FH3-08S-1.25DS

厂商：
HIROSE
封装：
描述：
FH3-08S-1.25DS - 1.25mm Pitch FPC/FFC Connector - Hirose Electric

数据手册：

下载FH3-08S-1.25DS.pdf

立即购买

详情介绍
数据手册
价格&库存

FH3-08S-1.25DS 数据手册

1.25mm Pitch FPC/FFC Connector FH3 Series sFeatures 1. 1.25mm FPC and FFC DIP Connector The contact pitch is 1.25mm. 2. Contact Reliability This connector has high contact reliability for high voltage contact. 3. Sixteen Types of Contact Numbers This connector consists of 16 kinds of 6, 8, 9, 10, 12, 13, 14, 15, 15, 17, 18, 19, 20, 21, 22, 24, and 30 contacts. sApplications HDD, facsimiles, printers, VTR, etc. sProduct Specifications Rating Rated Current: 1A Rated Voltage: 200V AC Operating Temperature Range:-40~+85ç (Note 1) Storage Temperature Range:-10~+60ç (Note 2) Operating Humidity Range:Relative humidity, 90% max. Storage Humidity Range:Relative humidity, 90% max. (Not dewed) Applicable FPC Item 1. Insulation Resistance 2. Withstand voltage 3. Contact Resistance 4. Mechanical operation 5. Vibration 6. Shock 7. Moisture Resistance in Steady State 8. Temperature Cycle 500Mø min. Neither short or breakdown should occur 20mø max. π FPC conductor resistance included Contact resistance: 40mø max. No part should be broken, cracked or loosened No part should be broken, cracked or loosened No part should be broken, cracked or loosened Insulation resistance: 50Mø min. No part should be broken, cracked or loosened Frequency: 10~55Hz and full amplitude 1.50mm in 3 directions for 2 hours, respectively Acceleration: 490m/S2, duration: 11ms, sine half-wave: in 3 directions for 3 times, respectively Exposed to temperature 40ç and humidity 90~95% for 96 hours 5 cycles under conditions as follows; Temperature: -55ç¡+15~+35¡+85¡+5~+35ç Time: 30¡5 max.¡ 30¡5 max. for 5 minutes Note 1. Temperature rise included when energized Note 2. This storage indicates a long-term storage state for the unused product before board mounted. The operating temperature and humidity ranges are applied to the non-energized state after the connector has been installed in the board. Note 3. The above standards represent this series. The individual formal agreement should be based on the "Specification". 30 cycles t=0.2~0.35 Tin plating Specification Measured at 500V DC 500V AC for 1 minute Measured at 0.1A Condition (Not dewed) D6 sMaterial Part Insulator Contact Material PBT Phosphor bronze Finish Black Tin plating Remarks UL94V-0 ––––––– sOrdering Information Please determine the specific product. If needed, please select and order the product from the product No. as listed on catalog page D8 and D9. FH 3 - 17 S 1.25 DS (01) q q Series Name w Series No. : FH :3 17, 18, 19, 20, 22, 24, 30 r Contact alignment : Single w e r t y u : 1.25mm : DS : Right angle type DSA : Straight type u (01): Tube t Contacts Pitch y Contact Style e Number of Contacts : 4, 6, 8, 10, 12, 13, 14, 15, 16, sFPC · FFC Dimensions Unit: mm Number of Contacts 4 Size 6 6.25 8 10 12 13 15 14 15 16 17 20 18 20 22 24 30 A B 3.75 6.25 8.75 11.25 13.75 16.25 17.5 18.75 20 21.25 23.75 26.25 28.75 36.25 8.75 11.25 13.75 16.25 17.5 18.75 21.25 22.5 23.75 26.25 28.75 31.25 38.75 BPCB Footprints Unit: mm Number of Contacts 4 Size 6 5 8 7.5 10 10 12 12.5 13 15 14 15 15 17.5 16 17.5 17 20 18 20 20 22.5 22 25 24 27.5 30 35 A 2.5 D7 sRight Angle Type Unit:mm Product No. HRS No. Number of Contacts 4 6 8 10 12 13 14 15 16 18 20 22 24 30 A 08.70 11.20 13.70 16.20 18.70 19.95 21.20 22.45 23.70 26.20 28.70 31.20 33.70 41.20 B 06.27 08.77 11.27 13.77 16.27 17.52 18.77 20.02 21.27 23.77 26.27 28.77 31.27 38.77 C 03.75 06.25 08.75 11.25 13.75 15.00 16.25 17.50 18.75 21.25 23.75 26.25 28.75 36.25 Tube Case Packed Quantity 55 42 35 29 25 24 22 21 20 17 16 15 14 11 FH3-04S-1.25DS(01) CL586-0038-0-01 FH3-06S-1.25DS(01) CL586-0065-3-01 FH3-08S-1.25DS(01) CL586-0039-3-01 FH3-10S-1.25DS(01) CL586-0057-5-01 FH3-12S-1.25DS(01) CL586-0058-8-01 FH3-13S-1.25DS(01) CL586-0040-2-01 FH3-14S-1.25DS(01) CL586-0041-5-01 FH3-15S-1.25DS(01) CL586-0078-5-01 FH3-16S-1.25DS(01) CL586-0047-1-01 FH3-18S-1.25DS(01) CL586-0081-0-01 FH3-20S-1.25DS(01) CL586-0048-4-01 FH3-22S-1.25DS(01) CL586-0049-7-01 FH3-24S-1.25DS(01) CL586-0060-0-01 FH3-30S-1.25DS(01) CL586-0050-6-01 D8 sStraight Type Unit:mm Product No. HRS No. Number of Contacts 4 6 8 10 12 13 14 16 17 18 20 22 24 30 A 08.70 11.20 13.70 16.20 18.70 19.95 21.20 23.70 24.95 26.20 28.70 31.20 33.70 41.20 B 06.27 08.77 11.27 13.77 16.27 17.52 18.77 21.27 22.52 23.77 26.27 28.77 31.27 38.77 C 03.75 06.25 08.75 11.25 13.75 15.00 16.25 18.75 20.00 21.25 23.75 26.25 28.75 36.25 Tube Case Packed Quantity 55 42 35 29 25 24 22 20 19 17 16 15 14 11 FH3-04S-1.25DSA(01) CL586-0043-0-01 FH3-06S-1.25DSA(01) CL586-0069-4-01 FH3-08S-1.25DSA(01) CL586-0044-3-01 FH3-10S-1.25DSA(01) CL586-0061-2-01 FH3-12S-1.25DSA(01) CL586-0062-5-01 FH3-13S-1.25DSA(01) CL586-0052-1-01 FH3-14S-1.25DSA(01) CL586-0045-6-01 FH3-16S-1.25DSA(01) CL586-0053-4-01 FH3-17S-1.25DSA(01) CL586-0063-8-01 FH3-18S-1.25DSA(01) CL586-0080-7-01 FH3-20S-1.25DSA(01) CL586-0054-7-01 FH3-22S-1.25DSA(01) CL586-0055-0-01 FH3-24S-1.25DSA(01) CL586-0064-0-01 FH3-30S-1.25DSA(01) CL586-0056-2-01 D9

