FH28D-50S-0.5SH98

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. 0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH28 Series Secure actuator lock and retention Hold in place by metal fittings Actuator color: Dark brown Hold in place by contacts sOverview Continuing market trends demand higher contact count connectors while maintaining high electrical/mechanical reliability, exact FPC/FFC positioning and durability. FPC temporary hold protrusion sFeatures 1. Precise FFC/FPC positionining Large angle of the actuator opening and built-in side guides in the connector allow straight and exact insertion of the FPC / FFC. 2. Rotating actuator Proven rotating actuator system allows easy ZIF connection, confirming it with a definite tactile feel. The contact securely holds the actuator in place, providing reliable normal force. The unique contact configuration assures that the connector will remain dimensionally stable over the device’s life. 3. Strong FFC / FPC retention force Horizontal direction FFC / FPC retention force : Increased 200% (as compared with FH12 series)(30 pos.) Support straight type FPC / FFC 4. Accepts standard FPC/FFC thickness 0.3mm thick standard Flexible Printed Circuit (FPC) and Flexible Flat cable (FFC) can be used. 5. Conductive traces on the PCB can run under the connector No exposed contacts on the bottom of the connector. 6. Board placement with automatic equipment Flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. Standard reel packaging contains 2,000 connectors. 7. Halogen-free * *As defined by IEC61249-2-21 Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum 8. Optional 500 piece reel packaging Standard packaging is 2,000 pieces per reel; however, 500 piece reels are possible. (Emboss reel external diameter is 330mm.) 2010.9 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. FH28 Seriesq0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors sProduct Specifications Rating Operating temperature range-40ç to +85ç(Note 2) Rated current 0.5A DC(Note.1) Operating humidity rangeRelative humidity 90% max. Rated voltage 50V AC (No condensation) Storage temperature range -10ç to +50ç (Note 3) Storage humidity range Relative humidity 90% max Recommended FPC/FFC Thickness: = 0.3 ± 0.05mm Gold plated contact traces Item Specification 1.Insulation resistance 500 Mø min 2.Withstanding voltage No flashover or insulation breakdown. 50 mø max. 3.Contact resistance * Including FPC/FFC conductor resistance Contact resistance: 50 mø max. 4.Durability (insertion/ withdrawal) No damage, cracks, or parts dislocation. No electrical discontinuity of 1µs or more. 5.Vibration Contact resistance: 50 mø max. No damage, cracks, or parts dislocation. No electrical discontinuity of 1µs. min. 6.Shock Contact resistance: 50 mø max. No damage, cracks, or parts dislocation. Contact resistance: 50 mø max. 7.Humidity Insulation resistance: 50 Mø min. (Steady state) No damage, cracks, or parts dislocation. Contact resistance: 50 mø max. Insulation resistance: 50 Mø min. 8.Temperature cycle No damage, cracks, or parts looseness. No deformation of components affecting 9.Resistance to performance. soldering heat Conditions 100 V DC 150 V AC /one minute 1 mA (DC or 1000Hz) 20 cycles Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles in each of the 3 directions. Acceleration of 981 m/s2, 6 ms duration, sine halfwave waveform, 3 cycles in each of the 3 axis. 96 hours at temperature of 40ç and humidity of 90% to 95%. Temperature: -40ç➝+15ç to+35ç➝+85ç➝+15ç to +35ç Time: 30➝2 to 3➝30➝2 to 3 (Minutes) 5 cycles Reflow: At the recommended temperature profile Manual soldering: 350ç ± 5ç for 5 seconds Note 1: When passing the current through all of the contacts,use 70% of the current rating. Note 2: Includes temperature rise caused by current flow. Note 3: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Note.4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. sMaterials / Finish Part Insulator Actuator Contacts Metal fittings Material LCP LCP Phosphor bronze Brass Finish Color: Gray Color: Black Gold plated Tin plated Remarks UL94V-0 ------------- sOrdering information FH 28 1 1 Series name 2 Series No. 3 