M80-PF5

Customer Information Sheet DRAWING No.: M80-PF5 IF IN DOUBT - ASK SPECIFICATIONS: MATERIALS: BODY = COPPER ALLOY LATCHING COLLAR = BERYLLIUM COPPER FINISH: BODY = 0.76µm MIN GOLD OVER NICKEL LATCHING COLLAR = NICKEL FOR COMPLETE SPECIFICATION SEE COMPONENT SPECIFICATION C005XX (LATEST ISSUE) NOT TO SCALE C THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm 13.55 2.80 0.03 6.50 6.45 PART SECTION 0.50 X-X 5.50 0.05 2.95 0.05 SQUARE 2.90 0.05 3.38 0.02 MGP 3 09.03.22 31425 DATE CN/CO NAME ISS. SOLDER CUP APPROVED: NOTES: 1. STRIP WIRE BY 5.0mm. 2. CONTACT EXTRACTION TOOL = Z80-290. 3. FOR ALL OTHER ELECTRICAL/MECHANICAL REQUIREMENTS, SEE COMPONENT SPECIFICATION C005XX (LATEST ISSUE). 4. MAX WIRE CONDUCTOR SIZE = 2.9mm / 10 AWG (37/0.26). MAX WIRE INSULATION DIAMETER 3.8mm. www.harwin.com technical @harwin.com THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = MATERIAL: TITLE: SEE ABOVE FINISH: UNLESS STATED S/AREA: DRAWN: mm² MARK G PLESTED CUSTOMER REF.: ASSEMBLY DRG: DATAMATE MIX-TEK HIGH POWER CONTACT FEMALE STRAIGHT SOLDER DRAWING NUMBER: SEE ABOVE 5 MGP CHECKED: RA M80-PF5 SHT 2 OF 2