FH19-21S-0.5SH

World's smallest & lightest 0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable Connectors FH19 & FH19S Series FH19 Series – FPC, FFC thickness: 0.2±0.03mm Actuator color: Dark brown FH19S Series – FPC, FFC thickness: 0.3±0.03mm Actuator color: Black sFeatures World's smallest & lightest q 0.9mm Height incorporates the Flip-Lock System (30pos. Type) 1. Low-profile 0.5mm pitch FPC, FFC Connectors Miniaturization of portable equipment and personal mobile devices has created increased demand for a low profile, high density, and high reliability connectors. *The design of this connector has been made thinner and smaller, with a height of 0.9mm and width of 3mm. 17m 0.9mm m m [As of August 2002, this is the smallest connector of this type available on the market !] *PCB footprint: Reduced approximately 48% (as compared with Hirose Electric's 0.5mm pitch FH12 Series connectors) *Connector weight: Reduced approximately 78% (as compared with Hirose Electric's 0.5mm pitch FH12 Series connectors) q Enclosed construction FPC FFC FPC •••FFC FPC • FFC FPC FFC 2. Conductive traces on the PCB can be designed to run under the connector All bottom surface of the connector is solid, without any exposure of the contact. 3. Proven Flip-Lock Actuator System assures easy and reliable operation Rotating actuator permits easy insertion and reliable connection with the FPC & FFC. Tactile sensation confirms complete mechanical locking of the actuator and the electrical connection. Enclosed construction (No exposed contacts.) Metal fittings (Leadless) 4. Accepts 0.2mm & 0.3mm thick FPC, FFC Accepts 0.2mm & 0.3mm thick FPC, FFC, easy inserted in the connector. The connector will also terminate successfully with 0.2mm thick Flat Flexible Cable (FFC). q Metal Fittings (Leadless Type) Absence of protrusions from the connector helps in design of miniaturized devices. 5. Designed for placement with automatic equipment Packaged in embossed tape, on reel. One reel contains 5,000 pieces. 6. Environmental considerations The center cores of the embossed tape reels are made of paper, unlike typical cores made of styrofoam. sApplications Notebook PC’s, PDA’s, digital cameras and other compact devices requiring interconnections of the main circuit board with the LCD, plasma display (PDP), HDD or other devices. 38 3m sProduct Specifications Current rating 0.5 A DC Rating Voltage rating 50 V AC Recommended FPC, FFC FH19 Series FH19S Series Operating temperature range -55ç to +80ç (Note 1) Operating humidity range Relative humidity 90% max. (No condensation) Thickness: = 0.2 ± 0.03mm Tin-lead plating (Note 3) Thickness: = 0.3 ± 0.03mm Tin-lead plating (Note 3) Storage temperature range -10ç to +50ç (Note 2) Storage humidity range Relative humidity 90% max. Item 1. Insulation resistance 2. Withstanding voltage 3. Contact resistance 4. Durability (insertion/ withdrawal) 5. Vibration 500 M ohms min. Specification 100 V DC 150 V AC/1 minute 1 mA 20 cycles No flashover or insulation breakdown 100 m ohms