M80-2530045

Customer Information Sheet DRAWING No.: M80-25300XX & M80-25400XX SHT 5 OF 5 IF IN DOUBT - ASK C NOT TO SCALE THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm SPECIFICATION: MATERIAL: BERYLLIUM COPPER 3.00 FINISH: 45 = 0.3µ MIN GOLD, ALL OVER 42 = 3µ MIN 100% TIN AND 0.3µ MIN GOLD, SELECTIVE PLATE ALL FINISHES = NICKEL UNDERPLATE MECHANICAL: INSERTION FORCE = 2.8N MAX, 1.0N MIN WITHDRAWAL FORCE = 1.8N MAX, 0.2N MIN DURABILITY = 500 OPERATIONS ENVIRONMENTAL: OPERATING TEMPERATURE = -55 C TO +125 C PACKING: REEL (AS SHOWN), 15K/REEL TIN MINIMUM (42 FINISH) 1.00 0.25 MAX (CUT-OFF TAB) GOLD MINIMUM (42 FINISH) 1.17 0.15 GOLD MINIMUM (45 FINISH) FOR COMPLETE CONNECTOR SPECIFICATION, SEE COMPONENT SPECIFICATION C040XX (LATEST ISSUE) 4.30 1.60 REELING DETAIL 30 2.0 1.30 X Y 2.10 6.68 3.50 SECTION X-X 2.2 SECTION Y-Y 'A' 0.25 600 'B' 0.25 X REEL Y R0.55 R0.45 NOTES: 1. TO BE USED WITH THE FOLLOWING FEMALE HOUSING: M80-454XX98 = HOUSING ONLY M80-455XX98 = HOUSING + SLOTTED JACKSCREW M80-456XX98 = HOUSING + HEX SOCKET JACKSCREW M80-457XX98 = HOUSING + REVERSE FIX JACKSCREW M80-458XX98 = HOUSING + GUIDE AND BOARD MOUNT 2. SUITABLE FOR PTFE INSULATED EQUIPMENT WIRE TO BS 3G 210 TYPE A, WIRE 22-28 AWG, WIRE INSULATION 0.6mm- 1.1mm. 3. STRIP WIRE BY 2.5-3.0mm FOR CRIMPING. 4. SUITABLE FOR PROCESSING WITH LEFT SIDE FEED CRIMPING PRESS. CONTACT datamate @harwin.com FOR DETAILS. 5. CONTACTS ARE AVAILABLE LOOSE, PART NUMBER M80-28300XX FOR 24-22 AWG WIRE AND M80-28400XX FOR 28-26 AWG WIRE, SUITABLE FOR PROCESSING WITH HAND CRIMP TOOL Z80-255. THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. DIMENSION PART No. 'A' M80-25300XX M80-25400XX ORDER CODE: 1.80 1.34 'B' 1.65 1.00 CONTACTS BMK D 19.09.08 DATE BMK RA 10159 C/NOTE M80-XXX00XX WIRE SIZE: 253 = 24-22 AWG (0.22-0.34mm²) 254 = 28-26 AWG (0.08-0.12mm²) FINISH: 45 = GOLD, ALL OVER 42 = 100% TIN & GOLD, SELECTIVE NAME ISS. APPROVED: CHECKED: DRAWN: B. M. KENT CUSTOMER REF.: SEE DETAIL D DETAIL D INTERLEAVE PAPER HARWIN USA TEL: 603 893 5376 FAX: 603 893 5396 mis@harwin.com ASSEMBLY DRG: TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.25mm 0.10mm 0.01mm 5 MATERIAL: SEE ABOVE TITLE: HARWIN Europe (UK) HARWIN Asia TEL: 023 9231 4545 TEL: +65 6 779 4909 FAX: 023 9231 4590 FAX: +65 6 779 3868 mis@harwin.co.uk mis@harwin.com.sg DATAMATE TRIO-TEK FEMALE CRIMP CONTACT REELED 24-22 AWG & 28-26 AWG M80-25300XX & M80-25400XX SHT 5 OF 5 FINISH: S/AREA: SEE ABOVE mm² DRAWING NUMBER: ANGLES = UNLESS STATED