HIF6-060PA-1.27DSA

1.27mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type qHIF3B Series (MIL-C-83503) qHIF2 Series (Board direct mount type) 1 qHIF5 Series (Card edge type) 2 sFeatures 1. Product Variation The connection method is available with the board to board type and insulation displacement type. 2. Broad applications HIF2E, HIF3B and HIF5 can be combined one other, because the 1.27mm pitch flat cable is used. qRC Series (Micro ribbon connector) qFD Series (D sub-ribbon connector) 3. Applicable Cables The applicable cable is a (UL2651) AWG #28 flat cable (7cores: 0.127mm, outer jacket diameter: 0.8 to1.0mm) 4. Mis-insertion Preventive Structure The mis-insertion preventive guide prevents misinsertion. Photo1 (For further information, refer to catalog page A133.) sApplications Computers, peripheral and terminal equipment, PPC, various kinds of electronic equipment, Office Automation machines sProduct Specifications Rating Current rating: 0.5A Operating Temperature Range: -55 to +85 ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2) Operating Humidity Range: 40 to 70% (Note 2) Voltage rating: 125V AC Operating Humidity Range: 40 to 80% Item 1.Insulation Resistance 1000M ohms min. Specification 250V DC 300V AC/1 minute. 0.1A Condition 2.Withstanding Voltage No flashover or insulation breakdown. 3.Contact Resistance 4.Vibration 30m ohms max. No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% (-65ç: 30 minutes¡15 to 35ç: 5 minutes max.¡ 125ç: 30 minutes¡15 to 35ç: 5 minutes max.) 5 cycles 500 cycles Flow: 260ç for 10 seconds Manual soldering: 300ç for 3 seconds 5.Humidity (Steady state) Insulation resistance: 1000M ohms min. 6.Temperature Cycle No damage, cracks, or parts looseness. 7.Durability (Mating/un-mating) Contact resistance: 30m ohms max. 8.Resistance to Soldering heat No deformation of components affecting performance. Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. A116 sMaterial Parts Insulator Socket Contact Pin header Contact Material PBT Copper alloy Brass Finish Black Selective gold plating Remarks UL94V-0 ———— sOrdering Information qSocket and Receptacle HIF6 A – * D A – 1.27 DSA L q w e r t y u i q Series Name : HIF6 w Blank : Ribbon cable insulation displacement type : With board mounting hole : Without board mounting hole : Socket or receptacle : Selective gold plated : Right angle type : Ribbon cable ID type A B r t e Number of contacts : 20, 26, 32, 34, 40, 50, 52, 60, 68, 80, 100 D A y Contact pitch : 1.27mm u Contact type : DS DSA : Straight type R i L : Board pre-fixed lock pin qPin Header HIF6 A – * P A – 1.27 DSA L q w e r t y u i q Series Name : HIF6 w Blank : With lock : With board mounting hole : Without board mounting hole : Pin header : Selective gold plated : Right angle type : Straight type A B r t e Number of contacts : 20, 26, 32, 34, 40, 50, 52, 60, 68, 80, 100 P A y Contact pitch : 1.27mm u Contact style : DS DSA i L : Board pre-fixed lock pin A117 BFunction Chart Pin Header Socket or Receptacle Side Right Angle Type with lock Two pieces of 1.27mm pitch cable used a2.54 pitch connector (MIL-C-83503) HIF2B series HIF3B series HIF5 series Straight Type with lock Ribbon cable FD (D sub) connector Ribbon cable RC30 (Micro ribbon) connector Right Angle Type with mounting hole Right Angle Type with mounting hole Straight Type