max. *Including FPC/FFC conductor resistance Contact resistance: 100 m ohms max. No damage, cracks, or parts dislocation. No electrical discontinuity of 1 µs or more. Contact resistance: 100 m ohms max. No damage, cracks, or parts dislocation. No electrical discontinuity of 1 µs. min. Contact resistance: 100 m ohms max. No damage, cracks, or parts dislocation. Contact resistance: 100 m ohms max. Insulation resistance: 100 M ohms min. No damage, cracks, or parts dislocation. Contact resistance: 100 m ohms max. Insulation resistance: 100 M ohms min. No damage, cracks, or parts dislocation. No deformation of components affecting performance. Conditions Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 2 hours in each of the 3 directions Acceleration of 981 m/s2, 6 ms duration, sine halfwave waveform, 3 cycles in each of the 3 axis. 96 hours at temperature of 40ç and humidity of 90 to 95% Temperature: -40ç / +15ç to +35ç / +85ç / +15ç to +35ç Time: 30 / 2 to 3 / 30 / 2 to 3(Minutes) 5 cycles Reflow: At the recommended temperature profile Manual soldering: 350ç±5ç for 5 seconds 6. Shock 7. Humidity (Steady state) 8. Temperature cycle 9. Resistance to soldering heat Note 1: Includes temperature rise caused by current flow. Note 2: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Note 3: When FPC is gold plated, the connector contacts should be also gold plated: Select the (05) specification. sMaterials Part Insulator Contacts Metal fittings Material LCP PPS Phosphor bronze Phosphor bronze Finish Color: Beige Color: Dark brown (FH19 Series) Color: Black (FH19S Series) Tin-lead plating (Note 3) Pure tin reflow plating UL94V-0 ------------Remarks sOrdering information FH19 1 1 Series name : 2 Blank : S : FH19 S - 30S - 0.5 SH (05) 2 3 4 4 Contact pitch : 5 Terminal type SH: SMT horizontal mounting type 5 6 0.5mm FPC,FFC thickness : 0.2mm FPC,FFC thickness : 0.3mm 4 to 50 3 No. of contacts : 6 Plating specifications : (05): Gold plating (51): Tin-lead plating 39 BConnector Operating Instructions, Precautions and Recommendations Operation Precautions 1) Do not apply excessive force or use any type of tool to operate the actuator. 1. FPC/FFC Termination procedure. Connector installed on the board. 1) Lift up the actuator. Use thumb or index finger. 2) Rotate down the actuator until firmly closed. It is critical that the inserted FPC/FFC is not moved and remains fully inserted. Should the FPC/FFC be moved, open the actuator and repeat the process, starting with Step 1 above. 2) The connector will assure reliable performance when the actuator is open to 130° maximum (see fig.1) Do not exceed this angle, as this may cause permanent damage to the connector. 2. FPC/FFC Removal 1) Lift up the actuator. 