HIF6H-80PA-1.27DSA

1.27 Pitch Coaxial Ribbon Cable Connector HIF6R Series Connection Type sFeatures 1.Coaxial Ribbon Cable Connector Assemble 1.27mm pitch coaxial ribbon cable AWG#30 in insulation displacement at a time. Usable cable characteristic impedance is 50 ohms. Applicable Coaxial Ribbon Cable 2. Compatibility The pin header side is HIF3 series. 3. Short Preventive Mechanism The socket side is equipped with a convex portion in order to prevent false-insertion. sApplications Computers, peripheral and terminal equipment, communication transmission equipment, medical electronic apparatuses, measuring instruments, other various office automation machines, etc. sProduct Specifications Rating Item Current rating: 0.5A Voltage rating: 30V AC Operating Temperature Range:-55 to +85ç (Note 1) Storage Temperature Range:-10 to +60ç (Note 2) Storage Humidity Range: 40 to 70% Operating Humidity Range:40 to 80% Condition 250V DC 300V AC/1 minute 0.1mA Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% (-65ç: 30 minutes➝15 to 35ç: 5 minutes max. 125ç: 30 minutes➝15 to 35ç: 5 minutes max.)5 cycles 500 cycles Flow: 260ç for 10 seconds Manual soldering: 300ç for 3 seconds Specification 1.Insulation Resistance 1000M ohms min. 2.Withstanding voltage No flashover or insulation breakdown. 3.Contact Resistance 30m ohms max. 4.Vibration No electrical discontinuity of 1µs or more 5.Humidity (Steady state) Insulation resistance: 1000M ohms min. 6.Temperature Cycle No damage, cracks, or parts looseness. 7.Durability Contact resistance: signal: 30m ohms max (Mating/un-mating) 8.Resistance to Soldering heat No deformation of components affecting performance. Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. D19 sMaterial Part Insulator Socket Contact Metal clamp Material PBT Copper alloy Stainless steel Finish Black Selective gold plated --------------Remarks UL94V-0 ----------------------------- sOrdering Information HIF6 1 R - * S D - AA - L 2 3 4 5 6 7 1 Series Name: HIF 2 Coaxial ribbon cable: R 3 Number of Contacts: 40, 80, 100 4 5 S: Socket D: Characteristic impedance: 50 ohms Shortest: 10cm 6 Cable length (cm) sSocket q Type AA (50 ohms) Unit: mm Part Number HIF6R-040SD-AA-L HIF6R-080SD-AA-L HIF6R-100SD-AA-L Number of CL ontacts C No. Number of Contacts A 31.25 56.65 69.35 630-7003-8 630-7002-5 630-7001-2 40 80 100 D20 sPin Header HIR6R series engages in or from the pin header mounted on the printed board. Please use the HIF6H series connector for the pin header. q HIF6H Right Angle Type BPCB mounting pattern Unit: mm Part Number HIF6H-040PA-1.27DS HIF6H-080PA-1.27DS HIF6H-100PA-1.27DS CL No. 630-0161-0 630-0164-9 630-0165-1 Number of Contacts A B C D E F 40 43.65 24.13 42.05 31.45 34.29 63.45 80 69.05 49.53 67.45 56.85 59.69 88.85 100 81.75 62.23 80.15 69.55 72.39 101.5 q HIF6H Straight Type BPCB mounting pattern Unit: mm Part Number HIF6H-40PA-1.27DSA HIF6H-80PA-1.27DSA HIF6H-100PA-1.27DSA CL No. 630-0171-4 630-0174-2 630-0175-5 Number of Contacts A B C D E F G 40 43.65 24.13 42.05 31.45 27.65 34.29 63.45 80 69.05 49.53 67.45 56.85 53.05 59.69 88.85 100 81.75 62.23 80.15 69.55 65.75 72.39 101.55 D21 BConnection Circuit Diagram Note: The ground terminal should be used commonly on the printed board side. BSignal Alignment q Socket (Cable) side q Pin Header (Board) Side Note: The ground terminal should be used commonly on the printed board side. BCoaxial Ribbon Cable Specification Electrical Characteristics Impedance Static Capacitance Delay Time Inner Conductor Dielectric material External conductor Jacket Cable mark Core wire number Thickness Width UL Style No. 50±5 ohms 80PF/m 3.9ns/m Ø0.26mm, silver plated copper wire Foaming fluorine resin Aluminum foil Ø0.26mm, silver plated copper wire PVC (gray) Yellow 20,40,50 1.2mm Max. Conductor Resistance 360 ohms/km Usable Materials qCautions for Handling Cables (1) Don't round the cable. (2) Don't fold the cable in two at bending radius R25 or less (180 deg.). (3) Don't fold the cable in two in order to change the direction. Coaxial Ribbon Cable Specification Size Construction *N∞1.27mm 20182 Note: N= number of contacts D22