S8211-46R

Customer Information Sheet DRAWING No.: S8211-46R IF IN DOUBT - ASK 24.00 TYP NOT TO SCALE C THIRD ANGLE PROJECTION 2.00 TYP 1.75 ALL DIMENSIONS IN mm 330 +0.10 1.50 TYP 0 4.00 TYP REEL DETAILS 4.35 4.10 1.50 +0.10 0 26.20 0.15 0.20 0.05 DETAIL A SCALE 6 56.00 0.30 52.40 SPECIFICATION: MATERIAL = PHOSPHOR BRONZE FINISH: 46 = 3µ 100% TIN, OVER NICKEL FOR COMPONENT SPECIFICATION SEE CO43XX, (LATEST ISSUE) SECTION SEE DETAIL Y-Y ROUND HOLES THIS SIDE A 26.0 (21.1) 10.9 5.10 (DIM 'A') 4.00 DETAIL B SCALE 6 FINISHED REELING DIRECTION DIM 'B' SEE NOTE 4 9.1 POLARITY MARKING 31.10 COMPONENT DETAILS 20.60 0.15 4.00 MIN SQUARE RECOMMENDED PAD LAYOUT (TOLERANCE 0.05) RA 4 NAME ISS. APPROVED: 5.50 SEE DETAIL B 30.70 +0.35 -0.10 NOTES: 1. QUANTITY PER REEL = 550. 2. THIS PRODUCT IS TAPED AND REELED IN ACCORDANCE WITH EIA-481-2-A (ELECTRONIC INDUSTRIES ASSOCIATION). 3. THIS PRODUCT IS SUITABLE FOR THE FOLLOWING BATTERIES: CR2016, CR2025, CR2032 & BR2016, BR2020, BR2025 & OTHERS PLEASE CHECK MANUFACTURERS SPECIFICATIONS FOR SUITABILITY. 4. DIM 'B' IS EQUAL OR UP TO 0.25mm LESS THAN MEASURED VALUE OF DIM 'A'. 12.04.22 31470 DATE CN/CO R.ALEXANDER CHECKED: M.RUDKIN DRAWN: R.ADDE CUSTOMER REF.: 5.50 TYP www.harwin.com technical @harwin.com NEGATIVE CONTACT PAD THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = ASSEMBLY DRG: MATERIAL: TITLE: COIN CELL RETAINER (20mm) (TAPE & REELED) SEE ABOVE FINISH: DRAWING NUMBER: SEE ABOVE 5 UNLESS STATED S/AREA: mm² S8211-46R SHT 2 OF 2