FX8-120P-SV

0.6mm Pitch Stacking Height 3mm to 16mm Connector FX8, FX8C Series FX8 Series FX8C Series Note that FX8 series and FX8C series are not mated with each other. sFeatures 1. Stacking Height 3mm to 16mm available The board to board stacking height can correspond to 3mm~16mm. qStacking Height 3,4mm-FX8 Series 2. SMT Coplanarity The coplanarity of the SMT solder area lead is maintained at the high accuracy of less than 0.1mm. 3,4mm 3. Mating Guide The very small and guide rib is provided, and secures ±0.6mm self-alignment, considering the mating operativity into accounts. 4. Mis-insertion Prevention The boss prevents mis-insertion in the board to cause due to the boss position and boss diameter. qStacking Height 5 to 16mm-FX8C Series 5. Two-piece Connection Product In order to enhance the mating reliability for the fine pitch connector using two-pieces, the two-pieces of connectors are combined by our unique method, and can secure the mount position accuracy. In such a new concept, the two-piece connected product is prepared at every number of contacts (The standard mating pitch for the two-piece interconnected product in two rows is 11mm.) 5 to 16mm sApplications Note pc, business equipments, which require miniaturization or light-weight A226 FX8 Series sProduct Specifications Rating Current rating 0.4A Voltage rating 100V AC Operating Temperature Range -55ç to +85ç Note 1. Operating Humidity Range -40% to 80% Storage Temperature Range -10ç to +60ç Note 2. Storage Humidity Range 40% to 70% Condition 250V DC 300V AC/1 minute 100mA Item 1. Insulation Resistance 2. Withstanding voltage 3. Contact Resistance 4. Vibration 6. Temperature Cycle 1000M ohms min Specification No flashover or insulation breakdown. 45m ohms max. No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Contact resistance: 55m ohms max.: Insulation resistance: 100M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% Contact resistance: 55m ohms max.: Insulation resistance: 100M ohms min. (-55ç: 30 minutes, 15 to 35ç: 2 to 3 minutes (-85ç: 30 minutes, 15 to 35ç: 2 to 3 minutes) 5 cycles 7. Durability (Mating/un-mating) Contact resistance: 55m ohms max. 50 cycles 8. Resistance to Soldering heat No deformation of components affecting performance. Reflow: At the recommended temperature profile Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. sMaterial Part Insulator Header Contact Material PBS Phosphor bronze Contact area Lead area Contact area Lead area Finish Light brown Gold plated Tin-lead plated Gold plated Remarks UL94V-0 ––––––– ––––––– Receptacle Contact Phosphor bronze Note : The black dots on the insulater will not affect performance. sOrdering Information qSingle Product FX8 q - 120 P - SV 1 (22) w e r t y 1 : +1mm y Package Form None (21) : Tray package product : Tube packaging product t Product height variation None...Standard (Minimum low profile) q Series Name : FX8 w Number of Contacts :60, 80, 90, 120, 140 e Connector type r Contact type P : Header S : Receptacle SV : Board vertical type (22) : Emboss tape package product *The embossed tape packaging product is prepared for all number of contacts, except for 140 contacts. qtwo-pieces Connection Product q Series Name FX8 q :FX8 - 120/120 P 11 - SV 1 J w e r t yu SV...Board vertical type 1 : +1mm u J: two-pieces connection product r Connector to Connector Pitch t Contact type : w Number of Contacts: 60∞2, 80∞2, 90∞2, 100∞2, 120∞2, 140∞2 Example: 120/120 = 240 contacts e Connector Type : P : Header y Product height variationBlank:Standard (Minimum low profile) S : Receptacle *The standard delivery packaging of the two-piece connection product is the tray packaging. A227 BStacking Height Variation qSingle Product FX8-**P-SV FX8-**S-SV 3mm FX8-**P-SV1 4mm 3 to 4 qtwo-pieces Connection