with mounting hole Straight Type with mounting hole Right Angle Type without mounting hole Right Angle Type without mounting hole Straight Type without mounting hole Straight Type without mounting hole A118 sCable ID Connector Unit: mm Unit: mm Part Number HIF6-020D-1.27R HIF6-026D-1.27R HIF6-032D-1.27R HIF6-034D-1.27R HIF6-040D-1.27R HIF6-050D-1.27R HIF6-052D-1.27R HIF6-060D-1.27R HIF6-068D-1.27R HIF6-080D-1.27R HIF6-100D-1.27R CL No. 630-0001-4 630-0002-7 630-0003-0 630-0004-2 630-0005-5 630-0006-8 630-0007-0 630-0008-3 630-0009-6 630-0010-5 630-0011-8 Number of Contacts 20 26 32 34 40 50 52 60 68 80 100 A 18.55 22.36 26.17 27.44 31.25 37.60 38.87 43.95 49.03 56.65 69.35 B 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 C 13.95 17.76 21.57 22.84 26.65 33.00 34.27 39.35 44.43 52.05 64.75 D 16.35 20.16 23.97 25.24 29.05 35.40 36.67 41.75 46.83 54.45 67.15 A119 sPin Header Right Angle Type with lock Unit: mm n= Number of Contacts 2 Note : Size F indicates the state where the lock is open. BPCB mounting pattern q Indicate Mating Side mark position. Mating Side Unit: mm Part Number HIF6-020PA-1.27DS HIF6-026PA-1.27DS HIF6-032PA-1.27DS HIF6-034PA-1.27DS HIF6-040PA-1.27DS HIF6-050PA-1.27DS HIF6-052PA-1.27DS HIF6-060PA-1.27DS HIF6-068PA-1.27DS HIF6-080PA-1.27DS HIF6-100PA-1.27DS CL No. 630-0051-2 630-0052-5 630-0053-8 630-0054-0 630-0055-3 630-0056-6 630-0057-9 630-0058-1 630-0059-4 630-0060-3 630-0061-6 Number of Contacts 20 26 32 34 40 50 52 60 68 80 100 A 30.95 34.76 38.57 39.84 43.65 50.00 51.27 56.35 61.43 69.05 81.75 B 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 C 24.55 28.36 32.17 33.44 37.25 43.60 44.87 49.95 55.03 62.65 75.35 D 18.75 22.56 26.37 27.64 31.45 37.80 39.07 44.15 49.23 56.85 69.55 E 21.59 25.40 29.21 30.48 34.29 40.64 41.91 46.99 52.07 59.69 72.39 F 43.55 47.36 51.17 52.44 56.25 62.60 63.87 68.95 74.03 81.65 94.35 A120 sPin Header Straight Type with lock Unit: mm n= Number of Contacts 2 BPCB mounting pattern Guide Key Side (20, 32, 40, 52, 60, 68, 80, 100 contacts) (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side q Indicate mark position. (26, 34, 50 contacts) Note : Size F indicates a state where the lock is open. (26, 34, 50 contacts) Unit: mm Part Number HIF6-020PA-1.27DSA HIF6-026PA-1.27DSA HIF6-032PA-1.27DSA HIF6-034PA-1.27DSA HIF6-040PA-1.27DSA HIF6-050PA-1.27DSA HIF6-052PA-1.27DSA HIF6-060PA-1.27DSA HIF6-068PA-1.27DSA HIF6-080PA-1.27DSA HIF6-100PA-1.27DSA CL No. 630-0101-9 630-0102-1 630-0103-4 630-0104-7 630-0105-0 630-0106-2 630-0107-5 630-0108-8 630-0109-0 630-0110-0 630-0111-2 Number of Contacts 20 26 32 34 40 50 52 60 68 80 100 A 30.95 34.76 38.57 39.84 43.65 50.00 51.27 56.35 61.43 69.05 81.75 B 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 C 24.55 28.36 32.17 33.44 37.25 43.60 44.87 49.95 55.03 62.65 75.35 D 18.75 22.56 26.37 27.64 31.45 37.80 39.07 44.15 49.23 56.85 69.55 E 14.95 18.76 22.57 23.84 27.65 34.00 35.27 40.35 45.43 53.05 65.75 F 21.59 25.40 29.21 30.48 34.29 40.64 41.91 46.99 52.07 59.69 72.39 G 43.55 47.36 51.17 52.44 56.25 62.60 63.87 68.95 74.03 81.65 94.35 A121 sReceptacle Right Angle Type with Mounting hole Unit: mm n= Number of Contacts 2 BPCB mounting pattern Mating Side BApplication Pattern (20, 32, 40, 52, 60, 68, 80 contacts) Mating Side Mounting hole center line (26, 34, 50 contacts) Unit: mm Part