S1951-46R

Customer Information Sheet NOT TO SCALE C IF IN DOUBT - ASK DRAWING No.: S1951-46R 20.00 TYP (3.49) 4.60 SECTION Y-Y ALL DIMENSIONS IN mm 2.00 TYP 1.75 5.70 THIRD ANGLE PROJECTION 4.00 TYP 1.50 +0.10 TYP 0 11.50 RECOMMENDED PCB PAD LAYOUT 24.00 0.30 NOTES: 1. QUANTITY OF COMPONENTS PER REEL = 350. 2. THIS PRODUCT IS TAPED AND REELED IN ACCORDANCE WITH EIA-481 (ELECTRONICS INDUSTRIES ASSOCIATION). 3.50 3.50 PICK AND PLACE AREA 0.80 7.70 4.45 SECTION 7.45 7.15 5.53 3.63 24.4 5.70 (0.15) 4 x R0.50 R1.00 TYP X-X +2.0 0 330 6.75 FINISHED REELING DIRECTION RTP COMPONENT DETAILS NAME ISS. 100 MIN 4.60 3.00 9.85 9.45 2.30 2 x R0.75 14.01.22 31314 DATE CN/CO APPROVED: R.PORTLOCK CHECKED: M.RUDKIN DRAWN: S.BENNETT CUSTOMER REF.: 13.0 REEL DETAILS 1.50 8 www.harwin.com technical @harwin.com THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = 5 UNLESS STATED MULTI-DIRECTIONAL SHIELD FINGER IN TAPE AND REEL SEE ABOVE S/AREA: ASSEMBLY DRG: TITLE: MATERIAL: FINISH: +0.5 -0.2 DRAWING NUMBER: SEE ABOVE mm² S1951-46R SHT 2 OF 3 Customer Information Sheet DRAWING No.: S1951-46R IF IN DOUBT - ASK NOT TO SCALE C S1951-46R DEFLECTION FROM ABOVE 0.50 THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm S1951-46R DEFLECTION FROM FRONT 1.10 0.50 RECOMMENDED VERTICAL WORKING DEFLECTION = 0.50mm, MINIMUM FORCE OF 1.2N 1.00 RECOMMENDED HORIZONTAL WORKING DEFLECTION = 0.50mm MINIMUM FORCE OF 1.2N MAXIMUM RECOMMENDED DEFLECTION = 1.10mm MAXIMUM RECOMMENDED DEFLECTION = 1.00mm RTP NAME ISS. COMPONENT SPECIFICATION: MATERIAL = BERYLLIUM COPPER FINISH = 3µm 100% TIN OVER 2µm NICKEL ELECTRICAL: CURRENT RATING = 7A MAX CONTACT RESISTANCE = 20m MAX MECHANICAL: DURABILITY = 5000 CYCLES www.harwin.com technical @harwin.com THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = 5 UNLESS STATED DATE CN/CO APPROVED: R.PORTLOCK CHECKED: M.RUDKIN DRAWN: S.BENNETT ASSEMBLY DRG: TITLE: MULTI-DIRECTIONAL SHIELD FINGER IN TAPE AND REEL SEE ABOVE S/AREA: 14.01.22 31314 CUSTOMER REF.: MATERIAL: FINISH: 8 DRAWING NUMBER: SEE ABOVE mm² S1951-46R 3 SHT OF 3