2) Carefully remove the FPC/FFC. 3) Assure that the FPC/FFC is fully inserted parallel to mounting surface, with the exposed conductive traces facing down. FPC conductor surface (Bottom side) 40 sConnector Dimension [FH19 Series] A B G 0.5 ∞Number of contacts 0.15 G ( 0.15 ) 0.5 A** Polarizing mark indicator Number of contacts indicator ( 0.5 ) ( 2.1 ) 0 (0.15) (C: FPC insertion area dimension) 2 1 0.15MAX 1.3 2.15 0.9 (Including contact terminal leads) 0 0.15MAX 1 2 (1) 2.5 E D Notes 1 The coplanarity of each terminal lead and metal fitting is within 0.1 2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body. 3 The connector is supplied in embossed tape packaging. For details see the Packaging Specifications. 4 Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector. Unit: mm Part Number FH19-4S-0.5SH(51) FH19-6S-0.5SH(51) FH19-8S-0.5SH(51) FH19-9S-0.5SH(51) FH19-13S-0.5SH(51) FH19-15S-0.5SH(51) FH19-17S-0.5SH(51) FH19-20S-0.5SH(51) FH19-21S-0.5SH(51) FH19-24S-0.5SH(51) FH19-27S-0.5SH(51) FH19-30S-0.5SH(51) FH19-40S-0.5SH(51) FH19-50S-0.5SH(51) CL No. 586-1009-8-51 Reserved for product expansion 586-1012-2-51 586-1006-0-51 586-1001-6-51 586-1004-4-51 586-1007-2-51 586-1002-9-51 586-1015-0-51 586-1011-0-51 586-1000-3-51 586-1003-1-51 586-1008-5-51 586-1005-7-51 Number of Contacts 4 6 8 9 13 15 17 20 21 24 27 30 40 50 A 04.0 05.0 06.0 06.5 08.5 09.5 10.5 12.0 12.5 14.0 15.5 17.0 22.0 27.0 B 01.5 02.5 03.5 04.0 06.0 07.0 08.0 09.5 10.0 11.5 13.0 14.5 19.5 24.5 C 02.57 03.57 04.57 05.07 07.07 08.07 09.07 10.57 11.07 12.57 14.07 15.57 20.57 25.57 D 03.35 04.35 05.35 05.85 07.85 08.85 09.85 11.35 11.85 13.35 14.85 16.35 21.35 26.35 Note: Embossed tape reel packaging (5,000 pieces/reel) . Order by number of reels. 41 [FH19S Series] A B G 0.5 0.5 ∞Number of contacts (0.15) 0.15 G (1) 0.9 (Including contact terminal leads) 0 0.15MAX 2 E 1 A ** Polarizing mark indicator Number of contacts indicator. (0.5) (0.03) 0 (1.3) 2.15 2.5 (C: FPC insertion area dimension) D±0.1 (0.15) 2 1 0.15MAX Notes 1 The coplanarity of each terminal lead and metal fitting is within 0.1 2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body. 3 The connector is supplied in embossed tape packaging. For details see the Packaging Specifications. 4 Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector. Unit: mm Part Number FH19S-4S-0.5SH(51) FH19S-5S-0.5SH(51) FH19S-6S-0.5SH(51) FH19S-9S-0.5SH(51) FH19S-10S-0.5SH(51) FH19S-12S-0.5SH(51) CL No. 586-1119-6-51 586-1115-5-51 Reserved for product expansion 586-1120-5-51 586-1118-3-51 586-1105-1-51 Number of Contacts 4 5 6 9 10 12 13 14 16 17 18 20 21 22 24 26 27 30 32 45 50 A 04.0 04.5 05.0 06.5 07.0 08.0 08.5 09.0 10.0 10.5 11.0 12.0 12.5 13.0 14.0 15.0 15.5 17.0 18.0 24.5 27.0 B 01.5 02.0 02.5 04.0 04.5 05.5 06.0 06.5 07.5 08.0 08.5 09.5 10.0 10.5 11.5 12.5 13.0 14.5 15.5 22.0 24.5 C 02.57 03.07 03.57 05.07 05.57 06.57 07.07 07.57 08.57 09.07 09.57 10.57 11.07 11.57 12.57 13.57 14.07 15.57 16.57 23.07 25.57 D 03.35 03.85 04.35 05.85 06.35 07.35 07.85 08.35 09.35 09.85 10.35 11.35 11.85 12.35 13.35 14.35 14.85 16.35 17.35 23.85 26.35 FH19S-13S-0.5SH(51) Reserved for product expansion FH19S-14S-0.5SH(51) FH19S-16S-0.5SH(51) FH19S-17S-0.5SH(51) FH19S-18S-0.5SH(51) FH19S-20S-0.5SH(51) FH19S-21S-0.5SH(51) FH19S-22S-0.5SH(51) FH19S-24S-0.5SH(51) FH19S-26S-0.5SH(51) FH19S-27S-0.5SH(51) FH19S-30S-0.5SH(51) FH19S-32S-0.5SH(51) FH19S-45S-0.5SH(51) FH19S-50S-0.5SH(51) 586-1113-0-51 586-1112-7-51 586-1100-8-51 586-1110-1-51 586-1101-0-51 Reserved product expansion 586-1108-0-51 586-1102-3-51 586-1104-9-51 586-1103-6-51 586-1109-2-51 586-1121-8-51 586-1111-4-51 586-1107-7-51 Note: Embossed tape reel packaging (5,000 pieces/reel) . Order by number of reels. 