.3 9.5 9.8 11.0 11.4 12.6 MATERIAL: SEE SHEET 4 MGP PACK QTY 500 450 300 TITLE: 8 NAME ISS. APPROVED: CHECKED: 03.08.23 32860 DATE CN/CO MGP AB DRAWN: M.PERREN ASSEMBLY DRG: 1.27mm PITCH VERTICAL MALE CONNECTOR DRAWING NUMBER: M55-70XXX42R SHT 6 OF 7 Customer Information Sheet IF IN DOUBT - ASK C NOT TO SCALE THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm ROUND AND POLARIZED RECOMMENDED PCB LAYOUTS OPTIONS RECOMMENDED ROUND HOLE PCB LAYOUT TOLERANCE = 0.05 RECOMMENDED POLARIZED HOLE PCB LAYOUT TOLERANCE = 0.05 DIM 'F' 1.20 DIM 'F' DIM 'C' 1.20 DIM 'C' 1.27 TYP 2x 7.60 2.20 1.27 TYP R0.50 1.90 1.65 5.50 7.60 1.65 2.20 1.95 1.00 5.50 CONTACT A1 R0.825 1.10 0.285 1.10 0.285 0.80 TYP 2.21 2.21 0.80 TYP DIM 'E2' DIM 'E1' ORDER CODE: M55-70XXX42R CONNECTOR HEIGHT: 0 = 6.75mm 1 = 8.25mm 2 = 9.85mm TOTAL No. OF CONTACTS: 12, 16, 20, 26, 32, 40, 50, 68, 80 TOLERANCES X. = 1mm X.X = 0.50mm X.XX = 0.20mm X.XXX = 0.01mm www.harwin.com ANGLES = 5 UNLESS STATED PART No. DIM 'C' M55-70X1242R M55-70X1642R M55-70X2042R M55-70X2642R M55-70X3242R M55-70X4042R M55-70X5042R M55-70X6842R M55-70X8042R 6.35 8.89 11.43 15.24 19.05 24.13 30.48 41.91 49.53 THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. DIM 'E1' DIM 'E2' 10.77 13.31 15.85 19.66 23.47 28.55 34.90 46.33 53.95 10.70 13.24 15.78 19.59 23.40 28.48 34.83 46.26 53.88 MATERIAL: SEE SHEET 4 DIM 'F' 11.34 13.88 16.42 20.23 24.04 29.12 35.47 46.90 54.52 TITLE: MGP 8 NAME ISS. 03.08.23 32860 DATE CN/CO APPROVED: MGP CHECKED: AB DRAWN: M.PERREN ASSEMBLY DRG: 1.27mm PITCH VERTICAL MALE CONNECTOR DRAWING NUMBER: M55-70XXX42R SHT 7 OF 7