S8421-45R

Customer Information Sheet IF IN DOUBT - ASK DRAWING No.: S8421-45R NOT TO SCALE C THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm 24.00 TYP 1.75 2.00 TYP 4.00 TYP 1.50 +0.10 TYP 0 0.20 0.05 1.50 DETAIL 'A' +0.10 0 20.20 0.15 44.00 0.30 25.55 40.40 0.15 SECTION SEE DETAIL Y-Y ' A' REEL DETAILS 5.80 330 100 MIN SECTION 05.01.22 31302 NAME ISS. DATE CN/CO APPROVED: R.ALEXANDER RA X-X FINISHED REELING DIRECTION 6 CHECKED: ROUND HOLES THIS SIDE NOTES: 1. FOR CONNECTOR DETAILS SEE SHEET 4. 2. QUANTITY PER REEL = 500. 3. TAPE AND REELING TO BE IN ACCORDANCE WITH EIA-481 (ELECTRONIC INDUSTRIES ASSOCIATION) www.harwin.com technical @harwin.com R.ADDE CUSTOMER REF.: 13.0 THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. M.RUDKIN DRAWN: TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = +0.5 -0.2 ASSEMBLY DRG: MATERIAL: TITLE: SMT COIN CELL HOLDER FOR CR2032 TAPE & REELED SEE SHEET 1 FINISH: DRAWING NUMBER: SEE SHEET 1 5 UNLESS STATED S/AREA: mm² S8421-45R SHT 3 OF 4 Customer Information Sheet IF IN DOUBT - ASK DRAWING No.: S8421-45R SPECIFICATIONS: MATERIAL: MOULDING: PPS 30% G/F, UL94V-0, BROWN CONTACT: PHOSPHOR BRONZE FINISH: CONTACTS = GOLD FLASH ELECTRICAL: CONTACT RESISTANCE = 30m MAX INSULATION RESISTANCE = 1000M MIN DIELECTRIC VOLTAGE = 220V AC FOR 1 MINUTE ENVIRONMENTAL: OPERATING TEMPERATURE = -55 C TO +85 C NOT TO SCALE C THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm 22.30 SECTION X-X 1.10 0.20 MIN 24.75 24.00 RECOMMENDED PCB LAYOUT ALL TOLERANCES 0.05 2.60 2.30 22.30 20.20 3.00 7.50 18.40 13.00 05.01.22 31302 NAME ISS. DATE CN/CO APPROVED: R.ALEXANDER RA 5.30 11.40 15.70 POLARITY MARKING, FOR DRAWING ILLUSTRATION ONLY 6 CHECKED: M.RUDKIN DRAWN: R.ADDE CUSTOMER REF.: 3.00 www.harwin.com technical @harwin.com 3.60 2.80 0.20 NOTES: 1. SUITABLE FOR THE FOLLOWING COIN CELL: CR2032. 2. ALL TOLERANCES ARE 0.30 UNLESS OTHERWISE STATED. THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = MATERIAL: TITLE: COIN CELL HOLDER FOR CR2032 SEE ABOVE FINISH: DRAWING NUMBER: SEE ABOVE 5 UNLESS STATED S/AREA: ASSEMBLY DRG: mm² S8421-45R SHT 4 OF 4