GT12-2022PCF

Interface Portions and In-line Portions of the Various Units and Devices GT12 Series — 2 mm Pitch, Miniature ECU Connectors — Features 2 mm pitch type connector Low insertion and removal force compared with the Hirose Electric GT10 Series. Built to solve the problem of terminal deformation at time of wire crimping. 2003.7 F Connectors Board Type Housing Insulator Outer terminal Anchor pin Terminal Center terminal Use tapping screw of diameter 2mm. BRecommended PCB Mounting Pattern BRecommended Panel Cut-out Board Panel Board Hole for anchor pin Panel Part Number CL No. GT12M-20/1DS-DS 762-0001-7 Item Housing Terminal Insulation Inner terminal Outer terminal Material PBT Copper alloy PBT Brass Brass Finish Color: Black Tin plating Color: Dark gray Tin plating Tin plating 2 M Connectors Terminals Part Number GT12-2022PCF GT12-2428PCF CL No. 762-0007-3 762-0005-8 Conductor Size (AWG) Outer Diameter #20 to 22 1.1 to 1.3 #24 to 28 0.8 to 1.1 Material Brass Finish Packaging Tin plating 10,000 pcs. per reel Housing (GT12 Series Hybrid Type) Combination Cable Type (20 Signal Lines + 1 Coaxial Cable) BDiagram of Attached Cover Contact Contact Part Number CL No. Material Color GT12M-20/1DP-HU 762-0002-0 PBT Black Note 1: Terminal for the coaxial cable are the GT5 Series. Note 2: This product is used in conjunction with the cover. Plug-in Type (20 Signal Lines + 1 Coaxial Cable) BRecommended Panel Cut-out Panel Contact Side View BMounted and fully mated connector assemblies Contact Use tapping screw of diameter 3mm. Part Number CL No. Material Color GT12M-20/1DPP-HU 762-0004-5 PBT Black Note: Terminal for the coaxial cable are the GT5 Series. Top View 3 Cover Cover A Part Number CL No. Material GT12M-20/1DP-CV8.7R 762-0003-2 PBT Color Black Cover B Note 1: This product suits cables having an outside diameter of 8.6 to 8.8 mm. Note 2: This product is sold as a set of cover and screws. Cable Clamp Terminal Part Number GT12M-8.7CP CL No. Material 762-0008-6 Brass Note: This terminal suits cables having an outside diameter of 8.6 to 8.8 mm. 4