GT11-2S-6.0C

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT11 Series — Connectors for coaxial cables — Features Cost efficient termination Highly efficient and reliable single motion crimp termination allows high volume production with semiautomatic equipment. Lock-release latching system Shock / vibration resistant electrical connections Verification of the full contact insertion 77 For Double-Conductor coaxial shielded cable F Connectors Outer terminals Part Number GT11-2S-5.2C GT11-2S-6.0C CL No. 761-0002-3 761-0028-7 Applicable Cable 4.5 to 5.2mm 5.8 to 6.2mm Item Outer terminal Insulator Material Brass PT Finish Tin plating Color: Dark gray * The suitable terminals might differ depending on the internal structure of the cable. Inner Terminals Part Number GT11-1822SCF GT11-2428SCF CL No. 761-0004-9 761-0020-5 Conductor Size (AWG) #18 to 22 #24 to 28 Material Brass Finish Tin plating Packaging 8,000 pcs. per reel M Connectors Outer terminals Part Number GT11-2P-5.2C GT11-2P-6.0C CL No. 761-0001-0 761-0027-4 Applicable Cable 4.5 to 5.2mm 5.8 to 6.2mm Item Outer terminal Insulator Material Brass PT Finish Tin plating Color: Dark gray * The suitable terminals might differ depending on the internal structure of the cable. Inner Terminals Part Number GT11-1822PCF GT11-2428PCF CL No. 761-0003-6 761-0019-6 Conductor Size (AWG) #18 to 22 #24 to 28 Material Brass Finish Tin plating Packaging 8,000 pcs. per reel 78 For Double-Conductor coaxial cable F Connectors Housing BShown with inserted retainer Part Number GT11-2S-HU CL No. 761-0005-1 Material PBT Color Light gray M Connectors Housing BShown with inserted retainer Part Number GT11-2P-HU CL No. 761-0006-4 Material PBT Color Light gray BShown with inserted retainer BFully mated connector assemblies Part Number GT11N-2PP-HU CL No. 761-0008-0 Material PBT Color Light gray 79 M Connectors Housing BRecommended Board Mounting Pattern For outer conductor For inner conductor パネル Part Number CL No. Material Finish ---Tin plating ---Tin plating Color Light gray ---Dark gray ---- GT11-2S-HU PBT Brass 761-0005-1 PBT Phosphor bronze Housing (2-position Type) BFully mated connector assemblies BRecommended Panel Cut-out 基板 BRecommended Board Mounting Pattern For outer conductor For inner conductor Part Number CL No. Material Finish ---Tin plating ---Tin plating Color Light gray ---Dark gray ---パネル GT11X-2/2P-DS PBT Brass 761-0022-0 PBT Phosphor bronze Housing (Straight Type) BRecommended Board Mounting Pattern BFully mated connector assemblies Part Number GT11-2P-DSA CL No. 761-0038-0 80 Waterproof type For Double-Conductor coaxial cable F Connectors Housing BFully mated connector assemblies Part Number GT11W-2P-HU CL No. 761-0023-3 Material PBT M Connectors Housing Part Number GT11W-2S-HU CL No. 761-0024-6 Material PBT Retainer (used with GT11W-2S-HU and GT11W-2P-HU) Part Number GT11W-6.0R CL No. 761-0025-9 Applicable Cable PBT Silicon rubber compound 81 Waterproof type For Double-Conductor coaxial cable F Connectors Housing BShown with inserted retainer Part Number GT11K-2/2S-HU CL No. 761-0039-3 Material PBT Color Light gray * Mates only with GT11KN-2/2PP-HU. M Connectors Housing BShown with inserted retainer Part Number CL No. Material PBT Color Light gray GT11KN-2/2PP-HU 761-0040-2 82 BTermination sequence 1Strip the cable. Shield 6Insert the internal terminals into the Outer terminals. The joined side of the crimp portion faces upward (for both male and female). Cable 2Cut the shield and expose the wire. Wire 7Crimp the Outer terminal. 3Cut back the shield above the sheath and wrap with conductive tape. The shield must be visible. Jig used: Outside tube caulking jig. (Refer to Page 91 for detail.) 8Insert the terminal into the housing. (Please insert until the terminal is stopped by the lance.) 4Strip the wire and form it. Conductor Jig used: Cable-forming strip jig (Refer to Page 85 for detail.) 5Crimp the wire to the internal terminal. 1mm max. 9Mount the retainer to complete the task. Jig used: Automatic crimping machine. (Refer to Page 85 for detail.) Refer to Page 84 for information about the retainer mounting method. 83 BRetainer Mounting Method a. Insert so that the terminal locking tab is inserted between the top surface of the terminal and the housing. b. Push in while changing the angle of the retainer until the front surface comes to a stop. c. Press the rear portion of the retainer and snap it into the locked position. d. If locking is not complete, press the rear portion of the retainer again while pulling it backward. * Check that all locations are locked. * Check that the bands are housed in all of the receiving areas. 