Blank,D H : FH : 28 : Standard 2 D - 50S - 0.5 SH (05) 3 4 5 6 7 6 Termination type : SMT horizontal mounting type 7 specifications (05)…Gold plated,2,000 pieces / reel (10)…Partial gold plated,2,000 pieces / reel (07)…Gold plated(only 40pos.),2,000 pieces / reel (98)…Gold plated,500 pieces / reel : Space saving type 4 Number of positions : 10 to 80 5 Contact pitch : 0.5mm 2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. FH28 Seriesq0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors sConnector Dimensions Standard type 0.5 (0.2) (1.9) A Polarizing mark indicator B 2 Number of contacts indicator 6.5 5.7 1 2 1 (5.4) 0.05MAX 0 0.1MAX C(FPC/FFC insertion slot dimension) D 2.55 0.05MAX 0 (1.3) E 4.5 1.2 (2.85) (3.65) 0.7 0.1MAX Notes 1 The coplanarity of each terminal lead is within 0.1. 2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body. 3 Packaged on tape and reel only. Check packaging specification. 4 Sight variations in color of the plastic compounds do not affect form, fit or function. 5 After reflow, the terminal plating may change color, however this does not represent a quality issue. Unit: mm Part Number FH28-10S-0.5SH(**) FH28-15S-0.5SH(**) FH28D-20S-0.5SH(**) FH28D-28S-0.5SH(**) FH28D-30S-0.5SH(**) FH28-40S-0.5SH(**) FH28-45S-0.5SH(**) FH28D-50S-0.5SH(**) FH28D-55S-0.5SH(**) FH28-60S-0.5SH(**) FH28D-64S-0.5SH(**) FH28D-68S-0.5SH(**) FH28D-74S-0.5SH(**) CL No. CL586-1861-4-** CL586-1868-3-** CL586-1823-5-** CL586-1835-4-** CL586-1827-6-** CL586-1803-8-** CL586-1848-6-** CL586-1808-1-** CL586-1821-0-** CL586-1811-6-** CL586-1813-1-** CL586-1819-8-** CL586-1828-9-** Number of contacts 10 15 20 28 30 40 45 50 55 60 64 68 74 A 4.5 7 9.5 13.5 14.5 19.5 22 24.5 27.0 29.5 31.5 33.5 36.5 B 9.9 12.4 14.9 18.9 19.9 24.9 27.4 29.9 32.4 34.9 36.9 38.9 41.9 C 5.57 8.07 10.57 14.57 15.57 20.57 23.07 25.57 28.07 30.57 32.57 34.57 37.57 D 9.58 12.08 14.58 18.58 19.58 24.58 27.08 29.58 32.08 34.58 36.58 38.58 41.58 Note 1: Tape and reel packaging. Order by number of reels. Note 2: Metal fittings protruded type (FH28E) is available. Contact Hirose for details. Note 3: **Indicates the specification. For details, please refer to ordering information. 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. FH28 Seriesq0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Space saving type 0.5 (0.2) (1.9) A Polarizing mark indicator B Number of contacts indicator 6 5.7 1 (5) 0.05MAX 0 (1.3) E 4.5 1.2 (2.85) (3.15) 0.7 0.1MAX 2 1 0.05MAX 0 0.1MAX 2 2.55 C(FPC/FFC insertion slot dimension) D Notes 1 The coplanarity of each terminal lead is within 0.1. 2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body. 3 Packaged on tape and reel only. Check packaging specification. 4 Sight variations in color of the plastic compounds do not affect form, fit or function. 5 After reflow, the terminal plating may change color, however this does not represent a quality issue. Unit: mm Part Number FH28H-80S-0.5SH(**) CL No. 586-1805-3-** Number of contacts 80 A 39.5 B 44.9 C 40.57 D 45.7 Note1: Tape and reel packaging. Order by number of reels. Note2: **Indicates the specification. For details, please refer to ordering information. 4 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. FH28 Seriesq0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors sRecommended PCB mounting pattern and metal mask dimensions Recommended metal mask thickness: 0.15 mm. H±0.1 J±0.1 H±0.1 J±0.1 2.2±0.1 1.3±0.1 3.9±0.1 1.3±0.1(Land) 4.2±0.1 0.5±0.05 A±0.05 0.3±0.03(Land) 0.25±0.03(Metal mask) 0.5±0.05 A±0.05 0.3±0.03(Land) 0.25±0.03(Metal mask) Standard type(FH28, FH28D) Space saving type(FH28H) sRecommended FPC/FFC dimensions AX .2M AX R0 .2M R0 3.5MIN X 2MA R0. .2 R0 1.4±0.1 W 2.8±0.1 4.5MIN 1 0.5±0.05 0.5±0.1 A±0.05 F±0.07 G±0.1 0.3±0.03 0.3±0.05 0.5±0.1 Notes 1 Straight type FPC / FFC does not have the side-protruding retention tabs (cross-hatched areas). 