R30-3013502

Customer Information Sheet DRAWING No.: NOT TO SCALE C IF IN DOUBT - ASK R30-301XX02 THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm L2 MAX 8.00 3.10 MAX M3 x 0.5 5.0 A/F 4.8 M3 x 0.5 1.25 MAX L3 MIN L1 UP TO 12mm OVER 12mm PART No. L1 L3 PART No. L1 L2 L3 R30-3010402 4.00 4.0 2.50 R30-3011602 16.00 12.0 8.00 R30-3010602 6.00 6.0 4.00 R30-3012002 20.00 12.0 8.00 R30-3010502 R30-3010702 R30-3010802 R30-3010902 5.00 7.00 8.00 9.00 L2 0.10 0.15 5.0 7.0 8.0 9.0 R30-3011002 10.00 10.0 R30-3011202 12.00 12.0 R30-3011102 R30-3011302 R30-3011402 R30-3011502 11.00 13.00 14.00 15.00 11.0 12.0 12.0 12.0 3.00 5.00 5.00 5.00 5.00 8.00 8.00 8.00 8.00 8.00 www.harwin.com technical @harwin.com R30-3011802 R30-3012302 R30-3012502 R30-3012802 R30-3013002 R30-3013302 R30-3013402 R30-3013502 R30-3014002 R30-3015002 18.00 23.00 25.00 28.00 30.00 33.00 34.00 35.00 40.00 50.00 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = 5 UNLESS STATED MGP 14 NAME ISS. APPROVED: ORDER CODE: R30-301XX02 DATE CN/CO MGP CHECKED: FC DRAWN: WJ BOURNE ASSEMBLY DRG: TITLE: MATERIAL: BRASS CW614N M TO BS EN 12164 (CuZn39Pb3) S/AREA: 32023 CUSTOMER REF.: LENGTH L1 IN mm FINISH: 03.11.22 M3 HEXAGONAL MALE/FEMALE SPACER DRAWING NUMBER: NICKEL mm² R30-301XX02 SHT 2 OF 2