Product FX8-**/**P11-SVJ FX8-**/**S11-SVJ 3mm FX8-**/**P11-SV1J 4mm BMating Sectional View (The above illustration represents the stacking height 3mm type.) A228 sHeader (Single Product) s[FX8-**P-SV] Unit: mm Part Number FX8-060P-SV(**) FX8-080P-SV(**) FX8-090P-SV(**) FX8-100P-SV(**) FX8-120P-SV(**) FX8-140P-SV(**) CL No. 578-0001-6-** 578-0003-1-** 578-0004-4-** 578-0005-7-** 578-0006-0-** 578-0007-2-** Number of Contacts 60 80 90 100 120 140 A 24.60 30.60 33.60 36.60 42.60 48.60 B 23.00 29.00 32.00 35.00 41.00 47.00 C 20.70 26.70 29.70 32.70 38.70 44.70 D 17.40 23.40 26.40 29.40 35.40 41.40 E 22.20 28.20 31.20 34.20 40.20 46.20 Tube packaging Quantity (Pieces) 21 17 15 14 12 10 **None: Tray packaging product, 21: Tube packaging product, 22: Embossed tape packaging product Note 1: To order the tube packaging product, determine a quantity for delivery,multiplying the tube packaging product by an integer. Note 2: The embossed tape package product is prepared for all number of contacts, except for 140 contacts. In addition, the product will be procured by the reel unit at 1 reel = 1000 pieces. Please refer to the delivery form item on page A235 for details. s[FX8-**P-SV1] Unit: mm Part Number FX8-060P-SV1(**) FX8-080P-SV1(**) FX8-090P-SV1(**) FX8-100P-SV1(**) FX8-120P-SV1(**) FX8-140P-SV1(**) CL No. 578-0041-0-** 578-0043-6-** 578-0044-9-** 578-0045-1-** 578-0046-4-** 578-0047-7-** Number of Contacts 60 80 90 100 120 140 A 24.60 30.60 33.60 36.60 42.60 48.60 B 23.00 29.00 32.00 35.00 41.00 47.00 C 20.70 26.70 29.70 32.70 38.70 44.70 D 17.40 23.40 26.40 29.40 35.40 41.40 E 22.20 28.20 31.20 34.20 40.20 46.20 Tube packaging Quantity (Pieces) 21 17 15 14 12 10 **None: Tray packaging product, 21: Tube packaging product, 22: Embossed tape packaging product Note 1: To order the tube packaging product, please determine a quantity for delivery,multiplying the tube package product by an integer. Note 2: The embossed tape package product is prepared for the entire number of contacts, except for 140 contacts. In addition, the product will be sold by the reel unit when 1 reel = 1000 pieces. Please refer to the delivery form item on page A235 for details. A229 sReceptacle (Single Product) s[FX8-**S-SV] Unit: mm Part Number FX8-060S-SV(**) FX8-080S-SV(**) FX8-090S-SV(**) FX8-100S-SV(**) FX8-120S-SV(**) FX8-140S-SV(**) CL No. 578-0201-5-** 578-0203-0-** 578-0204-3-** 578-0205-6-** 578-0206-9-** 578-0207-1-** Number of Contacts 60 80 90 100 120 140 A 24.60 30.60 33.60 36.60 42.60 48.60 B 23.05 29.05 32.05 35.05 41.05 47.05 C 20.80 26.80 29.80 32.80 38.80 44.80 D 17.40 23.40 26.40 29.40 35.40 41.40 E 22.20 28.20 31.20 34.20 40.20 46.20 Tube packaging Quantity (Pieces) 21 17 15 14 12 10 **None: Tray packaging product, 21: Tube packaging product, 22: Embossed tape packageing product Note 1: To order the tube packaging product, determine a quantity for delivery,multiplying the tube packaging product by an integer. Note 2: 0The embossed tape package product is prepared for the entire number of contacts, except for 140 contacts. In addition, the product will be sold per reel when 1 reel = 1000 pieces. Please refer to the delivery form item on page A235 for details. BPCB mounting pattern Header Receptacle A230 sHeader (Two-piece Connection Product) s[FX8-**/**P11-SVJ] Unit: mm Part Number FX8-060/060P11-SVJ FX8-080/080P11-SVJ FX8-090/090P11-SVJ FX8-100/100P11-SVJ FX8-120/120P11-SVJ FX8-140/140P11-SVJ CL No. 578-0101-0 578-0103-6 578-0104-9 578-0105-1 578-0106-4 578-0107-7 Number of Contacts 60∞2 80∞2 90∞2 100∞2 120∞2 140∞2 A 31.70 37.70 40.70 43.70 49.70 55.70 B 24.70 30.70 33.70 36.70 42.70 48.70 C 23.00 29.00 32.00 35.00 41.00 47.00 D 20.70 26.70 29.70 32.70 38.70 44.70 E 17.40 23.40 26.40 29.40 35.40 41.40 F 22.20 28.20 31.20 34.20 40.20 46.20 Note : The two-piece connection product is packaged by tray. s[FX8-**/**P11-SVJ1J] Unit: mm Part Number FX8-060/060P11-SV1J FX8-080/080P11-SV1J FX8-090/090P11-SV1J FX8-100/100P11-SV1J FX8-120/120P11-SV1J FX8-140/140P11-SV1J CL No. 578-0141-5 578-0143-0 578-0144-3 578-0145-6 578-0146-9 578-0147-1 Number of Contacts 60∞2 80∞2 90∞2 100∞2 120∞2 140∞2 A 31.70 37.70 40.70 43.70 49.70 55.70 B 24.70 30.70 33.70 36.70 42.70 48.70 C 23.00 29.00 32.00 35.00 41.00 47.00 D 20.70 26.70 29.70 32.70 38.70 44.70 E 17.40 23.40 26.40 29.40 35.40 41.40 F 22.20 28.20 31.20 34.20 40.20 46.20 Note : The two-piece product is packaged by tray. A231 sReceptacle (two-piece Connection Product) s[FX8-**/**P11-SVJ] Unit: mm Part Number FX8-060/060S11-SVJ FX8-080/080S11-SVJ FX8-090/090S11-SVJ FX8-100/100S11-SVJ FX8-120/120S11-SVJ FX8-140/140S11-SVJ CL No. 578-0301-0 578-0303-5 578-0304-8 578-0305-0 578-0306-3 578-0307-6 Number of Contacts 60∞2 80∞2 90∞2 100∞2 120∞2 140∞2 A 31.70 37.70 40.70 43.70 49.70 55.70 B 24.60 30.60 33.60 36.60 42.60 48.60 C 23.05 29.05 32.05 35.05 41.05 47.05 D 20.80 26.80 29.80 32.80 38.80 44.80 E 17.40 23.40 26.40 29.40 35.40 41.40 F 22.20 28.20 31.20 34.20 40.20 46.20 Note 1: The two-piece connection product is packaged by tray. BPCB mounting pattern Header Receptacle A232 BDetailed Figure After Joint Removal (two-piece Connection Product) Header Receptacle A233 BConnector Precautions for use 1. Tolerance Clearance on Mating Side The effective contact length of the product is set to 0.7mm. Please use the product so as to set the clearance to less than 0.2mm between the header and the receptacle in the mating process. 2. Fixation between Mounting Boards The very low profile and compact product, so never fix the connector between boards by mating force only 3. Stacking Height Tolerance for Mating Stack 3mm Stack 4mm 3 4 +0.3 _0.2 +0.3 _0.2 mm mm Note: Please Note that the above stacking tolerance doesn't include the solder paste thickness. 4. Handling two-piece connection Product Both joint bars of the two-piece connection product are fixed by the joint members, but the mating cannot be implemented in that state. Before mating, remove the joint bars as if pull it up. (Don't remove the joint members, before mounting on the board.) Before removing joint bar After removing joint bar 5. Mounting Temperature Profile (Reference) Applicable Conditions Reflow system Solder Test board Metal mask thickness :IR reflow :Paste type 63 Sn/37 Pb (Flux content 11 wt%) :Glass epoxy 161mm x 100mm x 1.6 mm :0.15 mm Recommended temperature profile. The temperature may be slightly changed according to the solder paste type and amount. A234 BPackaging Type Packaging Type Tube packaging Number of contacts Product Pieces Unit Packaged Sales Tube Total Length Tape Width Product Pitch Embossed Tape Packaging Emboss Reel Diameter Product Pieces Unit Packaged Sales *The above packaging describes about the single product only. In addition, the packaging of the two-piece connection product is packaged by tray. 44mm 44mm 60 contacts 80 contacts 90contacts 100 contacts 120 contacts 140 contacts 21 pieces 17 pieces 15 pieces 14 pieces 12pieces 10pieces Deliver multiplying product pieces (60 contacts: 21, 42...) 550mm±2mm 44mm 12mm Refer to the table on catalog page A236. 1000 pieces per reel Per reel 56mm 56mm 72mm BPackaging Specification [Tube packaging] qHeader [FX8-**P-SV (21)] [FX8-**P-SV1 (21)] qReceptacle [FX8-**S-SV (21)] A235 [Embossed Tape Package] qEmbossed Carrier Tape Dimensions [26.2] *The above pattern represents the receptacle connector case. [52.4] [56] Unit: mm P/S Header Receptacle Product No. FX8-**P-SV (22) FX8-**P-SV1 (22) FX8-**S-SV (22) 6.0 8.4 A 5.5 B 7.9 C 3.2 4.2 2.6 12 D E Ø 330 Ø 360 Ø 330 ** : Number of Contacts qReel Dimensions (FREE) [58] A236