FH21-28S-1DSA

1mm Pitch FPC/FFC Connector FH 21 Series sFeatures 1. LIF (Low Insertion Force) Mechanism LIF mechanism secures mounting serviceability. 2. Kink Mechanism DIP post is treated with kinks, and prevent connector floating in the soldering process. 3. Contact Structure on Both Sides The contact structure on both sides does restrict directionality of FPC and FFC conductors. sApplications HDD, facsimiles, printers, and crystal liquie modules, etc. sProduct Specifications Rated Current: 0.5A Rating Operating Temperature Range: -30 ~ +70ç (Note 1) Storage Temperature Range: -10 ~ +50ç (Note 2) (Not dewed) Applicable FPC Item 1. Insulation Resistance 2. Withstand voltage 3. Contact Resistance 4. Mechanical Operation 500Mø min. Neither short nor breakdown should occur 40mø *FPC conductor resistance included Contact resistance: 40mø max. No part should be damaged, cracked, or loosened Electrical discontinuity, 1µS max. 5. Vibration Contact resistance: 40mø No part should be damaged, cracked, or loosened Electrical discontinuity, 1µS max. 6. Shock Contact resistance: 40mø max. No part should be damaged, cracked, or loosened 7. Moisture Resistance 7. in Steady State Note 1. Note 2. Note 2. Note 3. Contact resistance: 40mø max. Insulation resistance: 50Mø max. Acceleration: 490m/s, duration: 11ms, sine half-wave in 3 directions for 3 cycles, respectively Exposed to temperature 60ç and humidity 90~95% Frequency 10~55Hz and single amplitude 0.75mm in 3 directions for 2 hours, respectively. t=0.3±0.05 Solder plating Specification Measured at 100V DC 150V AC for 1 minute Measured at 100mA 10 cycles Condition (Not dewed) Rated Voltage: 50V AC Operating Humidity Range: Relative humidity 90% max. Storage Humidity Range: Relative Humidity: 90% max. for 96 hours No part should be damaged, cracked, or loosened Temperature rise included when energized This storage indicates a long-term storage state for the unused product before the board mounted. The operating temperature and humidity ranges are applied to the non-energized state after the connector has been installed in the board. The above standards represent this series. The individual formal agreement should be based on the "Specification". D15 sMaterial Part Insulator Contact Material PBT Phosphor bronze Finish Black Solder plating Remarks UL94V-0 --------------- sOrdering Information Please determine the specific product. If needed, please select and order the product from the product No. as listed in this catalog on page D17 and D18. FH 21 - 10 S - 1 DS q w e r t y q Series Name w Series No. : FH : 21 18, 20, 22, 24, 25, 28, 30 r Contact Alignment: Single t Contacts Pitch: 0.3mm y Contact Type: DS : Right angle type DSA : Straight type e Number of Contacts: 5, 6, 8, 10, 12, 14, 15, 16, BFPC•FFC Dimensions Note: In case of FPC, specify 0.25, excluding adhesive agent included in FFC. Unit: mm Number of Contacts Size A B 5 4.0 6.0 6 5.0 7.0 8 7.0 9.0 10 9.0 11.0 12 11.0 13.0 14 13.0 15.0 15 14.0 16.0 16 15.0 17.0 18 17.0 19.0 20 19.0 21.0 22 21.0 23.0 24 23.0 25.0 26 25.0 27.0 28 27.0 29.0 30 29.0 31.0 BPCB Footprints Unit: mm Number of Contacts Size A 5 4.0 6 5.0 8 7.0 10 9.0 12 11.0 14 13.0 15 14.0 16 15.0 18 17.0 20 19.0 22 21.0 24 23.0 26 25.0 28 27.0 30 29.0 D16 sRight Angle Type Unit: mm Product No. FH21-05S-1DS FH21-06S-1DS FH21-08S-1DS FH21-10S-1DS FH21-12S-1DS FH21-14S-1DS FH21-15S-1DS FH21-16S-1DS FH21-18S-1DS FH21-20S-1DS FH21-22S-1DS FH21-24S-1DS FH21-26S-1DS FH21-28S-1DS FH21-30S-1DS HRS No. CL586-0410-0 CL586-0411-2 CL586-0412-5 CL586-0413-8 CL586-0414-0 CL586-0415-3 CL586-0416-6 CL586-0417-9 CL586-0418-1 CL586-0419-4 CL586-0420-3 CL586-0421-6 CL586-0422-9 CL586-0423-1 CL586-0424-4 Number of Contacts 5 6 8 10 12 14 15 16 18 20 22 24 26 28 30 A 07 08 10 12 14 16 17 18 20 22 24 26 28 30 32 B 06.15 07.15 09.15 11.15 13.15 15.15 16.15 17.15 19.15 21.15 23.15 25.15 27.15 29.15 31.15 C 04 05 07 09 11 13 14 15 17 19 21 23 25 27 29 D17 sStraight Type Unit: mm Product No. FH21-05S-1DSA FH21-06S-1DSA FH21-08S-1DSA FH21-10S-1DSA FH21-12S-1DSA FH21-14S-1DSA FH21-15S-1DSA FH21-16S-1DSA FH21-18S-1DSA FH21-20S-1DSA FH21-22S-1DSA FH21-24S-1DSA FH21-26S-1DSA FH21-28S-1DSA FH21-30S-1DSA HRS No. CL586-0425-7 CL586-0426-0 CL586-0427-2 CL586-0428-5 CL586-0429-8 CL586-0430-7 CL586-0431-0 CL586-0432-2 CL586-0433-5 CL586-0434-8 CL586-0435-0 CL586-0436-3 CL586-0437-6 CL586-0438-9 CL586-0439-1 Number of Contacts 5 6 8 10 12 14 15 16 18 20 22 24 26 28 30 A 7 8 10 12 14 16 17 18 20 22 24 26 28 30 32 B 06.15 07.15 09.15 11.15 13.15 15.15 16.15 17.15 19.15 21.15 23.15 25.15 27.15 29.15 31.15 C 4 5 7 9 11 13 14 15 17 19 21 23 25 27 29 D18