Number HIF6B-20DA-1.27DS HIF6B-26DA-1.27DS HIF6B-32DA-1.27DS HIF6B-34DA-1.27DS HIF6B-40DA-1.27DS *Lock pin type is also available. HIF6B-50DA-1.27DS HIF6B-52DA-1.27DS HIF6B-60DA-1.27DS HIF6B-68DA-1.27DS HIF6B-80DA-1.27DS CL No. 631-0051-9 631-0052-1 631-0053-4 631-0054-7 631-0055-0 631-0056-2 631-0057-5 631-0058-8 631-0059-0 631-0060-0 Number of Contacts 20 26 32 34 40 50 52 60 68 80 A 30.95 34.76 38.57 39.84 43.65 50.00 51.27 56.35 61.43 69.05 B 20.95 24.76 28.57 29.84 33.65 40.00 41.27 46.35 51.43 59.05 C 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 D 26.67 30.48 34.29 35.56 39.37 45.72 46.99 52.07 57.15 64.77 E 18.55 22.36 26.17 27.44 31.25 37.60 38.87 43.95 49.03 56.65 A122 sReceptacle Right Angle Type Without Mounting hole Unit: mm n= Number of Contacts 2 BPCB mounting pattern Mating Side BApplication Pattern (20, 32, 40, 52, 60, 68, 80 contacts) Mating Side (26, 34, 50 contacts) Unit: mm Part Number HIF6A-20DA-1.27DS HIF6A-26DA-1.27DS HIF6A-32DA-1.27DS HIF6A-34DA-1.27DS HIF6A-40DA-1.27DS HIF6A-50DA-1.27DS HIF6A-52DA-1.27DS HIF6A-60DA-1.27DS HIF6A-68DA-1.27DS HIF6A-80DA-1.27DS CL No. 631-0001-0 631-0002-3 631-0003-6 631-0004-9 631-0005-1 631-0006-4 631-0007-7 631-0008-0 631-0009-2 631-0010-1 Number of Contacts 20 26 32 34 40 50 52 60 68 80 A 20.95 24.76 28.57 29.84 33.65 40.00 41.27 46.35 51.43 59.05 B 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 C 18.55 22.36 26.17 27.44 31.25 37.60 38.87 43.95 49.03 56.65 A123 sReceptacle Straight Type with Mounting hole Unit: mm n= Number of Contacts 2 (20, 32, 40, 52, 60, 68, 80, 100 contacts) BPCB mounting pattern Guide Key Side (26, 34, 50 contacts) BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side Mounting hole center line (26, 34, 50 contacts) Unit: mm Part Number HIF6B-020DA-1.27DSA HIF6B-026DA-1.27DSA HIF6B-032DA-1.27DSA HIF6B-034DA-1.27DSA HIF6B-040DA-1.27DSA *Lock pin type is also available. HIF6B-050DA-1.27DSA HIF6B-052DA-1.27DSA HIF6B-060DA-1.27DSA HIF6B-068DA-1.27DSA HIF6B-080DA-1.27DSA HIF6B-100DA-1.27DSA CL No. 631-0151-3 631-0152-6 631-0153-9 631-0154-1 631-0155-4 631-0156-7 631-0157-0 631-0158-2 631-0159-5 631-0160-4 631-0161-7 Number of Contacts 20 26 32 34 40 50 52 60 68 80 100 A 30.95 34.76 38.57 39.84 43.65 50.00 51.27 56.35 61.43 69.05 81.75 B 26.67 30.48 34.29 35.56 39.37 45.72 46.99 52.07 57.15 64.77 77.47 C 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 D 18.55 22.36 26.17 27.44 31.25 37.60 38.87 43.95 49.03 56.65 69.35 A124 sReceptacle Straight Type without Mounting hole Unit: mm n= Number of Contacts 2 (20, 32, 40, 52, 60, 68, 80, 100 contacts) BPCB mounting pattern Guide Key Side (26, 34, 50 contacts) BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side (26, 34, 50 contacts) Unit: mm Part Number HIF6A-020DA-1.27DSA HIF6A-026DA-1.27DSA HIF6A-032DA-1.27DSA HIF6A-034DA-1.27DSA HIF6A-040DA-1.27DSA HIF6A-050DA-1.27DSA HIF6A-052DA-1.27DSA HIF6A-060DA-1.27DSA HIF6A-068DA-1.27DSA HIF6A-080DA-1.27DSA HIF6A-100DA-1.27DSA CL No. 631-0101-5 631-0102-8 631-0103-0 631-0104-3 631-0105-6 631-0106-9 631-0107-1 631-0108-4 631-0109-7 631-0110-6 631-0111-9 Number of Contacts 20 26 32 34 40 50 52 60 68 80 100 A 20.95 24.76 28.57 29.84 33.65 40.00 41.27 46.35 51.43 59.05 71.75 B 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 C 18.55 22.36 26.17 27.44 31.25 37.60 38.87 43.95 49.03 56.65 69.35 