M80-8282642

Customer Information Sheet DRAWING No.: M80-828XXXX IF IN DOUBT - ASK NOT TO SCALE C THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm TOTAL No. OF CONTACTS + 4.10 MAX SPECIFICATIONS: MATERIAL: MOULDING = G-F PPS UL94V-0, BLACK CONTACTS = PHOSPHOR BRONZE FINISH: CONTACTS: ALL FINISHES = NICKEL UNDERCOAT 22 = 0.75µm GOLD ON CONTACT AREA, 3.0µm 90/10 TIN/LEAD ON TAILS 42 = 0.75µm GOLD ON CONTACT AREA, 3.0µm 100% TIN ON TAILS 45 = 0.75µm GOLD ALL OVER LATCH = 1.25µm NICKEL PACKING: TUBE FOR COMPLETE SPECIFICATION, SEE COMPONENT SPECIFICIATION C005XX (LATEST ISSUE) 5.20 MAX 2.00 1.00 MAX 5.60 MAX 7.50 0.36 MAX SECTION X-X TOTAL No. OF CONTACTS - 2 A 0.50 TYP 0.2 RECOMMENDED PCB LAYOUT TOLERANCE 0.05mm ORDER CODE: TOTAL No. OF CONTACTS - 2 4 x 0.95 TYP STRAIN RELIEF STRAP HOLES (OPTIONAL) 2.25 TYP M80-828XXXX MGP 16 NAME ISS. TOTAL No. OF CONTACTS: 04, 06, 08, 10, 12, 14, 16, 18, 20, 26, 34 2.38 TYP APPROVED: CHECKED: DRAWN: FINISH: 22 - SELECTIVE GOLD + TIN/LEAD 42 - SELECTIVE GOLD + 100% TIN 45 - GOLD NOTES: 1 .2-OFF STRAIN-RELIEF STRAPS M80-0030006 MAY BE USED WITH THIS CONNECTOR. 8.00 3.20 TYP 2.00 TYP 1.00 TYP www.harwin.com technical @harwin.com THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = MATERIAL: TITLE: SEE ABOVE FINISH: UNLESS STATED S/AREA: mm² 31413 DATE CN/CO MGP RA A.LIOTTA CUSTOMER REF.: ASSEMBLY DRG: DATAMATE L-TEK MALE DIL VERTICAL SMT ASSEMBLY - LATCHED DRAWING NUMBER: SEE ABOVE 5 10.03.22 M80-828XXXX SHT 2 OF 2