HIF5D-20DA-2.54R

Card Edge Type Ribbon Cable Connector HIF5 Series s Features 1. Product Variation The area to install the connector body is classified into three types according to full hole mounting area, semi-mounting area and non-mounting area. 2. Mounting Density Enhancement This connector is designed so that the ribbon cable can turn back within the connector molding range. The connector can be installed without coming out of the insulator. 3. Applicable Cable The applicable cable is a AWG#28 flat cable (7 pcs./0.127mm, jacket dia.: 0.8~1.0mm). s Applications Computers, FDD, various kinds of electronic equipment. s Product Specifications Rating Item 1. Insulation Resistance 1000M ohms min. 2. Withstanding voltage No flashover or insulation breakdown. 3. Contact Resistance 15m ohms max. 4. Vibration No electrical discontinuity of 1µs or more 5. Humidity (Steady state) Insulation resistance: 1000M ohms min. 6. Temperature Cycle No damage, cracks, or parts looseness. 7. Durability (Mating/un-mating) Contact resistance15m ohms max. 8. Resistance to Soldering heat No deformation of components affecting performance. Current rating: 1A Voltage rating: 200V AC Specification 500V DC 650V AC/1 minute 0.1A Operating Temperature Range:–55 to +85ç (Note 1) Operating Moisture Range:40 to 80% Storage Temperature Range:–10 to +60ç(Note 2) Storage Humidity Range:40 to 70% (Note 2) Condition Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% (–55ç: 30 minutes ➝15 to 35ç: 5 minutes max. 125ç: 30 minutes ➝15 to 35ç: 5 minutes max.) 5 cycles 500 cycles Flow: 260ç for 10 seconds Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. s Material Part Insulator Contact Material PBT Copper alloy Contact area Connection area Finish Black Gold plated Tin-lead plated Remarks UL94V-0 --------------- s Ordering Information HIF5 1 1 Series Name: HIF 5 B - * D A - 2.54 R 2 3 4 5 6 7 4 Contact alignment: D : Double 5 Plating type: A : Selective gold plated 6 Contact Pitch: 2.54mm 7 Connection type: R : Ribbon cable 2 Mold type B: With full mounting hole C: With half mounting hole D: Without mounting hole 3 Number of contacts: 20, 26, 34, 40, 50, 60 B55 s With Mounting Full Hole Part Number CL No. Number of Contacts 20 26 34 40 50 60 A 56 B C D E F H HIF5B-20DA-2.54R 564-0014-5 HIF5B-26DA-2.54R 564-0015-8 HIF5B-34DA-2.54R 564-0016-0 HIF5B-40DA-2.54R 564-0017-3 HIF5B-50DA-2.54R 564-0018-6 HIF5B-60DA-2.54R 564-0019-9 48.26 36.04 28.04 22.86 24.13 33.54 63.62 55.88 43.66 35.66 30.48 31.75 41.16 73.78 66.04 53.82 45.82 40.64 41.91 51.32 81.40 73.66 61.44 53.44 48.26 49.53 58.94 94.10 86.36 74.14 66.14 60.96 62.23 71.64 106.8 99.06 86.84 78.84 73.66 74.93 84.34 s With Mounting Half hole Part Number CL No. Number of Contacts 20 26 34 40 50 60 A B C D E F H HIF5C-20DA-2.54R 564-0020-8 HIF5C-26DA-2.54R 564-0021-0 HIF5C-34DA-2.54R 564-0022-3 HIF5C-40DA-2.54R 564-0023-6 HIF5C-50DA-2.54R 564-0024-9 HIF5C-60DA-2.54R 564-0025-1 50.80 45.72 36.04 28.04 22.86 24.13 33.54 58.42 53.34 43.66 35.66 30.48 31.75 41.16 68.58 63.50 53.82 45.82 40.64 41.91 51.32 76.20 71.12 61.44 53.44 48.26 49.53 58.94 88.90 83.82 74.14 66.14 60.96 62.23 71.64 101.6 96.52 86.84 78.84 73.66 74.93 84.34 B56 s Without Mounting Hole Part Number CL No. Number of Contacts 20 26 34 40 50 60 A B C D E HIF5D-20DA-2.54R 564-0026-4 HIF5D-26DA-2.54R 564-0027-7 HIF5D-34DA-2.54R 564-0028-0 HIF5D-40DA-2.54R 564-0029-2 HIF5D-50DA-2.54R 564-0030-1 HIF5D-60DA-2.54R 564-0031-4 36.04 28.04 22.86 24.13 33.54 43.66 35.66 30.48 31.75 41.16 53.82 45.82 40.64 41.91 51.32 61.44 53.44 48.26 49.53 58.94 74.14 66.14 60.96 62.23 71.64 86.84 78.84 73.66 74.93 84.34 B57 BPCB Dimensions Number of Contacts A B 20 22.86 27.84 26 30.48 35.46 34 40.64 45.62 40 48.26 53.24 50 60.96 65.94 60 73.66 78.64 Note. Using the polarizing key prevents mis-insertion in the printed board. For use, insert the polarizing key so as to hit the mold bottom. BPolarizing Key Part Number CR7C-GPIN HIF5B-GPIN CL No. 507-0055-8 564-0052-4 Material Poly acetal resin, white PBT, beige BPanel Cutouts Unit: mm Number of Contacts mounting Half hole mounting Full hole size A size A 20 45.72 48.26 26 53.34 55.88 34 63.50 66.04 40 71.12 73.66 50 83.82 86.36 60 96.52 99.06 B58 BConnection Procedures Note 1. Cable length tolerance Less than 500 +100 (mm) More than 500 pcs. % +3 0 Note 2. When a cable such as a twist cable or a slit (like a roller screen) cable is used, the cable pitch will slightly change according to cable manufacturers. If connection failure has occurred, consult HRS Sales Department. HIF5B Type HIF5B Type (No cable clamp) AO Connection AO Connection HIF5B Type HIF5B Type (No cable clamp) BO Connection BO Connection HIF5B Type HIF5B Type (No cable clamp) CO Connection CO Connection HIF5B Type HIF5B Type (No cable clamp) DO Connection DO Connection HIF5C Type HIF5C Type (No cable clamp) AO Connection HIF5C Type AO Connection HIF5C Type (No cable clamp) BO Connection BO Connection B59 HIF5C Type HIF5C Type (No cable clamp) CO Connection CO Connection HIF5C Type HIF5C Type (No cable clamp) DO Connection DO Connection HIF5D Type HIF5D Type (No cable clamp) AO Connection AO Connection HIF5D Type HIF5D Type (No cable clamp) BO Connection BO Connection HIF5D Type HIF5D Type (No cable clamp) CO Connection CO Connection HIF5D Type HIF5D Type (No cable clamp) DO Connection DO Connection B60