2 W dimension should be 3.5mm min. Unit: mm Part Number FH28-10S-0.5SH(**) FH28-15S-0.5SH(**) FH28D-20S-0.5SH(**) FH28D-28S-0.5SH(**) FH28D-30S-0.5SH(**) FH28-40S-0.5SH(**) FH28-45S-0.5SH(**) FH28D-50S-0.5SH(**) FH28D-55S-0.5SH(**) FH28-60S-0.5SH(**) FH28D-64S-0.5SH(**) FH28D-68S-0.5SH(**) FH28D-74S-0.5SH(**) FH28H-80S-0.5SH(**) CL No. CL586-1861-4-** CL586-1868-3-** CL586-1823-5-** CL586-1835-4-** CL586-1827-6-** CL586-1803-8-** CL586-1848-6-** CL586-1808-1-** CL586-1821-0-** CL586-1811-6-** CL586-1813-1-** CL586-1819-8-** CL586-1828-9-** CL586-1805-3-** Number of contacts 10 15 20 28 30 40 45 50 55 60 64 68 74 80 F 5.5 8 10.5 14.5 15.5 20.5 23 25.5 28.0 30.5 32.5 34.5 37.5 40.5 G 7.1 9.6 12.1 16.1 17.1 22.1 24.6 27.1 29.6 32.1 34.1 36.1 39.1 42.1 H 10.6 13.1 15.6 19.6 20.6 25.6 28.1 30.6 33.1 35.6 37.6 39.6 42.6 46.7 J 7 9.5 12.0 16.0 17.0 22.0 24.5 27.0 29.5 32.0 34.0 36.0 39.0 42.0 1±0.05(Metal mask) 1.8±0.1 C 0. 5M AX 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. FH28 Seriesq0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors sFH28 Series FPC Construction (Recommended Specifications) 1. Using Single-sided FPC Connecting side FPC : Flexible Printed Circuit Material Name Covering film layer. Cover adhesive Surface treatment Copper foil Base adhesive Base film Stiffener Polyimide Polyimide Total 1 mil thick 3 mil thick Reinforcement material adhesive Thermosetting adhesive 0.2µm thick gold plated over 1 to 5µm thick nickel underplating Material Polyimide 1 mil thick. Thickness (µm) 25 25 3 35 25 25 30 175 293 Cu 1oz Back side 2. Using Double-sided FPC Connecting side FPC : Flexible Printed Circuit Material Name Covering layer film Cover adhesive Surface treatment Through-hole copper Copper foil Base adhesive Base film Base adhesive Copper foil Cover adhesive Covering layer film Stiffener Polyimide Polyimide Total 1 mil thick 1 mil thick Reinforcement material adhesive Thermosetting adhesive Cu 1/2oz Polyimide 1 mil thick 0.2µm thick gold plated over 1 to 5µm thick nickel underplating Material Polyimide 1 mil thick Thickness (µm) 3 15 18 18 25 18 18 25 25 50 100 297 Cu Cu 1/2oz Back side * To prevent release of the lock due to FPC bending, use of the FPC with copper foil on the back side is NOT RECOMMENDED. 3. Using FFC Connecting side FFC : Flexible Flat Cable Material Name Polyester film Adhesive Gold plated annealed copper foil Adhesive Polyester Adhesive Stiffener Back side Material Thickness (µm) 12 Thermoplastic polyester Polyester Polyester Polyester Total 30 35 30 12 30 188 295 4. Precautions 1. This specification is a recommendation for the construction of the FH28 Series FPC and FFC (t=0.3 ± 0.05). 2. For details about the construction, please contact the FPC/FFC manufacturers. 6 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. FH28 Seriesq0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors sPackaging specification q Embossed carrier tape dimensions 1.75±0.1 (Q) (N) M±0.1 K±0.3 (7.1) (8.5) (3) (0.3) 4±0.1 2±0.15 12±0.1 .5 Ø1 .1 +0 0 Standard (FH28,FH28D) 1.75±0.1 .5 Ø1 (0.3) M±0.1 Ø1 .5 (3) 4±0.1 +0 . 01 2±0.15 12±0.1 (3) (0.3) 4±0.1 2±0.15 12±0.1 1.75±0.1 (R) (Q) (N) M±0.1 q Embossed carrier tape dimensions (Q) (N) K±0.3 L±0.1 +0 . 01 (7.1) (8.5) Un-reeling direction 1.5+0.1 0 1.7 +0.15 0 (6.6) (8) Un-reeling direction 1.5 +0.1 0 Standard (FH28,FH28D) (Ø1 Space saving type (FH28H) (S:INSIDE) qReel Dimensions 3) (2) (Ø380) (Ø80) (T:OUTSIDE) End section Mounting section Lead section (400mm min.) Blank section (10 pockets min.) Embossed carrier tape Blank section (10 pockets min.) Top cover tape 1.7 +0.15 0 L±0.1 K±0.3 7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. FH28 Seriesq0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Standard (FH28,FH28D) Part Number FH28-10S-0.5SH(**) FH28-15S-0.5SH(**) FH28D-20S-0.5SH(**) FH28D-28S-0.5SH(**) FH28D-30S-0.5SH(**) FH28-40S-0.5SH(**) FH28-45S-0.5SH(**) FH28D-50S-0.5SH(**) FH28D-55S-0.5SH(**) FH28-60S-0.5SH(**) FH28D-64S-0.5SH(**) FH28D-68S-0.5SH(**) FH28D-74S-0.5SH(**) CL No. CL586-1861-4-** CL586-1868-3-** CL586-1823-5-** CL586-1835-4-** CL586-1827-6-** CL586-1803-8-** CL586-1848-6-** CL586-1808-1-** CL586-1821-0-** CL586-1811-6-** CL586-1813-1-** CL586-1819-8-** CL586-1828-9-** Number of contacts 10 15 20 28 30 40 45 50 55 60 64 68 74 K 24 24 24 32 32 44 44 44 44 56 56 56 56 L ------------------------28.4 28.4 40.4 40.4 40.4 40.4 52.4 52.4 52.4 52.4 M 11.5 11.5 11.5 14.2 14.2 20.2 20.2 20.2 20.2 26.2 26.2 26.2 26.2 N 10.3 8.8 15.3 