A125 sPin Header Right Angle Type with Mounting hole Unit: mm n= Number of Contacts 2 BPCB mounting pattern Mating Side BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Mating Side Mounting hole center line (26, 34, 50 contacts) Unit: mm Part Number HIF6B-020PA-1.27DS HIF6B-026PA-1.27DS HIF6B-032PA-1.27DS HIF6B-034PA-1.27DS HIF6B-040PA-1.27DS πLock pin type is also available. HIF6B-050PA-1.27DS HIF6B-052PA-1.27DS HIF6B-060PA-1.27DS HIF6B-068PA-1.27DS HIF6B-080PA-1.27DS HIF6B-100PA-1.27DS CL No. 631-0251-8 631-0252-0 631-0253-3 631-0254-6 631-0255-9 631-0256-1 631-0257-4 631-0258-7 631-0259-0 631-0260-9 631-0261-1 Number of Contacts 20 26 32 34 40 50 52 60 68 80 100 A 30.95 34.76 38.57 39.84 43.65 50.00 51.27 56.35 61.43 69.05 81.75 B 20.95 24.76 28.57 29.84 33.65 40.00 41.27 46.35 51.43 59.05 71.75 C 18.75 22.56 26.37 27.64 31.45 37.80 39.07 44.15 49.23 56.85 69.55 D 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 E 26.67 30.48 34.29 35.56 39.37 45.72 46.99 52.07 57.15 64.77 77.47 A126 sPin Header Right Angle Type Without Mounting hole Unit: mm n= Number of Contacts 2 BPCB mounting pattern Mating Side BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Mating Side (26, 34, 50 contacts) Unit: mm Part Number HIF6A-020PA-1.27DS HIF6A-026PA-1.27DS HIF6A-032PA-1.27DS HIF6A-034PA-1.27DS HIF6A-040PA-1.27DS HIF6A-050PA-1.27DS HIF6A-052PA-1.27DS HIF6A-060PA-1.27DS HIF6A-068PA-1.27DS HIF6A-080PA-1.27DS HIF6A-100PA-1.27DS CL No. 631-0201-0 631-0202-2 631-0203-5 631-0204-8 631-0205-0 631-0206-3 631-0207-6 631-0208-9 631-0209-1 631-0210-0 631-0211-3 Number of Contacts 20 26 32 34 40 50 52 60 68 80 100 A 20.95 24.76 28.57 29.84 33.65 40.00 41.27 46.35 51.43 59.05 71.75 B 18.75 22.56 26.37 27.64 31.45 37.80 39.07 44.15 49.23 56.85 69.55 C 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 A127 sPin Header Straight Type with Mounting hole Unit: mm n= Number of Contacts 2 (20, 32, 40, 52, 60, 68, 80, 100 contacts) BPCB mounting pattern Guide Key Side (26, 34, 50 contacts) BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side Mounting hole center line (26, 34, 50 contacts) Unit: mm Part Number HIF6B-020PA-1.27DSA HIF6B-026PA-1.27DSA HIF6B-032PA-1.27DSA HIF6B-034PA-1.27DSA HIF6B-040PA-1.27DSA *Lock pin type is also available. HIF6B-050PA-1.27DSA HIF6B-052PA-1.27DSA HIF6B-060PA-1.27DSA HIF6B-068PA-1.27DSA HIF6B-080PA-1.27DSA HIF6B-100PA-1.27DSA CL No. 631-0351-2 631-0352-5 631-0353-8 631-0354-0 631-0355-3 631-0356-6 631-0357-9 631-0358-1 631-0359-4 631-0360-3 631-0361-6 Number of Contacts 20 26 32 34 40 50 52 60 68 80 100 A 30.95 34.76 38.57 39.84 43.65 50.00 51.27 56.35 61.43 69.05 81.75 B 26.67 30.48 34.29 35.56 39.37 45.72 46.99 52.07 57.15 64.77 77.47 C 20.95 24.76 28.57 29.84 33.65 40.00 41.27 46.35 51.43 59.05 71.75 D 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 E 18.75 22.56 26.37 27.64 31.45 37.80 39.07 44.15 49.23 56.85 69.55 A128 sPin Header Straight Type Without Mounting hole Unit: mm n= Number of Contacts 2 (20, 32, 40, 52, 60, 68, 80, 100 contacts) BPCB mounting pattern Guide Key Side (26, 34, 50 contacts) BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side (26, 34, 50 contacts) Unit: mm Part Number HIF6A-020PA-1.27DSA HIF6A-026PA-1.27DSA HIF6A-032PA-1.27DSA HIF6A-034PA-1.27DSA HIF6A-040PA-1.27DSA HIF6A-050PA-1.27DSA HIF6A-052PA-1.27DSA HIF6A-060PA-1.27DSA