5VAC9DW3

SPECIFICATION Part No. Features： High radiometric power per LED Very long operating life (up to 100K hours) Low voltage DC operated More Energy Efficient than Incandescent and most Halogen lamps Good color uniformity NO UV Superior ESD protection Easy installation with Screws High Heat dissipstion Efficiency Typical Applications： Reading lights(car,bus,aircraft) Portable(flashlight,bicycle) Automotive Exterior(Stop-Tail-Turn, CHMSL,Mirror Side Repeat) Decorative/Entertainment Dental curing lights Uplighters/Downlighters Bollards/Security/Garden Cove/Undershelf/Task Indoor/Outdoor Commercial and Residential Architectural Automotive Ext(stop-Tail-Turn) Street Lamp NOTE: All dimensions are millimeter. Tolerance is ±0.1mm unless otherwise noted. It is strongly recommended that the temperature of lead be not higher than 60℃. The appearance and specifications of the product may be modified for improvement without notice. www.ledz.com 1/3 Page 1 of 3 SPECIFICATION Part No.： DIRECTIVITY 1.0 0° Ta=25°C IF=540mA 30° Relative Luminous 0.5 60° 0 90° 60° 30° 0° 0.5 90° 1.0 Circuit Diagram: X27 Row LED LED LED LED A(+) LED LED LED LED LED LED LED LED K(-) www.ledz.com 2/3 Page 2 of 3 SPECIFICATION Part No.： Absolute maximum ratings（Ta = 25℃） Value Parameter DC Forward Current Peak Pulse Current Power Dissipation LED Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity Soldering Temperature Symbol IF Ipeak Pd Tj Topr Tstr ------Test Condition Min. ---Duty=0.1mS，1kHz ------------HBM ---Max. Unit ---700 mA ---1000 mA ---6.5 W ---120 ℃ -25 +80 ℃ -40 +100 ℃ 8000 ---V 220℃ for 5 Seconds max Electrical and optical characteristics （Ta = 25℃） Value Parameter Forward Voltage Luminous Flux Viewing Angle Color Temperature Symbol VF Φv 2θ1/2 CCT Test Condition Min. 9.0 ---------Typ. 9.2 380 120 ---Max. 10 ------3600 V lm Deg. K Unit IF = 540mA Luminous Flux Bins（Ta = 25℃） Bin Min Max U 240 280 V 280 320 W 320 360 X 360 400 Unit: lm CCT Bins（Ta = 25℃） Bin Min Max Note 1． Flux is measured with an accuracy of ±15% 2． CCT selection acc to CCT groups and accuracy of ± 200K 3． Forward Voltage is measured with an accuracy of ± 0.15 Unit: K W1 3000 3300 W2 3300 3600 W0 ----3000 www.ledz.com 3/3 Page 3 of 3