FH17LR-30S-0.5SH

Low Profile 0.5mm Pitch Connectors For FPC FH17 Series FH17 (on-board type) flip-lock mechanism FH17L(board drop-in standard type)flip-lock mechanism sFeatures 1. Low profile 0.5mm pitch FPC connectors As products become lighter/thinner/shorter/smaller, requests for thinly-made type FPC connectors are rapidly increasing. The FH17 Series is an ultra miniature version of the Hirose’s popular FH12 Series. FH17 has 35%-45% lower profile above the board. ( * FH17 : On-board type, height of 1.3 mm from board surface * FH17L : Offset standard type, height of 1.0 mm from board surface * FH17LR : Offset reverse type, height of 1.0 mm from board surface 2. Easy to use Flip-Lock Actuator Flip-lock (rotating type) ZIF mechanism enables good connectivity of FPC by a simple operation and light force. No board space is required for flip lock operation as compared to slide lock ZIF connectors. 3. Variety of Sizes and Options In addition to the on-board type (FH17), board drop-in types (FH17L and FH17LR) are also available. Selection will depend on the application mounting. Connectors are available with 8 to 30 contacts. FH17LR (board drop-in reverse type) flip-lock mechanism 4. Adaptable to thin-type FPC It conforms to the thin-type FPC (0.17mm) now being used for small size electronic equipment such as cameras, etc. (Thin-type FPC: Specifications without stiffener of double-faced FPC will reduce the cost of FPC. A single-faced FPC still requires stiffener, but the reduced thickness is easier for manufacturers to produce. 5. Packaged for Pick-and-Place machine Embossed tape packaging allows automatic mounting. sApplications Mobile telephones, devices using LCDs, CD-ROMs, cameras, other miniature devices 25 sProduct Specifications Ratings Current rating Voltage rating 0.4A DC 50V AC Operating temp. range -40 to +70ç(Note.1) Operatinghumidity range relative humidity 90% max. (No dew-fall) Storage temp. range -10 to +50ç(Note.2) Storage Humidity range relative humidity 90% max. (No dew-fall) (Note:4) Applicable FPC Item t=0.17 +0.03 -0.04 Tin-lead plating Specification 100V DC 150V AC/1 minute 1mA 20 cycles Conditions 1.Insulation resistance 500M ohms minimum 2.Withstanding voltage No flashover or insulation breakdown. 3.Contact resistance 50m ohms maximum Contact resistance : 50m ohms maximum 4.Durability (Insertion/withdrawal) No damage, cracks, or parts dislocation. No electrical discontinuity of 1µs or more Contact resistance: 50m ohms maximum. No damage, cracks, or parts dislocation. No electrical discontinuity of 1µs or more Contact resistance: 50m ohms maximum No damage, cracks, or parts dislocation. Contact resistance: 50m ohms maximum Insulation resistance: 50M ohms minimum No damage, cracks, or parts dislocation. Contact resistance: 50m ohms maximum Insulation resistance: 50M ohms minimum No damage, cracks, or parts dislocation. No deformation of components affecting performance. 5.Vibration Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6.Shock Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis. 7.Humidity (Steady state) 96 hours at temperature of 40ç and humidity of 90% to 95% 8.Temperature cycle 9.Resistance to soldering heat 5 cycles under conditions as follows; Temperature: -40ç / 15 to 35ç / 85ç / 15 to 35ç, Time: 30 / 5 max. / 30 / 5 max.