42 (2.1) BRecommended PCB Land and Metal Mask Dimensions [Common to FH19 & FH19S Series] Recommended metal mask thickness: 0.10 mm. B 0.8±0.05 (0.15) (0.15) (0.15) (0.2) K±0.1 (A) 2R0 .2 0.5 ∞Number of contacts 0.3±0.05 (Land) 0.1 H 0.25±0.05 (Metal mask) H 3.3±0.05 0.8±0.05 J±0.1 BRecommended FPC, FFC Dimensions [Common to FH19 & FH19S Series] L±0.05 0.5±0.07 2.5±0.3 (Area with removed covering film layer) 0.5±0.03 B±0.03 0.35±0.03(FPC) 0.3±0.03(FFC) FH19 Series 0.2±0.03 (0.15) (0.05) (2.5) (3) FH19S Series 0.3±0.03 Note1: Polyamide and a thermally hardened adhesive is recommended as the materials for the stiffener. Note2: Y dimension should be 1.5mm min., and X dimension should be 1.5mm for improved flexibility of FPC. Unit: mm Number of Contacts 04 05 06 08 09 10 12 13 14 15 16 17 18 20 A 04.0 04.5 05.0 06.0 06.5 07.0 08.0 08.5 09.0 09.5 10.0 10.5 11.0 12.0 B 01.5 02.0 02.5 03.5 04.0 04.5 05.5 06.0 06.5 07.0 07.5 08.0 08.5 09.5 J 03.1 03.6 04.1 05.1 05.6 06.1 07.1 07.6 08.1 08.6 09.1 09.6 10.1 11.1 K 03.9 04.4 04.9 05.9 06.4 06.9 07.9 08.4 08.9 09.4 09.9 10.4 10.9 11.9 L 02.5 03.0 03.5 04.5 05.0 05.5 06.5 07.0 07.5 08.0 08.5 09.0 09.5 10.5 Number of Contacts 21 22 24 26 27 30 32 40 45 50 A 12.5 13.0 14.0 15.0 15.5 17.0 18.0 22.0 24.5 27.0 B 10.0 10.5 11.5 12.5 13.0 14.5 15.5 19.5 22.0 24.5 J 11.6 12.1 13.1 14.1 14.6 16.1 17.1 21.1 23.6 26.1 K 12.4 12.9 13.9 14.9 15.4 16.9 17.9 21.9 24.4 26.9 (X) 3.5 min. (Stiffener) 3.5 min. (Stiffener) Unit: mm L 11.0 11.5 12.5 13.5 14.0 15.5 16.5 20.5 23.0 25.5 43 BPackaging Specifications [Common to FH19 & FH19S Series] q Embossed Carrier Tape Dimensions (1.7) (0.3) 4±0.1 2±0.15 8±0.1 1.75±0.1 (Ｑ ) Ｎ±0.1 Flat surface for placement with Automatic equipment (R) Top cover tape Ｍ±0.3 Unreeling direction qReel Dimensions (Ø1 3) (2) (Ø380) End portion Mounting portion Lead portion (400 mm min.) Blank portion (10 pockets min.) Embossed carrier tape Blank portion (10 pockets min.) Unit: mm Number of Contacts 04 05 06 08 09 10 12 13 14 15 16 17 18 20 M 16 16 16 16 16 16 16 16 16 16 24 24 24 24 N 07.5 07.5 07.5 07.5 07.5 07.5 07.5 07.5 07.5 07.5 11.5 11.5 11.5 11.5 Q 04.3 04.8 05.3 06.3 06.8 07.3 08.3 08.8 09.3 09.8 10.3 10.8 11.3 12.3 R 16.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5 24.5 24.5 24.5 24.5 Number of Contacts 21 22 24 26 27 30 32 40 45 50 M 24 24 24 24 24 24 32 44 44 44 N 11.5 11.5 11.5 11.5 11.5 11.5 14.2 20.2 20.2 20.2 Q 12.8 13.3 14.3 15.3 15.8 17.3 18.3 22.3 24.8 27.3 (Ø80) Ø1 (3.3) (4.3) (1) .5 + 0 0 .1 Unit: mm R 24.5 24.5 24.5 24.5 24.5 24.5 32.5 44.5 44.5 44.5 Notes: 5,000 pieces per reel. Embossed tape 32 mm or wider will have perforated feed holes on two sides. 