下载 PDF

FH3-08S-1.25DS

1. 物料型号： - 系列名称：FH系列 - 系列编号：3 - 引脚间距：1.25mm - 引脚数量：4, 6, 8, 10, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 24, 30 - 引脚样式：DS（直角型）和DSA（直通型）

2. 器件简介： - 该连接器为1.25mm间距的FPC和FFC DIP连接器，具有高接触可靠性，适用于高电压接触。

3. 引脚分配： - 引脚数量有16种，从6到30不等。

4. 参数特性： - 额定电流：1A - 操作温度范围：-40~+85°C - 操作湿度范围：相对湿度90%最大 - 存储温度范围：-10~+60°C - 适用FPC厚度：0.2~0.35mm，镀锡

5. 功能详解： - 绝缘电阻：500MΩ最小，500V DC下测量 - 耐电压：500V AC下1分钟，无短路或击穿 - 接触电阻：20mΩ最大（包括FPC导体电阻），0.1A下测量 - 机械操作：接触电阻40mΩ最大，无零件损坏、裂纹或松动，30次循环 - 振动：10~55Hz频率下全振幅1.50mm，3个方向2小时，无零件损坏、裂纹或松动 - 冲击：490m/S²加速度，11ms持续时间，正弦波，3个方向或3次，无零件损坏、裂纹或松动 - 潮湿状态下的绝缘电阻：50MΩ最小，暴露在40°C温度和90~95%湿度下96小时 - 温度循环：-55°C→+15~+35→+85+5~+35°C，5个周期，无零件损坏、裂纹或松动

6. 应用信息： - 应用于硬盘驱动器、传真机、打印机、VTR等。

7. 封装信息： - 封装材料：PBT（聚对苯二甲酸丁二醇酯） - 镀层：锡

FH3-08S-1.25DS 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“FH3-08S-1.25DS”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

FH3-08S-1.25DS

相关技术文章