(minutes) Reflow: At the recommended temperature profile Manual soldering: 350±5ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers nonconducting condition of installed connectors in storage, shipment or during transportation. Note 3. The above standards represent this series. The individual formal agreement should be based on the Specification. sMaterial Part Insulator Insulator Contact Metal fittings Insulated tape Material LCP PPS Phosphor bronze Brass Polyamide Finish --------------------------Tin-lead plating Tin-lead plating -------------Remarks UL94V-0 --------------------------UL94V-0 sOrdering Information 1 2 Series Name Mounting Type FH17 None : On-Board type L : Offset type LR : Offset reverse type Number of Contacts 8, 10, 15, 20, 24, 30 Contacts Pitch 0.5mm Contact Style SH : SMT horizontal mounting type Plating specifications Blank : Tin-lead plating (05) : Gold plating FH17L 1 2 - 30S - 0.5 SH (05) 3 4 5 6 3 4 5 6 26 BConnector Operating Instructions, precautions and recommendations Operation Precautions 1) Do not apply excessive force or use any type of tool to operate the actuator. 1.FPC Termination procedure. Connector installed on the board. 1) Lift up the actuator. Use thumb or index finger. 2) Rotate down the actuator until firmly closed. It is critical that the inserted FPC is not moved and remains fully inserted. Should the FPC be moved, open the actuator and repeat the process, starting with Step 1 above. 2) The connector will assure reliable performance when the actuator is open to 90° maximum (see fig.1) Do not exceed this angle, as this may cause permanent damage to the connector. 2.FPC Removal 1) Lift up the actuator. 2) Carefully remove the FPC. 3) Assure that the FPC is fully inserted parallel to mounting surface, with the exposed conductive traces facing down. FPC conductor surface (Bottom side) 27 On-Board Type (FH17) A B 0.5 0.2 C 4.3 0.6 2.9 D E F Note 1 The coplanarity of each lead and metal fitting is within 0.1. 0.6 1.3 (mm) Part Number FH17-10S-0.5SH FH17-15S-0.5SH FH17-20S-0.5SH FH17-24S-0.5SH FH17-30S-0.5SH CL No. 586-0638-8 586-0657-2 586-0637-5 586-0645-3 586-0625-6 Number of Contacts A 08.2 10.7 13.2 15.2 18.2 B 04.5 07.0 09.5 11.5 14.5 C 09.8 12.3 14.8 16.8 19.8 D 05.57 08.07 10.57 12.57 15.57 E 08.5 11.0 13.5 15.5 18.5 F 06.1 08.6 11.1 13.1 16.1 10 15 20 24 30 Note:Embossed tape reel packaging(2,000 pieces/reel). Order by number of reels. 28 BRecommended Land/ Metal Mask Dimensions (FH17) *Recommended metal mask thickness: t = 0.15 (mm) Part Number FH17-10S-0.5SH FH17-15S-0.5SH FH17-20S-0.5SH FH17-24S-0.5SH FH17-30S-0.5SH CL No. 586-0638-8 586-0657-2 586-0637-5 586-0645-3 586-0625-6 Number of Contacts B 04.5 07.0 09.5 11.5 14.5 G 09.1 11.6 14.1 16.1 19.1 H 06.1 08.6 11.1 13.1 16.1 J 05.3 07.8 10.3 12.3 15.3 10 15 20 24 30 Note:Embossed tape reel packaging (2,000 pieces/reel). Order by number of reels. 29 Offset Standard Type (FH17L) A B 0.5 (0.2) (0.35) 1.4 (Including polyamide tape) (0.8) (0.3) C (0.3) (0.4) 4.55 1.3 2 D K F (3.5) L Note: The coplanarity of each lead and metal fitting is within 0.1. 1.2 (1) (mm) Part Number FH17L-08S-0.5SH FH17L-10S-0.5SH FH17L-20S-0.5SH FH17L-30S-0.5SH CL No. 586-0654-4 586-0650-3 586-0651-6 586-0652-9 Number of Contacts A 07.2 08.2 13.2 18.2 B 03.5 04.5 09.5 14.5 C 08.8 09.8 14.8 19.8 D 04.57 05.57 10.57 15.57 K 12.8 13.8 18.8 23.8 F 05.1 06.1 11.1 16.1 L 04.4 05.4 10.4 15.4 08 10 20 30 Note:Embossed tape reel packaging (2,000 pieces/reel). Order by number of reels. 