44 BRecommended Temperature Profile [For FH19 & FH19S Series] qUsing Typical Solder Paste 5 sec. Max. 250 240ç HRS test conditions Solder method :Reflow, IR/hot air (Nihon Den-netsu Co., Ltd.’s Part Number: SENSBY NR-2) :Room air :Paste, 63%Sn/37%Pb (Senju Metal Industry, Co., Ltd.’s Part Number: OZ63-201C-50-9) :Glass epoxy 45mm∞100mm∞1.6mm thick :0.3mm∞0.8mm :0.25mm∞0.8mm∞0.1mm thick Temperature(ç) 200 200ç Environment 150 160ç 150ç Solder composition 100 Test board Land dimensions Metal mask 50 25ç 0 Start 60 Preheating 120 Soldering (60 sec.) 60 sec. to 90 sec. (30 sec.) (20 sec. to 30 sec.) This temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. Time (Seconds) qUsing Lead-free Solder paste MAX 250ç 250 230ç 200 Temperature(ç) 200ç HRS test condition Solder method :Reflow, IR/hot air (Nihon Den-netsu Co., Ltd.’s Part Number: SENSBY NR-2) :Room air :Paste, 96.5%Sn/3.0%Ag/0.5%Cu (Senju Metal Industry, Co., Ltd.’s Part Number:M705-221CM5-42-10.5) Test board Land dimensions Metal mask :Glass epoxy 45mm∞100mm∞1.6mm thick : 0.3mm∞0.8mm :0.25mm∞0.8mm∞0.1mm Environment Solder composition 150 150ç 100 50 25ç (60 sec.) 0 Start 60 Preheating 120 Time (Seconds) Soldering 90 sec. to 120 sec. (60 sec.) In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult tour solder paste and equipment manufacturer for specific recommendations. 45 BFH19 & FH19S Series FPC/FFC Construction (Recommended Specifications) 1. Using Single-sided FPC FPC : Flexible Printed Circuit Material Name Covering film layer. Cover adhesive Surface treatment Copper foil Base adhesive Base film Polyamide 1 mil thick Tin-lead plating Cu 1oz Polyamide Material 1 mil thick Thickness (µm) FH19 25 25 5 35 25 25 30 75 195 FH19S 25 25 5 35 25 25 30 175 295 Reinforcement material adhesive Heat-hardened adhesive Stiffener Polyamide Total 3 mil thick 2. Dual-sided FPC FPC : Flexible Printed Circuit Material Name Covering layer film Cover adhesive Surface treatment Through-hole copper Copper foil Base adhesive Base film Base adhesive Copper foil Cover adhesive Covering layer film Reinforcement material adhesive Stiffener Polyamide 1 mil thick Cu 1/2oz Polyamide 1 mil thick Tin-lead plating Cu Cu 1/2oz Polyamide Material 1 mil thick Thickness (µm) FH19 25 25 5 15 18 18 25 18 18 25 25 25 25 199 FH19S 25 25 5 15 18 18 25 18 18 25 25 50 100 299 Heat-hardened adhesive Polyamide Total 1 mil thick 3. Using FFC (Flexible Flat Cable) FFC : Flexible Flat Cable Material Name Polyester film Adhesive Tin plated, soft copper film Adhesive Polyester Adhesive Stiffener Polyester Polyester Total Polyester Polyester thermoplastic type Material Thickness (µm) FH19 12 30 35 30 12 30 100 207 FH19S 12 30 35 30 12 30 188 295 * Practical tolerance of thickness dimension is ±20µm (i.e., 187 to 227µm). Note 1: The 0.2mm thick FFC is the 0.3mm thick FFC with different stiffener. Note 2: This specification is a recommendation for the FH19, FH19S Series connectors using FPC/FFC 0.2/0.3 ±0.03mm thick. 46