M80-301

Customer Information Sheet DRAWING No.: M80-301 TO M80-302 IF IN DOUBT - ASK 4.60 0.05 NOT TO SCALE C THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm 0.30 0.05 0 -0.10 SQUARE 3.00 DIM 'A' 2.00 1.00 1.00 2.00 INNER CONTACT INSULATOR PART No. DIM 'A' M80-301 3.00 MGP M80-302 4.50 NAME ISS. 7 05.07.22 31678 DATE CN/CO SECTION X-X APPROVED: BODY CHECKED: NOTES: 1. CONNECTORS COMES SUPPLIED ASSEMBLED. 2. RECOMMENDED PCB HOLE SIZE = 0.60mm MIN. 3. FOR FULL SPECIFICATION SEE COMPONENT SPECIFICATION C005XX (LATEST ISSUE). www.harwin.com technical @harwin.com THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = MATERIAL: S/AREA: ASSEMBLY DRG: DATAMATE MIX-TEK COAX CONTACT FEMALE VERTICAL PC-TAIL DRAWING NUMBER: GOLD 5 UNLESS STATED B. M. KENT CUSTOMER REF.: TITLE: COPPER ALLOY WITH PTFE INSULATOR FINISH: DRAWN: MGP RTP mm² M80-301 TO M80-302 SHT 2 OF 2