30 Offset Reverse Type (FH17LR) A B 0.5 (0.2) 1.4 (Including polyamide tape) (0.8) (0.35) (0.5) C (0.5) (1) 4.55 1.3 2 D K F (3.5) L Note: The coplanarity of each lead and metal fitting is within 0.1. 1.2 (0.4) (mm) Part Number FH17LR-08S-0.5SH FH17LR-10S-0.5SH FH17LR-20S-0.5SH FH17LR-24S-0.5SH FH17LR-30S-0.5SH CL No. 586-0666-3 586-0659-8 586-0660-7 586-0683-2 586-0661-0 Number of Contacts A 07.2 08.2 13.2 15.2 18.2 B 03.5 04.5 09.5 11.5 14.5 C 08.8 09.8 14.8 16.8 19.8 D 04.57 05.57 10.57 12.57 15.57 K 12.8 13.8 18.8 20.8 23.8 F 05.1 06.1 11.1 13.1 16.1 L 04.4 05.4 10.4 12.4 15.4 08 10 20 24 30 Note:Embossed tape reel packaging (2,000 pieces/reel). Order by number of reels. 31 BRecommended Land/ Metal Mask Dimensions (FH17L and FH17LR) M±0.1 N±0.1 P±0.1 1.8±0.1 3.65±0.1 1.5±0.1 (0.5) * Recommended metal mask thickness: t=0.15 0.5±0.05 B±0.05 0.3±0.03(Land) 0.25±0.03(Metal Mask) Note: The coplanarity of each lead and metal fitting is within 0.1. (0.85) (mm) Part Number FH17L- 8S-0.5SH FH17L- 10S-0.5SH FH17L- 20S-0.5SH FH17L- 30S-0.5SH FH17LR-8S-0.5SH FH17LR-10S-0.5SH FH17LR-20S-0.5SH FH17LR-24S-0.5SH FH17LR-30S-0.5SH CL No. 586-0654-4 586-0650-3 586-0651-6 586-0652-9 586-0666-3 586-0659-8 586-0660-7 586-0683-2 586-0661-0 Number of Contacts B 03.5 04.5 09.5 14.5 03.5 04.5 09.5 11.5 14.5 M 13.4 14.4 19.4 24.4 13.4 14.4 19.4 21.4 24.4 N 10.4 11.4 16.4 21.4 10.8 11.8 16.8 18.8 21.8 P 09.4 10.4 15.4 20.4 09.8 10.8 15.8 17.8 20.8 08 10 20 30 08 10 20 24 30 Note:Embossed tape reel packaging (2,000 pieces/reel). Order by number of reels. 32 1.8±0.1 BRecommended FPC Dimensions (FH17, FH17L, and FH17LR) 3MIN 2– R0 .2 0.5±0.05 0.5±0.1 B±0.05 Q±0.07 0.35±0.03 0.5±0.1 0.17 – 0.04 +0.03 * A combination of polyamide and heat-hardened adhesive should be used for the stiffener material in the case of single-sided FPC. The copper foil of the rear surface should not be used in the case of double-sided FPC. (mm) Part Number FH17FH17FH17FH17FH1710S-0.5SH 15S-0.5SH 20S-0.5SH 24S-0.5SH 30S-0.5SH CL No. 586-0638-8 586-0657-2 586-0637-5 586-0645-3 586-0625-6 586-0654-4 586-0650-3 586-0651-6 586-0652-9 586-0666-3 586-0659-8 586-0660-7 586-0683-2 586-0661-0 Number of Contacts B 04.5 07.0 09.5 11.5 14.5 03.5 04.5 09.5 14.5 03.5 04.5 09.5 11.5 14.5 Q 05.5 08.0 10.5 12.5 15.5 04.5 05.5 10.5 15.5 04.5 05.5 10.5 12.5 15.5 10 15 20 24 30 08 10 20 30 08 10 20 24 30 FH17L- 08S-0.5SH FH17L- 10S-0.5SH FH17L- 20S-0.5SH FH17L- 30S-0.5SH FH17LR-08S-0.5SH FH17LR-10S-0.5SH FH17LR-20S-0.5SH FH17LR-24S-0.5SH FH17LR-30S-0.5SH Note:Embossed tape reel packaging (2,000 pieces/reel). Order by number of reels. 33 BPackaging Specification On-Board Type (FH17) qEmbossed Carrier Tape Dimensions 4 2 12 1.75 .5 Ø1 1.8 0.3 U V T 1.5 1.4 4.6 1.9 Flat surface for placement with Automatic equipment Unreeling direction (mm) Part Number FH17-10S-0.5SH FH17-15S-0.5SH FH17-20S-0.5SH FH17-24S-0.5SH FH17-30S-0.5SH CL No. 586-0638-8 586-0657-2 586-0637-5 586-0645-3 586-0625-6 Number of Contacts R 16 24 24 24 32 S --------------------------------28.4 1.7 T 07.5 11.5 11.5 11.5 14.2 2 S R U 10.6 13.1 15.6 17.6 20.6 W V 06.5 09.0 11.5 13.5 16.5 W 16.5 24.5 24.5 24.5 32.5 10 15 20 24 30 qReel Dimensions Ø1 3 Ø330 End portion Mounting portion Leader area (400mm or more) Ø80 Empty section (10 pockets or more) Embossed carrier tape Empty section (10 pockets or more) Top cover tape 34 Offset Type (FH17L and FH17LR) qEmbossed Carrier Tape Dimensions 1.75 ±0.1 