HIF6A-068PA-1.27DSA HIF6A-080PA-1.27DSA HIF6A-100PA-1.27DSA CL No. 631-0301-4 631-0302-7 631-0303-0 631-0304-2 631-0305-5 631-0306-8 631-0307-0 631-0308-3 631-0309-6 631-0310-5 631-0311-8 Number of Contacts 20 26 32 34 40 50 52 60 68 80 100 A 20.95 24.76 28.57 29.84 33.65 40.00 41.27 46.35 51.43 59.05 71.75 B 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 C 18.75 22.56 26.37 27.64 31.45 37.80 39.07 44.15 49.23 56.85 69.55 A129 BConnection Circuit Type A, B (20, 32, 40, 52, 60, 68, 80, 100 contacts) Number of Contacts 2 n= Connection of Cable 1 A1 A2 an an 1 Connection of Cable 2 B1 B2 bn bn 1 ······ ······ An a1 ······ Bn b1 Type A, A Connection of Cable 1 A1 A2 b1 b2 Connection of Cable 2 B1 B2 a1 a2 ······ ······ ······ An bn Bn an A130 ······ ······ BConnection Circuit Type A, B (26, 40, 50 contacts) Number of Contacts 2 n= Connection of Cable 1 A1 A2 an an 1 Connection of Cable 2 B1 B2 bn bn 1 ······ ······ An a1 ······ Bn b1 Type A, A Connection of Cable 1 A1 A2 b1 b2 Connection of Cable 2 B1 B2 a1 a2 ······ ······ ······ An bn Bn an ······ ······ A131 BConnection Jig qGuide Plate qHi-Flex Connection Press Hi-Flex Connection Press HHP502 CL550 - 0082 - 2 HIF 6 - GPA CL550 - 0165 - 8 *Pressing Block Part Number Pressing Block A-01 CL No. 550-0133-1 qCable Cutter qInstruction Manual for HIF6 Connection Service Method HIF6 Cable Cutter-FC601 CL550 - 0166 - 0 14 Pages A132 sHIF6 Series: Connection Type Coupled Connector HIF3B Series (MIL-C-83503) qCompliant with the MIL standard qThe VA idea is reflected on both pin header and socket. qProducts with pull-out tab are available. qCountermeasures are taken against noises in combination with the applicable cover case. qThe type aligned in single-row, low profile type, is available for pin header locking system, in addition to standard products. Number of contacts: 6, 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64 HIF2 Series (Board direct mount type) 12-row parallel type (HIF2E) Number of contacts: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60 2.54mm grid alignment facilitates to the design pattern. 24-row staggered type (HIF2C) Number of contacts: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60 Mounting height is 4.9mm low profile type. 1 2 HIF5 Series (Card edge ribbon type) qThree types of full hole, semi-hole and no mount area are provided for the unit mount area. qConnectors are connected in the bus line system. qCables can be returned within the connector mold width. Number of contacts: 20, 26, 34, 40, 50, 60 RC Series (Micro ribbon connector) qSince the cable insulation displacement area is standard pitch 1.27mm, the standard ribbon cable can be easily utilized. qCountermeasures are taken against noises in combination with the cover case. qCover case is light weight and compact. qStraight and right angle types are installed on the dip side. Number of contacts: 14, 24, 36, 50 FD Series (D sub-ribbon connector) qThe standard pitch 1.27mm ribbon cable can be insulated and displaced by replacing a jig, in addition to the same pitch 1.38mm as for the D sub connector. qThe space saving type allows to reduce the thickness on the connection side according to set miniaturization. qConnectors can be installed from both front and rear sides of the chassis or panel. Number of contacts: 9, 15, 25, 37 A133