19.3 20.3 25.3 27.8 30.3 32.8 35.3 37.3 39.3 43.3 Q 5.5 8 10.5 14.5 15.5 20.5 23 25.5 28.0 30.5 32.5 34.5 42.3 S Unit: mm T 29.4 29.4 29.4 37.4 37.4 37.4 49.4 49.4 49.4 61.4 61.4 61.4 61.4 25.4 25.4 25.4 33.4 33.4 33.4 45.4 45.4 45.4 57.4 57.4 57.4 57.4 Space saving type (FH28H) Part Number FH28H-80S-0.5SH(**) CL No. CL586-1805-3-** Number of contacts 80 K 56 L 52.4 M 26.2 N 46.3 Q 45.3 R 40.5 S Unit: mm T 61.4 57.4 8 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. FH28 Seriesq0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors sRecommended Temperature Profile MAX 250ç 250 230ç 200 (ç) Temperature 150 200ç 150ç 100 HRS test condition Solder method :Reflow, IR Solder composition :Paste, 96.5%Sn/3.0%Ag/0.5%Cu (Senju Metal Industry, Co., Ltd.'s Part Number:M705-221CM5-32-10.5) Test board :Glass epoxy 55mm∞150mm∞1.6mm thick Land,Metal mask dimensions : Our recommendations The temperature profiles are based on the above conditions. 50 25ç (60sec.) 0 Start 90 sec. to 120 sec. Preheating 60 120 Time (Seconds) (60sec.) Soldering In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. 9 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. FH28 Seriesq0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors sOperation and Precautions Operation Precautions 1 Do not force the actuator to open beyond its fully open 1.FPC/FFC insertion procedure. Connector installed on the board. 1 Lift up the actuator. Use thumb or index finger position. Do not use any type of tool to open the actuator. 116° 2 Properly insert the FPC at the positioning part of the connector. Locking the FPC while it is partially inserted, may cause lock damage, disconnection of the FPC, or continuity fault. 2 Fully insert the FPC in the connector parallel to mounting surface, with the exposed conductive traces facing down. 3 Do not forcefully bend the FFC/FPC upward. Consult FFC/FPC manufacturer for the recommended bend radiuses. 3 Rotate down the actuator until firmly closed. It is critical that the inserted FPC/FFC is not moved and remains fully inserted. 4 For connectors with multiple contacts, such as 80 pos. rotate down the actuator pushing at both ends. 2.FPC/FFC removal Fully open the actuator. Carefully withdraw the FPC/FFC exercising caution not to deform or damage it. 5 Application of excessive force to the inserted FPC/FFC may cause damage to connector and may affect the reliability of electrical connection. If specific application requires continuous or repeated pull or bend of the inserted FPC/FFC, assure that the forces are NOT transmitted directly to the connector. 10 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. FH28 Seriesq0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors sPrecautions (mating/un-mating FPC with the retention tabs) Operation Precautions 2 Avoid “ride on” 1.How to insert Insert the cable into the interspace between the mold walls ( ) at both ends of entrance where the connector is inserted and the guide walls ( ) at both ends of interior connector so the cable tabs are properly located. Avoid insertion so the cables ride on any guide. Be sure NOT to close the actuator as the cables ride on any guide. It may cause conduction failure. Ride on a left guide Ride on a right guide Correct insertion 2.Precautions when mating /un-mating 1 Avoid insertion in diagonal direction. Do not insert the cable in diagonal direction. A part of the connector may touches the contacts resulting in deformation of the contacts. Do not close the actuator as the cables ride on. Insert the cable straight into the connector and hook the cable tabs with the guide. After insertion, slightly pull the cables to make sure the cable tabs are firmly secured. No removal of the cable means correct insertion. In the event it is locked as the cables ride on a guide, absolutely avoid moving the cable. In this case, open the actuator and re-insert the cable as instructed in “1.How to insert”. 1 Insert the cable straight and obliquely from above. Do not move the cables back and forth and around as the cables ride on the guide when the actuator is closed. 2 Slightly pull the cable to make sure the tabs are firmly secured. 3 Close the actuator. 11