HMU-PAT-FH-K110

MU Type Optical In-Line Attenuators MU MU Multi-position Mounting SC Fig.1 FC sFeatures 1. Smaller package Hirose’s original design combines a plug and attenuator into the same connector size of a standard MU plug,and the superior design enable to save a space using 4.5 mm pitch MU multiple adapters as shown in Fig. 1 and 2. Save 16.7mm space Attenuator - MU Plug configuration 16.7mm Harsh Environment 2. Easy to Change attenuation level Easy to change the attenuation level by exchanging the attenuatin part with a simple push-twist lock as shown in Fig.3(See page 80).15 levels of attenuation are currently available : 0,1,2,3,4,5,6,7,8,9,10,12.5,15,17.5,and 20 dB Adapter - MU MU plug Attenuator - MU PJ configuration Fig.2 3. Insertion and extraction tool The MU standard tool is available as shown in Fig. 4. Easy to change an attenuation part Attenuators 4. Maximum input power :100mW 5. Please contact us if you have any requests. Hirose will offer excellent solutions to meet your requirements. Back harness Attenuation part sApplications Power level adjustment of optical fiber communication networks. Fig.3 MU standard tool is available Terminators Fig.4 65 sProduct Specifications Operation temperature range Ratings -25°C to +70°C 100mW Storage temperature range Fiber type -25°C to +70°C SM Max. Input Power MU Item Test Method Specifications Attenuation Tolerance 0dB ≤0.5dB 1,2dB ±0.5dB 3,4,5,6dB ±0.8dB 7,8,9dB ±1.0dB 10dB ±1.2dB 12.5,15,17.5,20dB ±ATT∞10%dB ≥40dB Engagement force: ≤12.5 N Separation force: ≤12.5 N Optical Characteristis Attenuation Measurement at a point within the wavelength of 1310 ± 30 nm, and a point within the wavelength of 1550 ± 30 nm. SC Harsh Environment Return Loss(R.L.) Engagement and Engagement and separation forces at 50mm/s. separation forces Gauge retention force Zirconia gauge at Ø1.249 ± 0.0005 mm. Insertion and extraction number for connectors:500 Mating durability Insertion and extraction number for an attenuation element:50 For 3 hours at an amplitude of 1.5mm.with the frequency range 10 to 55Hz. Vibration In each of three mutually perpendicular plane. 3 times in each of three mutually perpendicular axis with the Shock acceleration 981m/s2. Humidity : 90% to 96% Compasite Temparature-humidity Temperature : -10°C to 65°C, Cyclic test Cyclic : 10 cycles(240 hours) Temp : 25/-25/-25/70/70/25°C Temperature cycling Time : 15 30 30 30 15 min Cyclic : 10 cycles Temperature : 85°C Time : 500 hours Dry heat Temperature : -25°C Time : 500 hours Cold Salt Mist : 5% Time : 48 hours Salt Mist Mechanical Characteristis 1.0N to 2.5N Environmental Characteristis 1) Attenuation shall be satisfild after the test. 2) No breakage,crack or looseness on components. FC No significant corrosion. sMaterials Part Body Ferrule Split sleeve Material Zinc alloy Zirconia Zirconia Attenuators sOrdering Information HMU - PAT - FH - K 1 01 1 Terminators 2 3 4 5 6 1 Series name : HMU 2 Indicates a in-line type attenuator 3 Indicates the attenuation part 4 Polishing type 6 Attenuation K:AdPC 5 Applicable optical fiber 1:SM 00:0 dB (Through)12:12.5dB,17:17.5dB 01 to N: Attenuation (dB) Note: This attenuator is used only with the cable assembly shown on the next page. 66 sIn-line attenuators S M 4.4 6.6 23.7 MU 20 dB MU-AT SC Part Number HMU-PAT-FH-K100 HMU-PAT-FH-K101 HMU-PAT-FH-K102 HMU-PAT-FH-K103 HMU-PAT-FH-K104 HMU-PAT-FH-K105 HMU-PAT-FH-K106 HMU-PAT-FH-K107 HMU-PAT-FH-K108 HMU-PAT-FH-K109 HMU-PAT-FH-K110 HMU-PAT-FH-K112 HMU-PAT-FH-K115 HMU-PAT-FH-K117 HMU-PAT-FH-K120 CL No. 827-0001-8 827-0002-0 827-0003-3 827-0004-6 827-0005-9 827-0006-1 827-0007-4 827-0011-1 827-0012-4 827-0013-7 827-0008-7 827-0014-0 827-0009-0 827-0015-2 827-0010-9 Attenuation 10.5dB 11.5dB 12.5dB 13.5dB 14.5dB 15.5dB 16.5dB 17.5dB 18.5dB 19.5dB 10.5dB 12.5dB 15.5dB 17.5dB 20.5dB Specification 0.5dB max. ±0.5dB Return loss Wavelength Split sleeve Fiber type ±0.8dB 1310nm 1550nm FC ≥40dB ±1dB ±1.2dB ±ATT∞10%dB Zirconia SM Harsh Environment sBack Cable Assembly (2mm diameter cable type) Back harness The back cable assembly is supplied by Hirose. Please contact your Hirose sales representative for details concerning your back cable needs, including cable length and mating connector requirements. Attenuators HRS JPN ππππ L( +10 %)m 0 sOrdering Information (Back cable assembly) HMU - PAT 1 1 Series Name HMU 2 Indicates a in-line type attenuator 3 Indicate a back cable assembly 4 Mating connector (Note) 2 BH 3 101 K Q - L 4 5 6 7 Terminators 5 Polishing type K: AdPC 6 Fiber cable type(Note) Q: SM-9.5/125, diameter 2mm Jacket color: Yellow 7 Cable length Unit: Meters 011 : FC connector, 2 mm diameter cable 04G : SC connector, 2 mm diameter cable 101 : MU connector, 2 mm diameter cable Note: These are examples of offered cable assemblies. They will differ depending on the applicable cable diameter and the type of boot. For exact cable assembly specifications, specify the connector type at the mating side and the required total length. Contact your Hirose Electric account representative. 67 BProcedure for Changing the Attenuator Element Insertion Procedure MU SC qAlign the triangle mark of the boot on the back cable assembly with the black indexing mark on the attenuator. wInsert the back cable assembly into the attenuator. eTurn right the back cable assembly to engage connection lock. After turning, the triangle mark of the boot will be aligned with the attenuation label. Withdrawal Procedure FC Harsh Environment qPress the back c able assembly toward the attenuator. wTurn right the back cable assembly and release the lock. ePull away the back cable assembly. Terminators Attenuators 68