84 BTermination Tools User's manuals are available. Please ask your Hirose Electric account representative. Cable-Forming Strip Jig (for 2-conductor cable) Main Unit Accessory (Electrical Box) Specifications Capacity Mounting Dimensions Approximately 400 W x 500 D x 300 H Weight Power supply Approximately 40 kg Remarks Approximately 300 W x 250 D x 200 H Approximately 5 kg AC100V (50/60Hz) 5-6Kgf/cm Approximately 14 seconds Part Number CT11-ST/AD Air pressure Task time Automatic Crimping Machine (for 2-conductor and 8-conductor cable) Specifications Item Capacity Stroke Number of strokes Weight Motor Crimping speed Specification 1.5tons 30mm 200spm (50Hz) 75kg 0.2kW 2000 to 4000 pcs. per day AC100V 200spm (60Hz) Remarks Part Number CM-105 Cable-Forming Strip Jig (for 2-conductor cable) Main Unit Accessory (Electrical Box) Specifications Specification Mounting Dimensions Approximately 300 W x 400 D x 300 H Weight Power supply Air pressure Approximately 25 kg Remarks Approximately 300 W x 250 D x 200 H Approximately 5 kg AC100V (50/60Hz) 5-6Kgf/cm Part Number CT11-CT/AD * Crimp height setting tables are available for each cable type. Please contact your nearest Hirose Electric account representative. Different cables will require different crimp height settings. 85 For 8-Conductor coaxial shielded cable F Connectors Inner Terminal Part Number GT11-1822SCF GT11-2428SCF CL No. 761-0004-9 761-0020-5 Conductor Size (AWG) Material #24 to 28 Phosphor bronze #24 to 28 Phosphor bronze Finish Tin plating Tin plating Insulator Part Number GT11-8DS-2.8C CL No. 761-0014-2 Material PBT Outer terminals Part Number GT11-8DS-5C CL No. 761-0015-5 Material Brass Finish Phosphor bronze 86 Shield Plate Part Number GT11-8DS-SB CL No. 761- 0016-8 Material Brass Finish Tin plating Housing Part Number GT11-8DS-HU CL No. 761-0017-0 Material PBT Retainer (used with GT11-8DS-HU) Part Number GT11-8DS-6R CL No. 761-0018-3 Material PBT 87 M Connectors Inner Terminals Part Number GT11-1822PCF GT11-2428PCF CL No. 761-0003-6 761-0019-6 Conductor Size (AWG) Material #18 to 22 Phosphor bronze #24 to 28 Phosphor bronze Finish Tin plating Tin plating Insulator Part Number GT11-8DP-2.8C CL No. 761-0009-2 Material PBT Outer terminals Part Number GT11-8DP-5C CL No. 761-0010-1 Material Brass Finish Phosphor bronze 88 Shield Plate Part Number GT11-8DP-SB CL No. 761-0011-4 Material Brass Finish Phosphor bronze Housing Part Number GT11-8DP-HU CL No. 761-0012-7 Material PBT Retainer (Used with GT11-8DS-HU) Part Number CL No. GT11-8DP-6R 761-0013-0 * Reserved for product expansion Material PBT 89 Printed Circuit Board Type BRecommended Board Mounting Pattern BFully mated connector assemblies Board Part Number CL No. GT11-8DP-2.8DS 761-0021-8 Item Material Housing PBT Outer Terminal Phosphor bronze Insulator PBT Terminal Brass Finish Tin plating Tin plating 90 BTermination sequence 1Strip the Cable. 6Insert the inner terminals into the insulated case. Inner terminal Cable Shield 2Cut the shield and expose the wire. Wire 7Insert what was made in Step 6 into the Outer terminals. Outer terminals 3Cut back the shield above the sheath and wrap with conductive tape. Conductive tape 8Insert the caulking shield cover onto the Outer terminals. Shield cover 4Strip the wire. 9Insert what was made in Step 8 into the housing. Housing 5Crimp the internal terminals. !0Insert the retainer. Internal terminals Retainer Completion 91 BTermination Tools User's manuals are available. Please ask your Hirose Electric account representative. Cable-Forming Strip Jig (for 2-conductor cable) Main Unit Accessory (Electrical Box) Specifications Capacity Mounting Dimensions Approximately 400 W x 500 D x 300 H Weight Power supply Air pressure Task time Approximately 40 kg Remarks Approximately 300 W x 250 D x 200 H Approximately 5 kg AC100V (50/60Hz) 5-6Kgf/cm Approximately 14 seconds Part Number CT11-ST/AD Automatic Crimping Machine (for 2-conductor and 8-conductor cable) Specifications Item Capacity Stroke Number of strokes Weight Motor Crimping speed 1.5Ton 30mm 200 spm (50Hz) 75kg 0.2kW 2000 to 4000 pcs. per day AC100V 240spm (60Hz) Specification Remarks Part Number CM-105 Cable-Forming Strip Jig (for 2-conductor cable) Main Unit Accessory (Electrical Box) Specifications Specification Mounting Dimensions Approximately 300 W x 400 D x 300 H Weight Power supply Air pressure Approximately 25 kg Remarks Approximately 300 W x 250 D x 200 H Approximately 5 kg AC100V (50/60Hz) 5-6Kgf/cm * Crimp height setting tables are available for each cable type. Please contact your nearest Hirose Electric account representative. Different cables will require different crimp height settings. Part Number CT11-CT/AD Outer terminal Caulking Jig (for 8-conductor cable) Hand Press Part Number GT11-8S/P-HP 92