4 2 12 1.8 0.3 Ø1 .5 X T 1.5 2.8 1.9 Unreeling direction 5.6 1.7 Flat surface for placement with Automatic equipment Standard Type Part Number CL No. Number. of Contacts (mm) R 24 24 32 44 S ------T X W Reverse Type Part Number CL No. Number. of Contacts R S (mm) R 24 24 32 32 44 S ------T X W FH17L-08S-0.5SH 586-0654-4 FH17L-10S-0.5SH 586-0650-3 FH17L-20S-0.5SH 586-0651-6 FH17L-30S-0.5SH 586-0652-9 08 10 20 30 11.5 13.8 24.5 11.5 14.8 24.5 FH17LR-08S-0.5SH 586-0666-3 FH17LR-10S-0.5SH 586-0659-8 FH17LR-20S-0.5SH 586-0660-7 FH17LR-24S-0.5SH 586-0683-2 FH17LR-30S-0.5SH 586-0661-0 08 10 20 24 30 11.5 13.8 24.5 11.5 14.8 24.5 28.4 14.2 19.8 32.5 40.4 20.2 24.8 44.5 28.4 14.2 19.8 32.5 28.4 14.2 21.8 32.5 40.4 20.2 24.8 44.5 qReel Dimensions Ø1 3 2 W Ø 330 End portion Mounting portion Lead portion (400mm min.) Ø 80 Blank portion (10 pockets min.) Embossed carrier tape Blank portion (10 pockets min.) Top cover tape 35 BRecommended Temperature Profile HRS test conditions Solder method :Reflow, IR/hot air (Nihon Den-netsu Co., Ltd.’s Part Number: SENSBY NR-2) Environment Solder composition :Room air :Paste, 63%Sn/37%Pb (Senju Metal Industry, Co., Ltd.’sPart Number: OZ63-201C-50-9) :Glass epoxy 40mm∞80mm∞1.6mm thick :On-Board type 0.3mm∞1.0mm Offset type 0.3mm∞1.5mm :On-Board type 0.25mm∞1.0mm∞0.15mm thick Offset type 0.25mm∞1.5mm∞0.15mm thick This temperature profile is based on the above conditions. \In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. Test board Land dimensions Metal mask 36 BFH17 Series FPC Construction (Recommended Specifications) 1. Single-Sided FPC Material Name Covering layer film Cover adhesive Surface treatment Copper foil Base adhesive Base film Stiffener Polyamide 1 mil Polyamide 2 mil Total Reinforcement material adhesive Heat-hardened adhesive Tin-lead plating Cu 1oz Material Polyamide 1 mil Thickness (µm) 25 25 5 35 18 25 30 50 163 2. Using Double-Sided FPC Material Name Covering layer film Cover adhesive Surface treatment Through hole copper Copper foil Base adhesive Base film Base adhesive Copper foil Cover adhesive Covering layer film Polyamide 1 mil Total Note: Stiffener is not required for the double-sided FPC. To prevent release of the lock due to FPC bending, please do not use copper foil on the rear side. Cu 1oz Polyamide 1 mil Tin-lead plating Cu Cu 1oz Material Polyamide 1 mil Thickness (µm) 25 25 5 15 35 18 25 18 35 33 25 174 3. Precautions 1. This specification is a recommendation for the construction of the FH17 Series FPC (t=0.17 +0.03/-0.04). 2. The FH17 Series are connectors for thin FPC which is beginning to be used in cameras and other miniature equipment. Stiffener is not required for double-sided FPC which will be reflected in FPC cost reduction. Please Note that in the case of single-sided FPC, stiffener is required, but the thickness dimension can be created easily. For details about the construction, please contact the FPC/FFC manufacturers. FPC/FFC Manufactures' Contact List Sumitomo Bakelite Co., Ltd. Flexible Printed Circuit Board Division 5-8, Higashi-shinagawa 2-chome, Shinagawa-ku, Tokyo, Japan Fujikura Ltd. Electronics Global Marketing Department 1-5-1, Kiba, Koto-ku, Tokyo, Japan NOK Corporation Sales Division Overseas Business Department 1-12-15, Shiba-Daimon, Minato-ku, Tokyo, Japan TEL:+81 3 5462 4191 FAX:+81 3 5462 4882 TEL:+81 3 5606 1165 FAX:+81 3 5606 1530 TEL:+81 3 3432 6976/8415 FAX:+81 3 3432 3919 37